asterisk/configs/modem.conf.sample

;
; isdn4linux
;
; Configuration file
;
[interfaces]
;
; By default, incoming calls should come in on the "remote" context
;
context=remote
;
; Modem Drivers to load
;
driver=aopen	; modem by AOpen
;driver=i4l	; isdn4linux - an alternative to i4l is to use chan_capi
;
; Default language
;
;language=en
;
; We can optionally override the auto detection.  This is necessary
; particularly if asterisk does not know about our kind of modem.
;
;type=autodetect
;type=aopen
;
; We can strip a given number of digits on outgoing dialing, so, for example
; you can have it dial "8871042" when given "98871042".
;
stripmsd=0
;
; Type of dialing
;
dialtype=tone
;dialtype=pulse
;
; Mode selection.  "Immediate" means that as soon as you dial, you're connected
; and the line is considered up.  "Ring" means we wait until the ring cadence
; occurs at least once.  "Answer" means we wait until the other end picks up. 
;
;mode=answer
;mode=ring
mode=immediate
;
; List all devices we can use.
;
;device => /dev/ttyS3
;
; ISDN example (using i4l)
;
;msn=39907835
;device => /dev/ttyI0

;===============
; More complex ISDN example
;
; A single device which listens to 3 MSNs
; the wildcard '*' can be used when all MSN's should be accepted.
; (The incoming number can be used to go directly into the extension
; with the matching number. I.e. if MSN 33 is called, (context,33)
; will tried first, than (context,s) and finally (default,s).
;
;msn=50780020
;incomingmsn=50780020,50780021,50780022
;device => /dev/ttyI2
;
; If set, only these numbers are allowed to be set as A number
; when making an outbound call. callerid is used to set A
; number.
;outgoingmsn=50780023,50780024
;

; Set DTMF-detection/generation mode to:
;  asterisk: Let Asterisk do inband detection (default)
;  i4l:      Use the inband detection made by ISDN4Linux
;  none:     Don't detect inband DTMF
;  both:     Transmit using both in-band and out of band (generation only)
;
; You may specify either one mode, or the detection/generation mode
; individually separated by a '/'.
;
;dtmfmode=asterisk			; Detect using Asterisk
;dtmfmode=asterisk/both		; Detect using Asterisk, generate w/ both
; two other devices, which are in group '1' and are used when an
; outgoing dial used: exten => s,1,Dial,Modem/g1:1234|60|r
; (we do not need more outgoing devices, since ISDN2 has only 2 channels.)
; Lines can be in more than one group (0-63); comma separated list.
;
group=1		; group=1,2,3,9-12
;msn=50780023
;device => /dev/ttyI3
;device => /dev/ttyI4