asterisk/configs/misdn.conf.sample

;
; chan_misdn sample config
;

; general section:
;
; for debugging and general setup, things that are not bound to port groups
;

[general] 

; set debugging flag: 
;   0 - No Debug
;   1 - mISDN Messages and * - Messages, and * - State changes
;   2 - Messages + Message specific Informations (e.g. bearer capability)
;   3 - very Verbose, the above + lots of Driver specific infos
;   4 - even more Verbose than 3
;
; default value: 0
;
debug=0


; the big trace
;
; default value: [not set]
;
;tracefile=/var/log/misdn.trace

; single call trace files
; set to true if you want to have them
; they depend on debug level
;
; default values: trace_calls : false
;                 trace_dir   : /var/log/
;
trace_calls=false
trace_dir=/var/log/

; set to yes if you want mISDN_dsp to bridge the calls in HW
;
; default value: yes
;
bridging=no

; stops dialtone after getting first digit on nt Port
;
; default value: yes
;
stop_tone_after_first_digit=yes

; wether to append overlapdialed Digits to Extension or not 
;
; default value: yes
;
append_digits2exten=yes

; set this to yes if you have jollys mISDN which sends correct L1 Infos
;
; default value: yes
;
l1_info_ok=yes

; set this to yes if you want to clear the l3 in case the l2 deactivates
; some environments have a flickering l2 which causes this option to 
; damage active calls .. highly experimental
; 
; default value: no
;
clear_l3=no

;;; CRYPTION STUFF

; Wether to look for dynamic crypting attempt
;
; default value: no
;
dynamic_crypt=no

; crypt_prefix, what is used for crypting Protocol
;
; default value: [not set]
;
crypt_prefix=**

; Keys for cryption, you reference them in the dialplan
; later also in dynamic encr.
;
; default value: [not set]
;
crypt_keys=test,muh

; users sections:
; 
; name your sections as you which but not "general" ! 
; the secions are Groups, you can dial out in extensions.conf
; with Dial(mISDN/g:extern/101) where extern is a section name, 
; chan_misdn tries every port in this section to find a 
; new free channel
; 

; The default section is not a group section, it just contains config elements
; which are inherited by group sections.
;

[default]

; define your default context here
;
; default value: default
;
context=misdn

; language
;
; default value: en
;
language=en

;
; sets the musiconhold class
;
musicclass=default

;
; Either if we should produce DTMF Tones ourselve
; 
senddtmf=yes

; Prefixes for national and international, those are put before the 
; oad if an according dialplan is set by the other end. 
;
; default values: nationalprefix      : 0
;                 internationalprefix : 00
;
nationalprefix=0
internationalprefix=00

; set rx/tx gains between -8 and 8 to change the RX/TX Gain
;
; default values: rxgain: 0
;                 txgain: 0
;
rxgain=0
txgain=0

; some telcos espacially in NL seem to need this set to yes, also in 
; switzerland this seems to be important
;
; default value: no
;
te_choose_channel=no

; set the method to use for channel selection:
;   standard    - always choose the first free channel with the lowest number
;   round_robin - use the round robin algorithm to select a channel. use this
;                 if you want to balance your load.
;
; default value: standard
;
method=standard

;
; dialplan means Type Of Number in ISDN Terms (for outgoing calls)
;
; dialplan options: 
;
; 0 - unknown
; 1 - International
; 2 - National
; 4 - Subscriber
;
; This setting is used for outgoing calls
;
; default value: 0
;
dialplan=0
localdialplan=0

; This is only for asterisk head and will result in only considering 
; misdn.confs and misdn_set_opts callingpresentation informations if set to no.
; Otherwise asterisks callingpresentation overwrites misdn.confs settings.
;
; default value: yes
;
use_callingpres=yes



;
; turn this to no if you don't mind correct handling of Progress Indicators  
;
early_bconnect=yes

; uncomment the following to get into s extension at extension conf
; there you can use DigitTimeout if you can't or don't want to use
; isdn overlap dial. 
; note: This will jump into the s exten for every exten!
;
; default value: no
;
;always_immediate=no

; uncomment the following if you want callers which called exactly the 
; base number (so no extension is set) jump to the s extension.
; if the user dials something more it jumps to the correct extension 
; instead
;
; default value: no
;
;immediate=no

; uncomment the following to have hold and retrieve support
;
; default value: no
;
;hold_allowed=yes

; Pickup and Callgroup
;
; deafult values: not set = 0
;
;callgroup=1
;pickupgroup=1

; Allows/Screens Callerid
;
; possible values: allowed,not_screened
;
; be aware, if you set to allowed you need to set a correct 
; callerid in the dialplan or set it here in the misdn.conf
; Some Telcos don't care about wrong callerids, others do !
;
; default value: allowed
;
;presentation=not_screened

; this enables echocancellation, with the given number of taps
; be aware, move this setting only to outgoing portgroups!
; A value of zero turns echocancellation off.
;
; possible values are: 0,32,64,128,256,yes(=128),no(=0)
;
; default value: no
;
;echocancel=no

; this disables echocancellation when the call is bridged between 
; mISDN channels
;
; default value: no
;
echocancelwhenbridged=no

; Set this to no to disable echotraining
;
; default value: yes
;
echotraining=yes

;
; chan_misdns jitterbuffer, default 1000
; 
jitterbuffer=1000

;
; change this threshold to enable dejitter functionality
;
jitterbuffer_upper_threshold=0


[intern]
; define your ports, e.g. 1,2 (depends on mISDN-driver loading order) 
ports=1,2
; context where to go to when incoming Call on one of the above ports
context=Intern

[internPP]
; if you want to have pp Protocol on one nt Port, you need 
; to add a ptp directly after the portnumber, you can still add 
; more ports and multiple ptp adds in your config.
ports=3ptp
	
[first_extern]
; again port defs
ports=4
; again a context for incomming calls
context=Extern1
; msns for te ports, listen on those numbers on the above ports, and 
; indicate the incoming calls to asterisk
; here you can give a comma seperated list or simply an '*' for 
; any msn. 
msns=*

; here an example with given msns
[second_extern]
ports=5
context=Extern2
callerid=15
msns=102,144,101,104