Various spelling errors fixed in docs

git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@2175 65c4cc65-6c06-0410-ace0-fbb531ad65f3

doc/README.cdr

@@ -13,7 +13,7 @@ separated text file.
 Applications
 ------------
 
-    * Asterisk cmd setaccount: Set accound code for billing
+    * Asterisk cmd setaccount: Set account code for billing
     * Asterisk cmd NoCDR: Make sure no CDR is saved for a specific call
     * Asterisk cmd resetCDR: Reset CDR
     * Asterisk cmd authenticate - Authenticates and sets the account code
@@ -36,7 +36,7 @@ Fields of the CDR in Asterisk
    8. lastapp: Last application if appropriate (80 characters)
    9. lastdata: Last application data (arguments) (80 characters)
   10. start: Start of call (date/time)
-  11. answer: Anwer of call (date/time)
+  11. answer: Answer of call (date/time)
   12. end: End of call (date/time)
   13. duration: Total time in system, in seconds (integer), from dial to hangup
   14. billsec: Total time call is up, in seconds (integer), from answer to hangup

doc/README.iax

@@ -31,7 +31,7 @@ and H.323, some of which are:
 	* High performance, low overhead protocol
 	     When running on low-bandwidth connections, or when running 
 	     large numbers of calls, optimized bandwidth utilization is 
-	     imperitive.  IAX uses only 4 bytes of overhead
+	     imperative.  IAX uses only 4 bytes of overhead
 
 	* Internationalization support
 	     IAX transmits language information, so that remote PBX 
@@ -198,7 +198,7 @@ these packets, improving voice quality.
 
 > register => <name>[:<secret>]@<host>[:port]
 
-Any number of registery entries may be instantiated in the general 
+Any number of registry entries may be instantiated in the general 
 section.  Registration allows Asterisk to notify a remote Asterisk server 
 (with a fixed address) what our current address is.  In order for 
 registration to work, the remote Asterisk server will need to have a 
@@ -244,7 +244,7 @@ One or more context lines may be specified in a user, thus giving the user
 access to place calls in the given contexts.  Contexts are used by 
 Asterisk to divide dialing plans into logical units each with the ability 
 to have numbers interpreted differently, have their own security model, 
-auxilliary switch handling, and include other contexts.  Most users are 
+auxiliary switch handling, and include other contexts.  Most users are 
 given access to the default context.  Trusted users could be given access 
 to the local context for example.
 
@@ -265,7 +265,7 @@ whereas:
 > deny = 192.168.0.0/255.255.255.0
 > permit = 0.0.0.0/0.0.0.0
 
-would not deny anyone since the final rule would permit anyone, thsu 
+would not deny anyone since the final rule would permit anyone, thus 
 overriding the denial.  
 
 If no permit/deny rules are listed, it is assumed that someone may connect 
@@ -283,7 +283,7 @@ You may select which authentication methods are permitted to be used by
 the user to authenticate to us.  Multiple methods may be specified, 
 separated by commas.  If md5 or plaintext authentication is selected, a 
 secret must be provided.  If RSA authentication is specified, then one or 
-more key names must be specifed with "inkeys"
+more key names must be specified with "inkeys"
 
 If no secret is specified and no authentication method is specified, then 
 no authentication will be required.

doc/README.variables

@@ -1,4 +1,4 @@
-GENERAL ENCHANCEMENTS TO EXTENSION LOGIC : 
+GENERAL ENHANCEMENTS TO EXTENSION LOGIC : 
 
 QUOTING: 
 
@@ -9,7 +9,7 @@ comma does not terminate the field.
 
 Also, characters special to variable substitution, expression evaluation, etc
 (see below), can be quoted. For example, to literally use a $ on the 
-string "$1231", quote it with a preceeding \. Special characters that must
+string "$1231", quote it with a preceding \. Special characters that must
 be quoted to be used, are [ ] $ " \. (to write \ itself, use \\). 
 
 VARIABLES: 

doc/extensions.txt

@@ -1,7 +1,7 @@
 Extensions are routed according to priority, and may be based on any set
 of digits, #, and *.  For each extension, several actions may be listed
 and each given a priority.  When each action completes, it generally moves
-to the next priority (except for some modules which use explicity GOTO's. 
+to the next priority (except for some modules which use explicitly GOTO's. 
 Extensions frequently have data they pass to the executing application
 (most frequently a string).  There are some reserved application names: 
 
@@ -18,5 +18,5 @@ Also, there are some extensions with important meanings:
 
 And finally, the extension context "default" is used when either a) an 
 extension context is deleted while an extension is in use, or b) a specific
-starting extension handler has not been defined (unless overrridden by the
+starting extension handler has not been defined (unless overridden by the
 low level channel interface).

doc/localchannel.txt

@@ -11,7 +11,7 @@ Adding "/n" at the end of the string will make the Local channel not do a native
 
 * Purpose:
 
-The Local channel construct can be used to establish dialling into any part of the dialplan.
+The Local channel construct can be used to establish dialing into any part of the dialplan.
 
 Imagine you have a TE410P in your box. You want to do something for which you must use a Dial statement (for instance when dropping files in /var/spool/outgoing) but you do want to be able to use your dialplans least-cost-routes or other intelligent stuff. What you could do before we had chan_local was create a cross-link between two ports of the TE410P and then Dial out one port and in the other. This way you could control where the call was going.
 

doc/manager.txt

@@ -12,7 +12,7 @@ receive this class of "event".
 
 Command Syntax
 --------------
-Mangement communication consists of tags of the form "header: value", 
+Management communication consists of tags of the form "header: value", 
 terminated with an empty newline (\r\n) in the style of SMTP, HTTP, and
 other headers.
 

doc/model.txt

@@ -7,9 +7,9 @@ interface. Typically this is done in its own thread.  When a RING is
 detected, the backend should create a channel structure and then call
 ast_pbx_start() on that channel, which will create a thread to monitor
 that interface.  At this point, the PBX and/or applications it launches
-will manage the interface, and it need not be montored by the
+will manage the interface, and it need not be monitored by the
 aforementioned thread.  When the applications are finished, the requisite
 hangup function will be called, at which the channel can be considered to
-be no longer valid, and the thread that controls it will immenantly be
+be no longer valid, and the thread that controls it will imminently be
 terminated. 
 

doc/modules.txt

@@ -3,8 +3,8 @@ All modules must have at least the following functions:
 int load_module():
 
 	Do what you need to do when you get started.  This function
-returns 0 on sucess and non-zero on failure (it is not considered loaded
+returns 0 on success and non-zero on failure (it is not considered loaded
-if it failes.
+if it fails.
 
 int unload_module():
 	
@@ -12,7 +12,7 @@ int unload_module():
 features, you should give them a softhangup in an effort to keep the
 program from crashing.  Generally, unload_module is only called when the
 usecount is 0 or less, but the user can force unloading at their
-discression, and thus a module should do its best to comply (although in
+discretion, and thus a module should do its best to comply (although in
 some cases there may be no way to avoid a crash).  This function should
 return 0 on success and non-zero on failure (i.e. it cannot yet be
 unloaded).