Without this patch, asterisk creates a temporary file before determining if the
specified command is valid. If invalid, we weren't properly cleaning up the file.
(closes issue #15730)
Reported by: zmehmood
Patches:
M15730.diff uploaded by junky (license 177)
Tested by: zmehmood
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@212763 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
situations.
What it does:
1. A new Flag value is defined in include/asterisk/channel.h,
AST_FLAG_BRIDGE_HANGUP_DONT, which used as a messenge to the
bridge hangup exten code not to run the h-exten there (nor
publish the bridge cdr there). It will done at the pbx-loop
level instead.
2. In the manager Redirect code, I set this flag on the channel
if the channel has a non-null pbx pointer. I did the same for the
second (chan2) channel, which gets run if name2 is set...
and the first succeeds.
3. I restored the ending of the cdr for the pbx loop h-exten
running code. Don't know why it was removed in the first place.
4. The first attempt at the fix for this bug was to place code
directly in the async_goto routine, which was called from a
large number of places, and could affect a large number of
cases, so I tested that fix against a fair number of transfer
scenarios, both with and without the patch. In the process,
I saw that putting the fix in async_goto seemed not to affect
any of the blind or attended scenarios, but still, I was
was highly concerned that some other scenarios I had not tested
might be negatively impacted, so I refined the patch to
its current scope, and jmls tested both. In the process, tho,
I saw that blind xfers in one situation, when the one-touch
blind-xfer feature is used by the peer, we got strange
h-exten behavior. So, I inserted code to swap CDRs and
to set the HANGUP_DONT field, to get uniform behavior.
5. I added code to the bridge to obey the HANGUP_DONT flag,
skipping both publishing the bridge CDR, and running
the h-exten; they will be done at the pbx-loop (higher)
level instead.
6. I removed all the debug logs from the patch before committing.
7. I moved the AUTOLOOP set/reset in the h-exten code in res_features
so it's only done if the h-exten is going to be run. A very
minor performance improvement, but technically correct.
(closes issue #14241)
Reported by: jmls
Patches:
14241_redirect_no_bridgeCDR_or_h_exten_via_transfer uploaded by murf (license 17)
Tested by: murf, jmls
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@172030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"module unload" was already identified as a command that can not be used
from the AMI. "restart gracefully" effectively unloads all modules, and will
run in to the same problems.
(closes issue #13894)
Reported by: kernelsensei
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We'll create a bogus channel for the function call and destroy it when we're done. If we have trouble allocating the bogus channel then we're not going to try executing the function call at all and run the risk of crashing.
(closes issue #13715)
reported by: makoto
patch by: bweschke
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@150816 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I was mistakenly under the assumption that dialplan functions
*always* required that a channel be present. I need to go
home earlier, I think :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@150304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the manager's GetVar handler if an invalid channel has
been specified. Several dialplan functions, including
CHANNEL and SIP_HEADER, do not check for NULL-ness of
the channel being passed in.
(closes issue #13715)
Reported by: makoto
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@150298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@140488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
though they are allowed to connect.
(closes issue #12594)
Reported by: bkruse
Patches:
12594-managerusers-2.diff uploaded by qwell (license 4)
Tested by: bkruse
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@120061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
mansession_id cookie is coded to be limited to 8 characters of hex, and this
could break logins from 64-bit machines in some cases.
(inspired by AST-20)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@114591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
could be appended during a brief time when the manager is not waiting for input.
If an event comes during this period, we need to set an indicator that there is an
event pending so that the manager doesn't attempt to wait forever for an event that
already happened.
(closes issue #12354)
Reported by: bamby
Patches:
manager_race_condition.diff uploaded by bamby (license 430)
(comments added by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@112468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now, it automatically increases the reference count to reflect the reference
that is now held by the container.
This was done to be more consistent with ao2_unlink(), which automatically
releases the reference held by the container. It also makes it so it is
no longer possible for a pointer to be invalid after ao2_link() returns.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@90348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
invalid, due to the repetition of certain parameters in a single event.
This caused various issues for XML parsers, some of which refused to parse
at all, given the invalidity of the rendered XML. So this commit fixes
the XML output, ensuring that each entity parameter has a unique name, thus
ensuring valid XML.
Reported by: msetim
Patch by: tilghman
(Closes issue #10220)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@89536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
