configs: Move sample config files into a subdirectory of configs

This moves all samples configs from configs/ to configs/samples. This allows
for additional sets of sample configuration files to be added in the future.

Review: https://reviewboard.asterisk.org/r/3804/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3

configs/samples/console.conf.sample

@@ -0,0 +1,97 @@
+;
+; Configuration for chan_console, a cross-platform console channel driver.
+;
+
+[general]
+
+; Set this option to "yes" to enable automatically answering calls on the
+; console.  This is very useful if the console is used as an intercom.
+; The default value is "no".
+;
+;autoanswer = no
+
+; Set the default context to use for outgoing calls.  This can be overridden by
+; dialing some extension@context, unless the overridecontext option is enabled.
+; The default is "default".
+;
+;context = default
+
+; Set the default extension to use for outgoing calls.  The default is "s".
+;
+;extension = s
+
+; Set the default CallerID for created channels.
+;
+;callerid = MyName Here <(256) 428-6000>
+
+; Set the default language for created channels.
+;
+;language = en
+
+; If you set overridecontext to 'yes', then the whole dial string
+; will be interpreted as an extension, which is extremely useful
+; to dial SIP, IAX and other extensions which use the '@' character.
+; The default is "no".
+;
+;overridecontext = no    ; if 'no', the last @ will start the context
+                        ; if 'yes' the whole string is an extension.
+
+
+; Default Music on Hold class to use when this channel is placed on hold in
+; the case that the music class is not set on the channel with
+; Set(CHANNEL(musicclass)=whatever) in the dialplan and the peer channel
+; putting this one on hold did not suggest a class to use.
+;
+;mohinterpret=default
+
+;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
+; jbenable = yes              ; Enables the use of a jitterbuffer on the receiving side of an
+                              ; Console channel. Defaults to "no". An enabled jitterbuffer will
+                              ; be used only if the sending side can create and the receiving
+                              ; side can not accept jitter. The Console channel can't accept jitter,
+                              ; thus an enabled jitterbuffer on the receive Console side will always
+                              ; be used if the sending side can create jitter.
+
+; jbmaxsize = 200             ; Max length of the jitterbuffer in milliseconds.
+
+; jbresyncthreshold = 1000    ; Jump in the frame timestamps over which the jitterbuffer is
+                              ; resynchronized. Useful to improve the quality of the voice, with
+                              ; big jumps in/broken timestamps, usually sent from exotic devices
+                              ; and programs. Defaults to 1000.
+
+; jbimpl = fixed              ; Jitterbuffer implementation, used on the receiving side of a Console
+                              ; channel. Two implementations are currently available - "fixed"
+                              ; (with size always equals to jbmax-size) and "adaptive" (with
+                              ; variable size, actually the new jb of IAX2). Defaults to fixed.
+
+; jbtargetextra = 40          ; This option only affects the jb when 'jbimpl = adaptive' is set.
+                              ; The option represents the number of milliseconds by which the new
+                              ; jitter buffer will pad its size. the default is 40, so without
+                              ; modification, the new jitter buffer will set its size to the jitter
+                              ; value plus 40 milliseconds. increasing this value may help if your
+                              ; network normally has low jitter, but occasionally has spikes.
+
+; jblog = no                  ; Enables jitterbuffer frame logging. Defaults to "no".
+;-----------------------------------------------------------------------------------
+
+
+;
+; Any configuration context defined beyond the [general] section configures
+; specific devices for use.
+;
+
+[default]
+input_device = default       ; When configuring an input device and output device,
+output_device = default      ; use the name that you see when you run the "console
+                             ; list available" CLI command.  If you say "default", the
+                             ; system default input and output devices will be used.
+autoanswer = no
+context = default
+extension = s
+callerid = MyName Here <(256) 428-6000>
+language = en
+overridecontext = no
+mohinterpret = default
+active = yes                 ; This option should only be set for one console.
+                             ; It means that it is the active console to be
+                             ; used from the Asterisk CLI.