In chan_agent, while handling a channel indicate, the agent channel driver
must obtain a lock on both the agent channel, as well as the channel the
agent channel is using. To do so, it attempts to lock the other channel
first, then unlock the agent channel which is locked prior to entry into
the indicate handler. If this unlock fails with a negative return value,
which can occur if the object passed to agent_indicate is an invalid ao2
object or is NULL, the return value is passed directly to strerror, which
can only accept positive integer values.
In chan_dahdi, the return value of dahdi_get_index is used to directly
index into the sub-channel array. If dahd_get_index returns a negative
value, it would use that value to index into the array, which could cause
an invalid memory access. If dahdi_get_index returns a negative number,
we now default to SUB_REAL.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362204 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362205 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the MWI processing loop, when a valid event occurs the temporary caller ID
information is deallocated. If a new DAHDI channel is successfully created,
the event is passed up to the analog_ss_thread without error and the loop
exits. If, however, the DAHDI channel is not created, then the caller ID
struct has been free'd, and the gains reset to their previous level. This
will almost certainly cause an invalid access to the free'd memory, either
in subsequent calls to callerid_free or calls to callerid_feed.
* Rework the -r361705 patch to better manage the cs and mtd allocated
resources.
* Fixed use of mwimonitoractive flag to be correct if the mwi_thread()
fails to start.
........
Merged revisions 361854 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 361855 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361856 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the MWI processing loop, when a valid event occurs the temporary caller ID
information is deallocated. If a new DAHDI channel is successfully created,
the event is passed up to the analog_ss_thread without error and the loop
exits. If, however, the DAHDI channel is not created, then the caller ID
struct has been free'd, and the gains reset to their previous level. This
will almost certainly cause an invalid access to the free'd memory, either
in subsequent calls to callerid_free or calls to callerid_feed.
This patch makes it so that we only free the caller ID structure if a
DAHDI channel is successfully created, and we bump the gains back up
if we fail to make a DAHDI channel.
........
Merged revisions 361705 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 361706 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added new chan_dahdi.conf colp_send option parameter to block connected
line updates per span.
(closes issue ASTERISK-17025)
Reported by: Michael Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For analog lines, enables Asterisk to use dialtone detection per channel
if an incoming call was hung up before it was answered. If dialtone is
detected, the call is hung up.
no: Disabled. (Default)
yes: Look for dialtone for 10000 ms after answer.
<number>: Look for dialtone for the specified number of ms after answer.
always: Look for dialtone for the entire call. Dialtone may return
if the far end hangs up first.
dialtone_detect=yes
dialtone_detect=5000
dialtone_detect=always
(closes issue ASTERISK-19316)
Reported by: Jeremy Pepper
Patch by: Jeremy Pepper
Tested by: rmudgett,Jeremy Pepper
Review: https://reviewboard.asterisk.org/r/1737/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outgoing SS7 calls fail to detect incoming DTMF so any bridged channel
that requires out-of-band DTMF will not work.
* Added sig_ss7_open_media() calls at appropriate places in sig_ss7.c.
The new call converts conditionaled out unconverted code and shows that
the code really did something useful.
* Improved some chan_dahdi DTMF debug messages to help track DTMF
handling.
(closes issue ASTERISK-19312)
Reported by: Igor Nikolaev
........
Merged revisions 358260 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358261 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This changes the debuglevel of 'pri set debug' to a bit mask allowing the user
to independently select bits of output:
1 libpri internals including state machine
2 Decoded Q.931 messages
4 Decoded Q.921 headers
8 raw hex dump of the full frames
Additionally, this ensures that the meaning of "on" does not change and
intrudces intense and hex to simplify usage.
(closes issue ASTERISK-17159)
Original-patch-by: wimpy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature also causes the sending complete ie to be sent for switch
types that do not automatically send the ie. (EuroISDN/ETSI)
The main difference between dialing Dial(DAHDI/g0/1234w888) and
Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie.
(closes issue ASTERISK-19176)
Reported by: rmudgett
Tested by: rmudgett
........
Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Extracting sig_analog from chan_dahdi lost call progress detection
functionality.
* Fix analog ports from considering a call answered immediately after
dialing has completed if the callprogress option is enabled.
(closes issue ASTERISK-18841)
Reported by: Richard Miller
Patches:
chan_dahdi.diff (license #5685) patch uploaded by Richard Miller (Modified by me)
sig_analog.c.diff (license #5685) patch uploaded by Richard Miller (Modified by me)
sig_analog.h.diff (license #5685) patch uploaded by Richard Miller
........
Merged revisions 347006 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 347007 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix potential deadlocks in SIP and IAX blind transfer to parking.
* Fix SIP, IAX, DAHDI analog, and MGCP channel drivers to respect the
parkext_exclusive option with transfers (Park(,,,,,exclusive_lot)
parameter). Created ast_park_call_exten() and ast_masq_park_call_exten()
to maintian API compatibility.
* Made masq_park_call() handle a failed ast_channel_masquerade() setup.
* Reduced excessive struct parkeduser.peername[] size.
........
Merged revisions 341254 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 341255 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added a CLI "ss7 show channels" command that might prove useful for
future debugging.
* Made the incoming SS7 channel event check and gripe message uniform.
* Made sure that the DNID string for an incoming call is always
initialized.
(issue ASTERISK-17966)
Reported by: Kenneth Van Velthoven
Patches:
jira_asterisk_17966_v1.8_glare.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 340365 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 340366 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r338801 | rmudgett | 2011-09-30 17:06:48 -0500 (Fri, 30 Sep 2011) | 19 lines
Merged revisions 338800 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r338800 | rmudgett | 2011-09-30 17:05:10 -0500 (Fri, 30 Sep 2011) | 12 lines
Fix segfault in analog_ss_thread() not checking ast_read() for NULL.
NOTE: The problem was reported against v1.6.2. It is unlikely to ever
happen on v1.8 and above since chan_dahdi.c:analog_ss_thread() is unlikely
to be used. The version in sig_analog.c has largely replaced it.
(closes issue ASTERISK-18648)
Reported by: Stephan Bosch
Patches:
jira_asterisk_18648_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Stephan Bosch
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334013 | rmudgett | 2011-08-31 11:00:49 -0500 (Wed, 31 Aug 2011) | 30 lines
Merged revisions 334012 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334012 | rmudgett | 2011-08-31 10:57:12 -0500 (Wed, 31 Aug 2011) | 23 lines
No DAHDI channel available for conference, user introduction disabled.
The following error will consistently occur when trying to dial into a
MeetMe conference when the server does not have DAHDI hardware installed:
app_meetme.c: No DAHDI channel available for conference, user introduction
disabled (is chan_dahdi loaded?)
While chan_dahdi is loaded correctly during compilation and install of
Asterisk/Dahdi, including associated modules, etc., a chan_dahdi.conf
configuration file in /etc/asterisk is not created by FreePBX if hardware
does not exist, causing MeetMe to be unable to open a DAHDI pseudo
channel.
* Allow chan_dahdi to create a pseudo channel when there is no
chan_dahdi.conf file to load.
(closes issue ASTERISK-17398)
Reported by: Preston Edwards
Patches:
jira_asterisk_17398_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332504 | kmoore | 2011-08-18 14:29:15 -0500 (Thu, 18 Aug 2011) | 15 lines
Merged revisions 332503 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332503 | kmoore | 2011-08-18 14:28:00 -0500 (Thu, 18 Aug 2011) | 8 lines
CRC4 in "dahdi show status" gives wrong impression to T1 users
Change CRC4 to CRC in the output of "dahdi show status" so that it can apply in
more situations without confusing users, especially since T1 lines use CRC6
instead of CRC4.
(closes issue AST-471)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines
Merged revisions 332264 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines
Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
France Telecom brings layer 2 and layer 1 down on BRI lines when the line
is idle. When layer 1 goes down Asterisk cannot make outgoing calls and
the HA8 and HB8 cards also get IRQ misses.
The inability to make outgoing calls is because the line is in red alarm
and Asterisk will not make calls over a line it considers unavailable.
The IRQ misses for the HA8 and HB8 card are because the hardware is
switching clock sources from the line which just brought layer 1 down to
internal timing.
There is a DAHDI option for the B410P card to not tell Asterisk that layer
1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards:
"modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear
up the IRQ misses when the telco brings layer 1 down.
* Add layer 2 persistence option to customize the layer 2 behavior on BRI
PTMP lines. The new option has three settings: 1) Use libpri default
layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer
brings it down. 3) Leave layer 2 down when the peer brings it down.
Layer 2 will be brought up as needed for outgoing calls.
JIRA AST-598
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331956 | rmudgett | 2011-08-15 12:35:03 -0500 (Mon, 15 Aug 2011) | 20 lines
Merged revisions 331955 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331955 | rmudgett | 2011-08-15 12:24:08 -0500 (Mon, 15 Aug 2011) | 13 lines
Fix some minor chan_dahdi config load issues.
* Address chan_dahdi.conf dahdichan option todo item about needing line
number.
* Make ignore_failed_channels option also apply to dahdichan option.
* Don't attempt to create a default pseudo channel if the chan_dahdi.conf
channel/channels option is not allowed.
* Add a similar check for dahdichan in normal chan_dahdi.conf sections as
is done in users.conf.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331772 | rmudgett | 2011-08-12 13:59:45 -0500 (Fri, 12 Aug 2011) | 15 lines
Merged revisions 331771 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331771 | rmudgett | 2011-08-12 13:58:40 -0500 (Fri, 12 Aug 2011) | 8 lines
Suppress warning message when using DAHDITransfer or DAHDIHangup.
* The fake event should only be processed by the channel that currently
owns the private and not the associated call waiting or 3-way channel.
JIRA AST-620
JIRA SWP-3616
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331715 | rmudgett | 2011-08-12 12:54:47 -0500 (Fri, 12 Aug 2011) | 29 lines
Merged revisions 331714 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331714 | rmudgett | 2011-08-12 12:47:57 -0500 (Fri, 12 Aug 2011) | 22 lines
AMI actions DAHDIHangup and DAHDITransfer have no effect.
The AMI actions DAHDIHangup and DAHDITransfer have no effect on a DAHDI
channel. These two AMI actions are highly specialized to analog channels
and appear to make the channel behave like a jack port for headsets.
* Made the faked DAHDI event get processed before a normal media stream
read in dahdi_read() instead of trying to trigger an exception read by
setting the AST_FLAG_EXCEPTION flag. Apparently a change was made long
ago that changed how AST_FLAG_EXCEPTION is processed in the core.
Unfortunately, the faked DAHDI events no longer worked when that happened.
* Updated the DAHDI AMI action documentation for the following actions:
DAHDITransfer, DAHDIHangup, DAHDIDialOffhook, DAHDIDNDon, DAHDIDNDoff,
DAHDIShowChannels, and DAHDIRestart.
* Made use sscanf() instead of atoi() for better error checking of the
DAHDIChannel header string.
JIRA AST-620
JIRA SWP-3616
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330706 | kmoore | 2011-08-03 08:39:06 -0500 (Wed, 03 Aug 2011) | 17 lines
Merged revisions 330705 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r330705 | kmoore | 2011-08-03 08:38:17 -0500 (Wed, 03 Aug 2011) | 10 lines
Call pickup broken for DAHDI channels when beginning with #
The call pickup feature did not work on DAHDI devices for anything other than
feature codes beginning with * since all feature codes in chan_dahdi were
originally hard-coded to begin with *. This patch is also applied to
chan_dahdi.c to fix this bug with radio modes.
(closes issue AST-621)
Review: https://reviewboard.asterisk.org/r/1336/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325212 | rmudgett | 2011-06-28 12:30:16 -0500 (Tue, 28 Jun 2011) | 7 lines
Use the device name and not the channel name to initialize the device state.
Correct ASTERISK-11323 implementation as I don't see how it ever worked as
claimed when it used the channel name and not the device name.
(issue ASTERISK-11323)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG.
Add option to specify if and how much of the current time is put in
Q931_IE_TIME_DATE.
* Send date/time ie never.
* Send date/time ie date only.
* Send date/time ie date and hour.
* Send date/time ie date, hour, and minute.
* Send date/time ie date, hour, minute, and second.
* Send date/time ie default: Libpri will send date and hhmm only when in
NT PTMP mode to support ISDN phones.
(closes issue #19221)
Reported by: kenner
JIRA SWP-3396
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
