bridge_p2p_rtp_write will forward rtp to the bridged rtp instance
without modifying the ssrc. However, it is not updating the SSRC
in the bridged rtp. Thus, when SSRC packets are generated, they
have the correct SSRC for the sender.
ASTERISK-28773 #close
Change-Id: I39f923bde28ebb4f0fddc926b92494aed294a478
If ICE support is enabled but not negotiated, the rtp->ice structure is
not being destroyed. This leads to Asterisk waiting for ICE to complete
instead of immediately starting the DTLS handshake, resulting in the
call leg having no RTP.
ASTERISK-28769 #close
Change-Id: I17c137546dc9ecfb9583c24dcf4c2ced8bbd7a27
This change introduce a CLI command for the RTP to display the general
configuration.
In the first step add the follow fields of the configurations:
- rtpstart
- rtpend
- dtmftimeout
- rtpchecksum
- strictrtp
- learning_min_sequential
- icesupport
Change-Id: Ibe5450898e2c3e1ed68c10993aa1ac6bf09b821f
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
The receive buffer will now grow if we end up flushing the
receive queue after not receiving the expected packet in time.
This is done in hopes that if this is encountered again the
extra buffer size will allow more time to pass and any missing
packets to be received.
The send buffer will now grow if we are asked for packets and
can't find them. This is done in hopes that the packets are
from the past and have simply been expired. If so then in
the future with the extra buffer space the packets should be
available.
Sequence number cycling has been handled so that the
correct sequence number is calculated and used in
various places, including for sorting packets and
for determining if a packet is old or not.
NACK sending is now more aggressive. If a substantial number
of missing sequence numbers are added a NACK will be sent
immediately. Afterwards once the receive buffer reaches 25%
a single NACK is sent. If the buffer continues to grow and
reaches 50% or greater a NACK will be sent for each received
future packet to aggressively ask the remote endpoint to
retransmit.
ASTERISK-28764
Change-Id: I97633dfa8a09a7889cef815b2be369f3f0314b41
When a text message was received any associated variable was not written to
the ARI TextMessageReceived event. This occurred because Asterisk only wrote
out "send" variables. However, even those "send" variables would fail ARI
validation due to a TextMessageVariable formatting bug.
Since it seems the TextMessageReceived event has never been able to include
actual variables it was decided to remove the TextMessageVariable object type
from ARI, and simply return a JSON object of key/value pairs for variables.
This aligns more with how the ARI sendMessage handles variables, and other
places in ARI.
ASTERISK-28755 #close
Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f
Update the state of remote_hold immediately on receipt of remote
SDP so that the information is available when building the SDP
answer
ASTERISK-28754 #close
Change-Id: I7026032a807e9c95081cb8f060400b05deb4836f
This change extends the Sorcery API to allow a wizard to be
told to explicitly reload objects or a specific object type
even if the wizard believes that nothing has changed.
This has been leveraged by res_pjsip and res_pjsip_acl to
reload endpoints and PJSIP ACLs when a named ACL changes.
ASTERISK-28697
Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b
In order to retry outbound registrations for some situations, we
need access to the tdata from the original request. For instance,
for 401/407 responses we need it to properly construct the
subsequent request with the authentication. We also need it if
we're iterating over a DNS SRV response record set so we can skip
entries we've already tried.
We've been getting the tdata from the server response rdata and
transaction but that only works for the failures where there was
actually a response (4XX, 5XX, etc). For timeouts there's no
response and therefore no rdata or transaction from which to get
the tdata. When processing a single A/AAAA record for a server,
this wasn't an issue as we just retried that same server after the
retry timer expired. If we got an SRV record set for the server
though, without the state from the tdata, we just kept trying the
first entry in the set repeatedly instead of skipping to the next
one in the list.
* Added a "last_tdata" member to the client state structure to keep
track of the sent tdata.
* Updated registration_client_send() to save the tdata it used into
the client_state.
* Updated sip_outbound_registration_response_cb() to use the tdata
saved in client_state when we don't get a response from the
server. We still use the tdata from the transaction when we DO
get a response from the server so we can properly handle 4XX
responses where our new request depends on it.
General note on timeouts:
Although res_pjsip_outbound_registration skips to the next record
immediately when a timeout occurs during SRV set traversal, it's
pjproject that determines how long to wait before a timeout is
declared. As with other SIP message types, pjproject will continue
trying the same server at an interval specified by "timer_t1" until
"timer_b" expires. Both of those timers are set in the pjsip.conf
"system" section.
ASTERISK-28746
Change-Id: I199b8274392d17661dd3ce3b4d69a3968368fa06
This change adds support to bridge_softmix to allow the addition
and removal of additional video source streams. When such a change
occurs each participant is renegotiated as needed to reflect the
update. If another video source is added then each participant
gets another source. If a video source is removed then it is
removed from each participant. This functionality allows you to
have both your webcam and screenshare providing video if you
desire, or even more streams. Mapping has been changed to use
the topology index on the source channel as a unique identifier
for outgoing participant streams, this will never change and
provides an easy way to establish the mapping.
The bridge_simple and bridge_native_rtp modules have also been
updated to renegotiate when the stream topology of a party changes
allowing the same behavior to occur as added to bridge_softmix.
If a screen share is added then the opposite party is renegotiated.
If that screen share is removed then the opposite party is
renegotiated again.
Some additional fixes are also included in here. Stream state is
now conveyed in SDP so sendonly/recvonly/inactive streams can
be requested. Removed streams now also remove previous state
from themselves so consumers don't get confused.
ASTERISK-28733
Change-Id: I93f41fb41b85646bef71408111c17ccea30cb0c5
When handling ICE negotiations, it's possible that there can be a delay
between STUN binding requests which in turn will cause a delay in ICE
completion, preventing media from flowing. It should be possible to send
media when there is at least one valid pair, preventing this scenario
from occurring.
A change was added to PJPROJECT that adds an optional callback
(on_valid_pair) that will be called when the first valid pair is found
during ICE negotiation. Asterisk uses this to start the DTLS handshake,
allowing media to flow. It will only be called once, either on the first
valid pair, or when ICE negotiation is complete.
ASTERISK-28716
Change-Id: Ia7b68c34f06d2a1d91c5ed51627b66fd0363d867
When moh_passthrough is used, asterisk is only generating invites
of type sendonly and sendrecv instead of taking fully into account
the on hold state of the local and remote parties
ASTERISK-28738 #close
Change-Id: Iaaad9fbc033cb14803d433b8a4071bc337047761
There was a race condition between client initiated DTLS setup, and handling
of server side ice completion that caused the underlying SSL object to get
cleared during DTLS initialization. If this happened Asterisk would be left
in a partial DTLS setup state. RTP packets were sent and received, but were
not being encrypted and decrypted. This resulted in no audio, or static.
Specifically, this occurred when '__rtp_recvfrom' was processing the handshake
sequence from the client to the server, and then 'ast_rtp_on_ice_complete'
gets called from another thread and clears the SSL object when calling the
'dtls_perform_setup' function. The timing had to be just right in the sense
that from the external SSL library perspective SSL initialization completed
(rtp recv), Asterisk clears/resets the SSL object (ice done), and then checks
to see if SSL is intialized (rtp recv). Since it was cleared, Asterisk thinks
it is not finished, thus not completing 'dtls_srtp_setup'.
This patch removes calls to 'dtls_perform_setup', which clears the SSL object,
in 'ast_rtp_on_ice_complete'. When ice completes, there is no reason to clear
the underlying SSL object. If an ice candidate changes a full protocol level
renegotiation occurs. Also, in the case of bundled ICE candidates are reused
when a stream is added. So no real reason to have to clear, and reset in this
instance.
Also, this patch adds a bit of extra logging to aid in diagnosis of any future
problems.
ASTERISK-28742 #close
Change-Id: I34c9e6bad5a39b087164646e2836e3e48fe6892f
The change to res_config_odbc that allowed empty strings to be
returned to realtime consumers¹ causes a warning to be emitted when
loading MoH classes. So we need to treat an empty 'format' as if it
was not specified to avoid the warning.
ASTERISK-28735 #close
Reported by: Ross Beer
[1] https://gerrit.asterisk.org/c/asterisk/+/13722
Change-Id: I9a271d721e1a0973e80ebe7d75b46a0d8fa0e5a5
Given a scenario where session refreshes occur close to
each other while another is finishing it was possible for
the session refreshes to occur out of order. It was
also possible for session refreshes to be delayed for
quite some time if a session refresh did not result in
a topology change.
For the out of order session refreshes the first session
refresh would be queued due to a transaction in progress.
This transaction would then finish. When finished a
separate task to process the delayed requests queue
would be queued for handling. A second refresh would
be requested internally before this delayed request
queued task was processed. As no transaction was in
progress this session refresh would be immediately
handled before the queued session refresh.
The code will now check if any delayed requests exist
before allowing a session refresh to immediately occur.
If any exist then the session refresh is queued.
For the delayed session refreshes if a session refresh
did not result in a topology change the attempt would
be immediately stopped and no other delayed requests would
be processed.
The code will now go through the entire delayed requests
queue until a delayed request results in a request
actually being sent.
ASTERISK-28730
Change-Id: Ied640280133871f77d3f332be62265e754605088
The code assumed that when the transport-cc feedback
function was called at least one packet will have been
received. In practice this isn't always true, so now
we just reschedule the sending and do nothing.
Change-Id: Iabe7b358704da446fc3b0596b847bff8b8a0da6a
When res_config_odbc (and perhaps other realtime backends) reads a SQL
NULL from the database, it coalesces the value to the empty string
which prevents it from being returned to the realtime core.
However, if it instead reads the empty string from the database, it
needs a way to encode that fact without having the value omitted
entirely. It does this by changing the value to a string with a single
space. The realtime code in main/config.c recognizes this special case
and _turns the string back into the empty string_ before passing it to
realtime API consumers.
For all of this to work, we need to ensure that we actually pass the
single-space-string back to the realtime core, which is currently
failing because we are trimming the value before checking its
content. So instead we now special case the single-space-string case
so that empty values are returned properly.
ASTERISK-28719 #close
Reported by: EDV O-TON
Change-Id: I673ed8c31ad037aa224e80c78c7a1dc4e4a4e3de
Incrementing stasis_app_playback.media_index directly in our playback
loop means that when we reach the end of our playlist the index into
the vector will be outside of the bounds of the vector.
Instead use a temporary variable and only assign when we're sure that
we are in bounds.
ASTERISK-28713 #close
Reported by: Sébastien Duthil
Change-Id: Ib53f7f156097e0607eb5871d9d78d246ed274928
Each subscription needs to have a reference to the persisted data
for it, as well as the main JSON contained within the tree. When
recreating a subscription this did not occur and they both shared
the same reference.
ASTERISK-28714
Change-Id: I706abd49ea182ea367a4ac3feca2706460ae9f4a
Calling 'app_send' eventually calls the app's message handler. It's possible
for a handler to obtain a lock on another object, and then need/want to lock
the app object. If the caller of 'app_send' locks the app object prior to
calling then there's a potential for a deadlock, if another thread calls
'app_send' without locking.
This patch makes it so 'app_send' is not called with the app object locked in
the section of code doing such.
ASTERISK-28423 #close
Change-Id: I6767c6d0933c7db1b984018966eefca4c0638a27
The cleanup code in stasis shuts down applications if they are in a deactivated
state, and no longer have explicit subscriptions. When registering an app the
cleanup code was running before calling 'update'. When it should be executed
after 'update' since a call to register may re-activate the app. We don't want
it to shutdown before the 'update' otherwise the app won't be re-activated,
or registered.
This patch makes it so the cleanup code is executed post 'update'.
ASTERISK-28679 #close
Change-Id: I8f2c0b17e33bb8128441567b97fd4c7bf74a327b
We need to wait for the message sending callback to finish to know if
we succeeded or failed.
ASTERISK-25421 #close
Reported by: Dmitriy Serov
Change-Id: I22b954398821d2caf4c6fe58f0607c8cfa378059
The change in 9b99ef50b5 updated the
syntax of the 'realtime update2' CLI command but did not correctly
update the calls to ast_update2_realtime().
The issue this addresses was originally opened because we aren't
allowing a SQL NULL to be set as part of the update, but this is a
limitation of the Realtime API and is not a bug.
Additionally, this patch:
* Corrects the example in the command documentation to reflect
'update2' instead of 'update.'
* Fixes the leading spacing of the command documentation.
* Checks that the required 'NULL' literal argument is present where we
expect it to be.
ASTERISK-21794 #close
Reported by: Cédric Bassaget
Change-Id: Idda63a5dc50d5f9bcb34c27ea3238d90f733b2cd
This commit adds support for
[AudioSocket](
https://wiki.asterisk.org/wiki/display/AST/AudioSocket),
a very simple bidirectional audio streaming protocol. There are both
channel and application interfaces.
A description of the protocol can be found on the above referenced
GitHub page. A short talk about the reasons and implementation can be
found on [YouTube](https://www.youtube.com/watch?v=tjduXbZZEgI), from
CommCon 2019.
ARI support has also been added via the existing "externalMedia" ARI
functionality. The UUID is specified using the arbitrary "data" field.
ASTERISK-28484 #close
Change-Id: Ie866e6c4fa13178ec76f2a6971ad3590a3a588b5
