From a7c1acf691c3d6ac282e74a65675a139c8bd3712 Mon Sep 17 00:00:00 2001
From: Christopher Fenner <CFenner@users.noreply.github.com>
Date: Tue, 2 May 2017 01:35:53 +0200
Subject: [PATCH] fix headlines

---
 Auto-Starting-MagicMirror.md | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/Auto-Starting-MagicMirror.md b/Auto-Starting-MagicMirror.md
index 0faaeab..664e53e 100644
--- a/Auto-Starting-MagicMirror.md
+++ b/Auto-Starting-MagicMirror.md
@@ -1,70 +1,70 @@
-#Auto Starting MagicMirror
+# Auto Starting MagicMirror
 The methods below describe ways to automatically start you MagicMirror on boot, and even ways to keep it running in case of a failure. 
 
-##Using PM2
+## Using PM2
 PM2 is a production process manager for Node.js applications with a built-in load balancer. It allows you to keep applications alive forever, to reload them without downtime and to facilitate common system admin tasks. In this case we will use it to keep a shell script running.
 
-###Install PM2
+### Install PM2
 Install PM2 using NPM:
 ````
 sudo npm install -g pm2
 ````
 
-###Starting PM2 on Boot
+### Starting PM2 on Boot
 To make sure PM2 can do it's job when (re)booting your operating system, it needs to be started on boot. Luckily, PM2 has a handy helper for this. 
 ````
 pm2 startup
 ````
 PM2 will now show you a command you need to execute.
 
-###Make a MagicMirror start script.
+### Make a MagicMirror start script.
 To use PM2 in combination with MagicMirror, we need to make a simple shell script. Preferable, we put this script outside the MagicMirror folder to make sure it won't give us any issues if we want to upgrade the mirror.
-````
+````shell
 cd ~
 nano mm.sh
 ````
 Add the following lines:
-````
+````shell
 cd ~/MagicMirror
 DISPLAY=:0 npm start
 ````
 Save and close, using the commands `CTRL-O` and `CTRL-X`.
 Now make sure the shell script is executable bij performing the following command:
-````
+````shell
 chmod +x mm.sh
 ````
 You are now ready to the MagicMirror using this script using PM2.
 
-###Starting your MagicMirror with PM2
+### Starting your MagicMirror with PM2
 Simply start your mirror with the following command:
-````
+````shell
 pm2 start mm.sh
 ````
 You mirror should now boot up and appear on your screen after a few seconds.
 
-###Enable restarting of the MagicMirror script.
+### Enable restarting of the MagicMirror script.
 To make sure the MagicMirror restarts after rebooting, you need to save the current state of all scripts running via PM2. To do this, execute the following command
-````
+````shell
 pm2 save
 ````
 
 And that's all there is! You MagicMirror should now reboot after start, and restart after any failure.
 
-###Controlling you MagicMirror via PM2.
+### Controlling you MagicMirror via PM2.
 With your MagicMirror running via PM2, you have some handy tools at hand:
 #### Restarting your MagicMirror
-````
+````shell
 pm2 restart mm
 ````
 #### Stopping your MagicMirror
-````
+````shell
 pm2 stop mm
 ````
 #### Show the MagicMirror logs
-````
+````shell
 pm2 logs mm
 ````
 #### Show the MagicMirror process information
-````
+````shell
 pm2 show mm
 ````
\ No newline at end of file