Changes made to apps/Makefile to optionally build all three app_voicemail
variations at the same time: 1) file (default), 2) odbc, and 3) imap.
This functionality was requested by users. modules.conf.sample warns the
user to make sure only one voicemail is loaded at a time.
Change-Id: Iba3cd8ffb4b7e8b1c64a11dd383e1eafcd3ed0e7
Where possble, hostname and port has been added to error
messages, mostly on the server side.
ASTERISK-26006
Reported by: Oleksandr Natalenko
Change-Id: Iff4f897277bc36ce8c5b493b71d0a4a7b74e62f0
Most SSL/TLS error messages coming from pjproject now have either
the peer address:port or peer hostname, depending on what was
available at the time and code location where the error was
generated.
ASTERISK-28444
Reported by: Bernhard Schmidt
Change-Id: I41770e8a1ea5e96f6e16b236692c4269ce1ba91e
Currently, DELETE /ari/channels/<channelID> supports only few hangup reasons.
It's good enough for simple use, but when it needs to set the detail reason,
it comes challenges.
Added reason_code query parameter for that.
ASTERISK-28385
Change-Id: I1cf1d991ffd759d0591b347445a55f416ddc3ff2
Previously, when a Transfer (REFER) was performed, chan_pjsip would set
the TRANSFERSTATUS to SUCCESS when the REFER was queued up. This did not
reflect a successful/unsuccessful transfer the way chan_sip did.
Added a callback module to process the refer subscription information.
Now depends on res_pjsip_pubsub so call transfer progress can be monitored
and reported
ASTERISK-26968 #close
Reported-by: Dan Cropp
Change-Id: If6c27c757c66f71e8b75e3fe49da53ebe62395dc
Now AMD algorithm will not ignore AST_FRAME_NULL, As I think using manual
wait time instead of `framelength` is enough to fix timeout / TOOLONG issue.
ASTERISK-28419 #close
Change-Id: I16ea2d6295bc99b975e8c092e5f9fbd9214debdb
According T.38 Gateway 'Use case 3'
https://wiki.asterisk.org/wiki/display/AST/T.38+Gateway
T.38 Gateway should send T.38 negotiation request to called endpoint
if FAX preamble (using V.21 detector) generated by called endpoint.
But it does not, because fax_gateway_detect_v21 constructs T.38
negotiation request, but forwards it only to other channel,
not to the channel on which FAX preamble is detected.
Some SIP endpoints could be improperly configured to rely on the other side
to initiate T.38 re-INVITEs.
With this patch the T.38 Gateway tries to negotiate with both sides
by sending T.38 negotiation request to both endpoints supported T.38.
Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
We were using the presence of /usr/lib64 to determine where
shared libraries should be installed. This only existed on
Redhat based systems and was safe. If it existed, use it,
otherwise use /usr/lib.
Unfortunately, Ubuntu 19 decided to create a /usr/lib64 BUT
NOT INCLUDE IT IN THE DEFAULT ld.so.conf. So if anything is
installed there, it won't work.
The new method, just looks for $ID in /etc/os-release and if it's
centos or fedora, uses /usr/lib64 and if ubuntu, uses /usr/lib.
NOTE: This applies only to the CI scripts. Normal asterisk
build and install is not affected.
Change-Id: Iad66374b550fd89349bedbbf2b93f8edd195a7c3
There is WARNING "no samples for ..." on each Playtones.
The function ast_playtones_start calls ast_activate_generator,
which calls ast_prod.
The function ast_prod calls ast_write with empty audio frame.
In this case it's spam log.
Change-Id: Id4ac309489d9ff281bad02abdef341cecdede660
Fixed format-truncation issues in chan_dahdi.c and
sig_analog.c. Since they're related to fields provided
by dahdi-tools we can't change the buffer sizes so we're just
checking the return from snprintf and printing an errior if we
overflow.
Change-Id: Idc1f3c1565b88a7d145332a0196074b5832864e5
When a channel already in a conference bridge is attended transfered
to another extension, or when an existing call is attended
transferred into a conference bridge, we now generate ConfbridgeJoin
and ConfbridgeLeave events for the entering and departing channels.
Change-Id: Id7709cfbceb26fbcb828b2d0d2a6b2fbeaf028e1
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
AttendedTransfer queues up attended transfer to the given extension.
This application can be useful with Custom Dynamic Features.
For example to make attended transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_atxfer => *7,self,GoSub,"my_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_atxfer
TRANSFER_CONTEXT=my_transfer
[my_atxfer]
exten => s,1,AttendedTransfer(1234567890)
same => n,Return()
[my_transfer]
include => default
;;;
This application also can be used to completly redefine Attended transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
atxfer => *7
[applicationmap]
custom_atxfer => *2,self,GoSub,"custom_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_atxfer
TRANSFER_CONTEXT=my_transfer
[custom_atxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,AttendedTransfer(${dest})
same => n,Return()
[my_transfer]
include => default
;;;
Change-Id: Ie5cfa455d0813cffd5c85a6fb117f07d8f0b903b
We have seen some rare case of segmentation fault in hangup function
and we could notice that channel pointer was NULL. Debug log shows
that there is a 200 OK answer and SIP timeout at the same time. It
looks that while the SIP session was being destroyed due to timeout
call hangup due to answer event lead to race condition and channel
is being destroyed from two different places. The check ensures we
check it not to be NULL before freeing it.
ASTERISK-25371
Change-Id: I19f6566830640625e08f7b87bfe15758ad33a778
BlindTransfer redirects all channels currently bridged to the
caller channel to the specified destination.
This application can be useful with Custom Dynamic Features.
For example to make blind transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_blindxfer
[my_blindxfer]
exten => s,1,BlindTransfer(1234567890,default)
same => n,Return()
;;;
This application also can be used to completly redefine Blind transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
blindxfer =>
[applicationmap]
custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_blindxfer
[custom_blindxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,BlindTransfer(${dest},default)
same => n,Return()
;;;
Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a
Fixes an error occurring in function pgsql_reconnect() caused when value of
hostname is blank. Which in turn will cause the connection string to look
like this: "host= port=xx", which creates a sintax error. This fix now checks
if the corresponding values for host, port, dbname, and user are blank. Note
that since this is a reconnect function the database library will replace any
missing value pairs with default ones.
ASTERISK-28435
Change-Id: I0a921f99bbd265768be08cd492f04b30855b8423
The change #10017 "Handle fax gateway being started more than once"
introdiced a bug which leads to segfault in res_fax_spandsp.
The res_fax_spandsp module does not support reserving sessions, so
fax_session_reserve returns a fax session with state AST_FAX_STATE_INACTIVE.
The fax_gateway_start does not create a real fax session if the fax session
is already present and the state is not AST_FAX_STATE_RESERVED.
But the "reserved" session created for res_fax_spandsp has state
AST_FAX_STATE_INACTIVE, so fax_gateway_start not starting.
Then when fax_gateway_framehook is called and gateway T.38 state is
NEGOTIATED the call of gateway->s->tech->write(gateway->s, f) leads to
segfault, because session tech_pvt is not set, i.e. the tech session
was not initialized/started.
This patch adds check also on AST_FAX_STATE_INACTIVE to the "reserved"
session created for res_fax_spandsp will start.
This patch also adds extra check and log ERROR if tech_pvt is not set
before call tech->write.
ASTERISK-27981 #close
Change-Id: Ife3e65e5f18c902db2ff0538fccf7d28f88fa803
This patch adds a channel name to output of CLI 'fax show session'
and also expands the channel name field up to 30 characters on
CLI 'fax show sessions'
Change-Id: Id059c43ff41811f5e76712b83fb63b8f246da953
One of the change files doesn't conform to the format that the release
scripts need in order to parse it.
Change-Id: Ie0b634cf27e4cbc671b9fe92993b6f2ecf60254c
After some definitions have been moved to asterisk/mwi.h the files
channels/chan_dahdi.h channels/sig_pri.c are missing this new
include.
ASTERISK-28427 #close
Change-Id: Ia8cc595eeda653324643f40dcd9799d4c3f0ac91
This patch adds the 'p' option.
The extension entered will be considered complete when a # is entered.
Change-Id: If77c40c9c8b525885730821e768f5dea71cf04c1
When monitoring Asterisk instances, it's often useful to know when an
outbound registration fails, as this often maps to the notion of a trunk
and having a trunk fail is usually a "bad thing". As such, this patch
adds monitoring metrics that track the state of PJSIP outbound registrations.
It does this by looking for the Registry events coming across the Stasis
system topic, and publishing those as metrics to Prometheus. Note that
while this may support other outbound registration types (IAX2, SIP, etc.)
those haven't been tested. Your mileage may vary.
(And why are you still using IAX2 and SIP? It's 2019 folks. Get with the
program.)
This patch also adds Sorcery observers to handle modifications to the
underlying PJSIP outbound registration objects. This is useful when a
reload is triggered that modifies the properties of an outbound registration,
or when ARI push configuration is used and an object is updated or
deleted. Because we rely on properties of the registration object to
define the metric (label key/value pairs), we delete the relevant metric when
we notice that something has changed and wait for a new Stasis message to
arrive to re-create the metric.
ASTERISK-28403
Change-Id: If01420e38530fc20b6dd4aa15cd281d94cd2b87e
This patch adds a few CLI commands to the res_prometheus module to aid
system administrators setting up and configuring the module. This includes:
* prometheus show status: Display basic statistics about the Prometheus
module, including its essential configuration, when it was last scraped,
and how long the scrape took. The last two bits of information are useful
when Prometheus isn't generating metrics appropriately, as it will at
least tell you if Asterisk has had its HTTP route hit by the remote
server.
* prometheus show metrics: Dump the current metrics to the CLI. Useful for
system administrators to see what metrics are currently available without
having to cURL or go to Prometheus itself.
ASTERISK-28403
Change-Id: Ic09813e5e14b901571c5c96ebeae2a02566c5172
This patch adds basic Asterisk bridge statistics to the res_prometheus
module. This includes:
* asterisk_bridges_count: The current number of bridges active on the
system.
* asterisk_bridges_channels_count: The number of channels active in a
bridge.
In all cases, enough information is provided with each bridge metric
to determine a unique instance of Asterisk that provided the data, along
with the technology, subclass, and creator of the bridge.
ASTERISK-28403
Change-Id: Ie27417dd72c5bc7624eb2a7a6a8829d7551788dc
This patch adds basic Asterisk endpoint statistics to the res_prometheus
module. This includes:
* asterisk_endpoints_state: The current state (unknown, online, offline)
for each defined endpoint.
* asterisk_endpoints_channels_count: The current number of channels
associated with a given endpoint.
* asterisk_endpoints_count: The current number of defined endpoints.
In all cases, enough information is provided with each endpoint metric
to determine a unique instance of Asterisk that provided the data, as well
as the underlying technology and resource definition.
ASTERISK-28403
Change-Id: I46443963330c206a7d12722d08dcaabef672310e
Using timestamp with signed int will cause timestamps exceeding max value
to be negative.
This causes the jitterbuffer to do passthrough of the packet.
ASTERISK-28421
Change-Id: I9dabd0718180f2978856c50f43aac4e52dc3cde9
This patch adds basic Asterisk channel statistics to the res_prometheus
module. This includes:
* asterisk_calls_sum: A running sum of the total number of
processed calls
* asterisk_calls_count: The current number of calls
* asterisk_channels_count: The current number of channels
* asterisk_channels_state: The state of any particular channel
* asterisk_channels_duration_seconds: How long a channel has existed,
in seconds
In all cases, enough information is provided with each channel metric
to determine a unique instance of Asterisk that provided the data, as
well as the name, type, unique ID, and - if present - linked ID of each
channel.
ASTERISK-28403
Change-Id: I0db306ec94205d4f58d1e7fbabfe04b185869f59
This patch fixes three compatibility issues for Darwin compatible builds:
(1) Use BSD compatible command line option for sed
For some versions of BSD sed, the -r command line option is unknown.
Both GNU and BSD sed support the -E command line option for enabling
extended regular expressions; as such, this patch replaces the -r
option with -E.
(2) Look for '_' in pjproject generated symbols
In Darwin comaptible systems, the symbols generated for pjproject may be
prefixed with an '_'. When exporting these to a symbol file, the invocation
to sed has to optionally look for a prefix of said '_' character.
(3) Use -all_load/-noall_load when linking
The flags -whole-archive/-no-whole-archive are not supported by the
linker, and must instead be replaced with -all_load/-noall_load.
Change-Id: I58121756de6a0560a6e49ca9d6bf9566a333cde3
