"""Constants for localtuya integration.""" ATTR_CURRENT = "current" ATTR_CURRENT_CONSUMPTION = "current_consumption" ATTR_VOLTAGE = "voltage" CONF_LOCAL_KEY = "local_key" CONF_PROTOCOL_VERSION = "protocol_version" CONF_DPS_STRINGS = "dps_strings" CONF_PRODUCT_KEY = "product_key" # light CONF_BRIGHTNESS_LOWER = "brightness_lower" CONF_BRIGHTNESS_UPPER = "brightness_upper" CONF_COLOR = "color" CONF_COLOR_MODE = "color_mode" CONF_COLOR_TEMP_MIN_KELVIN = "color_temp_min_kelvin" CONF_COLOR_TEMP_MAX_KELVIN = "color_temp_max_kelvin" CONF_COLOR_TEMP_REVERSE = "color_temp_reverse" CONF_MUSIC_MODE = "music_mode" # switch CONF_CURRENT = "current" CONF_CURRENT_CONSUMPTION = "current_consumption" CONF_VOLTAGE = "voltage" # cover CONF_COMMANDS_SET = "commands_set" CONF_POSITIONING_MODE = "positioning_mode" CONF_CURRENT_POSITION_DP = "current_position_dp" CONF_SET_POSITION_DP = "set_position_dp" CONF_POSITION_INVERTED = "position_inverted" CONF_SPAN_TIME = "span_time" # fan CONF_FAN_SPEED_CONTROL = "fan_speed_control" CONF_FAN_OSCILLATING_CONTROL = "fan_oscillating_control" CONF_FAN_SPEED_MIN = "fan_speed_min" CONF_FAN_SPEED_MAX = "fan_speed_max" CONF_FAN_ORDERED_LIST = "fan_speed_ordered_list" CONF_FAN_DIRECTION = "fan_direction" CONF_FAN_DIRECTION_FWD = "fan_direction_forward" CONF_FAN_DIRECTION_REV = "fan_direction_reverse" # sensor CONF_SCALING = "scaling" # climate CONF_TARGET_TEMPERATURE_DP = "target_temperature_dp" CONF_CURRENT_TEMPERATURE_DP = "current_temperature_dp" CONF_TEMPERATURE_STEP = "temperature_step" CONF_MAX_TEMP_DP = "max_temperature_dp" CONF_MIN_TEMP_DP = "min_temperature_dp" CONF_PRECISION = "precision" CONF_TARGET_PRECISION = "target_precision" CONF_HVAC_MODE_DP = "hvac_mode_dp" CONF_HVAC_MODE_SET = "hvac_mode_set" CONF_PRESET_DP = "preset_dp" CONF_PRESET_SET = "preset_set" CONF_HEURISTIC_ACTION = "heuristic_action" CONF_HVAC_ACTION_DP = "hvac_action_dp" CONF_HVAC_ACTION_SET = "hvac_action_set" CONF_ECO_DP = "eco_dp" CONF_ECO_VALUE = "eco_value" # vacuum CONF_POWERGO_DP = "powergo_dp" CONF_IDLE_STATUS_VALUE = "idle_status_value" CONF_RETURNING_STATUS_VALUE = "returning_status_value" CONF_DOCKED_STATUS_VALUE = "docked_status_value" CONF_BATTERY_DP = "battery_dp" CONF_MODE_DP = "mode_dp" CONF_MODES = "modes" CONF_FAN_SPEED_DP = "fan_speed_dp" CONF_FAN_SPEEDS = "fan_speeds" CONF_CLEAN_TIME_DP = "clean_time_dp" CONF_CLEAN_AREA_DP = "clean_area_dp" CONF_CLEAN_RECORD_DP = "clean_record_dp" CONF_LOCATE_DP = "locate_dp" CONF_FAULT_DP = "fault_dp" CONF_PAUSED_STATE = "paused_state" CONF_RETURN_MODE = "return_mode" CONF_STOP_STATUS = "stop_status" DATA_DISCOVERY = "discovery" DOMAIN = "localtuya" # Platforms in this list must support config flows PLATFORMS = [ "binary_sensor", "climate", "cover", "fan", "light", "number", "select", "sensor", "switch", "vacuum", ] TUYA_DEVICE = "tuya_device"