When an answer SDP is invalid we were disconnecting the outgoing call and
sending two BYE requests. The first BYE was sent by PJPROJECT because of
the invalid SDP answer. The second BYE was sent by Asterisk because it
thought the canceled call was the result of the RFC5407 section 3.1.2 race
condition.
* Made not send the BYE on a canceled session if the SDP negotiation is
incomplete because PJPROJECT has already sent a BYE for the failed
negotiation.
ASTERISK-25772 #close
Reported by: Dmitriy Serov
Change-Id: I44ad0bd0605e8eeb7035c890d6f97a1331f1a836
When an incoming call defers SDP negotiation and then sends us an invalid
SDP in the ACK, we need to send a BYE to disconnect the call. In this
case SDP negotiation has failed and we don't have valid media streams
negotiated.
ASTERISK-25772
Change-Id: Ia358516b0fc1e6c4c139b78246f10b9da7a2dfb8
Registering the PJMEDIA error codes allows errors found when parsing an
incoming SDP to be easier to figure out.
"Missing SDP rtpmap for dynamic payload type (PJMEDIA_SDP_EMISSINGRTPMAP)"
is much easier to understand than "Unknown error 220030".
ASTERISK-25772
Change-Id: I44b2dcea656fedd7593171be9e845880a2c70ca0
pjsip_inv_end_session() is documented as being able to return the
passed in tdata parameter set to NULL on success.
Change-Id: I09d53725c49b7183c41bfa1be3ff225f3a8d3047
This change removes hardcoded SDP parsing and generation for
Siren7 and Siren14 from chan_sip and moves it to format attribute
modules so it can also be used by chan_pjsip.
With this the fmtp lines for both are added with the bitrate
information.
ASTERISK-26021
Change-Id: Ibb004eda37a14c0a35ef0613f6237977fc800037
fax_v21_session_new created a session details object but only released
the allocation reference during error conditions. fax_session_new adds
it's own reference to details if needed so the caller is always
responsible for cleaning it's own reference.
ASTERISK-26141 #close
Change-Id: Ie7fc52a83b6596ce9ce2d5a2bd9f3e204f48fc88
The patch removes updating all Endpoints' status on startup.
Instead, only non-qualified aors with static contact
and non-qualified non-expired contacts are retrieved from the realtime to
update the endpoint status to ONLINE.
The endpoint name was added to the contact object to simply find the endpoint
that created this contact.
The status of endpoints with qualified aors will be updated by 'qualify'
functions.
ASTERISK-26061 #close
Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df
gcc 6 caught a previously unidentified self-comparison in
ice_candidate_cmp. Fixed it and re-ordered the predicates for better
short-circuiting.
ASTERISK-26140 #close
Change-Id: I3da713c568e24064430257b3502fbdafd35af7a7
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
In addition, the head of the alembic branch referred to a non-existent
revision. This has been fixed by referring to the proper revision.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch introduces a new boolean type that
translates to "yes" or "no" instead.
ASTERISK-26128 #close
Change-Id: I51574736a881189de695a824883a18d66a52dcef
Occasionally under load we'll attempt to send a final NOTIFY on a
subscription that's already been terminated and a SEGV will occur
down in pjproject's evsub_destroy function. This is a result of a
race condition between all the paths that can generate a notify
and/or destroy the underlying pjproject evsub object:
* The client can send a SUBSCRIBE with Expires: 0.
* The client can send a SUBSCRIBE/refresh.
* The subscription timer can expire.
* An extension state can change.
* An MWI event can be generated.
* The pjproject transaction timer (timer_b) can expire.
Normally when our pubsub_on_evsub_state is called with a terminate,
we push a task to the serializer and return at which point the dialog
is unlocked. This is usually not a problem because the task runs
immediately and locks the dialog again. When the system is heavily
loaded though, there may be a delay between the unlock and relock
during which another event may occur such as the subscription timer
or timer_b expiring, an extension state change, etc. These may also
cause a terminate to be processed and if so, we could cause pjproject
to try to destroy the evsub structure twice. There's no way for us to
tell that the evsub was already destroyed and the evsub's group lock
can't tolerate this and SEGVs.
The remedy is twofold.
* A patch has been submitted to Teluu and added to the bundled
pjproject which adds add/decrement operations on evsub's group lock.
* In res_pjsip_pubsub:
* configure.ac and pjproject-bundled's configure.m4 were updated
to check for the new evsub group lock APIs.
* We now add a reference to the evsub group lock when we create
the subscription and remove the reference when we clean up the
subscription. This prevents evsub from being destroyed before
we're done with it.
* A state has been added to the subscription tree structure so
termination progress can be tracked through the asyncronous tasks.
* The pubsub_on_evsub_state callback has been split so it's not doing
double duty. It now only handles the final cleanup of the
subscription tree. pubsub_on_rx_refresh now handles both client
refreshes and client terminates. It was always being called for
both anyway.
* The serialized_on_server_timeout task was removed since
serialized_pubsub_on_rx_refresh was almost identical.
* Missing state checks and ao2_cleanups were added.
* Some debug levels were adjusted to make seeing only off-nominal
things at level 1 and nominal or progress things at level 2+.
ASTERISK-26099 #close
Reported-by: Ross Beer.
Change-Id: I779d11802cf672a51392e62a74a1216596075ba1
Do not use DTLSv1_method() but DTLS_method() when available in OpenSSL of the
underlying platform. This change enables DTLS 1.2 since OpenSSL 1.0.2, for
WebRTC (DTLS-SRTP via SIP-over-WebSockets). This change enables AEAD-based
cipher-suites.
ASTERISK-26130 #close
Change-Id: I41f24448d6d2953e8bdb97c9f4a6bc8a8f055fd0
The receipt of a SIP MESSAGE may occur over any transport including TCP
and TLS. When the message is received, the original URI is added to the
message in the field PJSIP_RECVADDR, but this is insufficient to ensure
a reply message can reach the originating endpoint. This patch adds the
PJSIP_TRANSPORT field populated with the transport type.
ASTERISK-26132 #close
Change-Id: I28c4b1e40d573a056c81deb213ecf53e968f725e
When shutting down res_pjsip_session will get unloaded before res_pjsip.
The act of unloading unregisters all the PJSIP services and sets
their module IDs to -1. In some cases it is possible for a timer to
occur after this happens which calls into res_pjsip_session. The
res_pjsip_session module can then try to get the session from the
INVITE session using the module ID. Since the module ID is now -1
this fails.
This change stores a copy of the module ID and uses it for the timer
callback scenario. If the module ID is -1 the callback immediately
returns but if the module ID is valid then it continues as normal.
This works as the original ID of the module is guaranteed to still
be valid when used with the INVITE session.
ASTERISK-26127 #close
Change-Id: I88df72525c4e9ef9f19c13aedddd3ac4a335c573
Announcer channels were not being destroyed because the
stasis_app_control structure that referenced them was not being
destroyed. The control structure was not being destroyed because it was
not being unlinked from its container. It was not being unlinked from
its container because the after bridge callback for the announcer
channel was not being run. The after bridge callback was not being run
because the after bridge datastore was not being removed from the
channel on destruction. The channel was not being destroyed because the
hangup that used to destroy the channel was now only reducing the
reference count to one. The reference count of the channel was only
being reduced to one because the stasis_app_control structure was
holding the final reference...
The control structure used to not keep a reference to the channel, so
that loop described above did not happen.
The solution is to manually remove the control structure from its
container when the playback on a bridge is complete.
ASTERISK-26083 #close
Reported by Joshua Colp
Change-Id: I0ddc0f64484ea0016245800b409b567dfe85cfb4
* In unload_module(), reordered destroying things to minimize the window
that the global transports container could be used by other threads on
shutdown. When shutting down you need to stop things in the opposite
order of creation.
* Put the global transports container into an AO2_GLOBAL_OBJ_STATIC to
eliminate the crash potential by other threads using the container on
shutdown.
* Made struct monitored_transport.sip_received not use
ast_atomic_fetchadd_int() since it is used as a boolean value that is only
set TRUE. It was previously incremented for every received SIP message
and could theoretically overflow.
* In monitored_transport_state_callback(), allocated the monitored
transport object without a lock since the lock was unused.
* In keepalive_global_loaded(), removed releasing the transports container
if the keepalive_thread could not be started. I set it up to be tried
again if the user reloads the configuration.
Change-Id: I8d12d16ef564290fa6d25a32334bb5ce8fdf87ff
ARI was recently outfitted with operations to create and dial channels.
This leads to the ability to try funny stuff. You could create a channel
and then immediately try to play back media on it. You could create a
channel, dial it, and while it is ringing attempt to make it continue in
the dialplan.
This commit attempts to fix this by adding a channel state check to
operations that should not be able to operate on outbound channels that
have not yet answered. If a channel is in an invalid state, we will send
a 412 response.
ASTERISK-26047 #close
Reported by Mark Michelson
Change-Id: I2ca51bf9ef2b44a1dc5a73f2d2de35c62c37dfd8
This patch fixes a race condition processing received REGISTER requests
and their retransmissions caused by REGISTER requests being processed by
two threads. The "sip_transaction Unable to register REGISTER transaction
(key exists)" message is a notable symptom of this issue.
This issue was more likely to happen before the pjsip/distributor
serializers were created. Instead of steps one and two below placing the
REGISTER messages into the same pjsip/distributor they were placed in
random pjsip/default serializers.
1) REGISTER requests come in and get placed on the pjsip/distributor
serializer.
2) Before the first request is processed a retransmission comes in and is
placed on the same pjsip/distributor serializer.
3) The first request goes up the pjsip stack and is then shunted off to
the pjsip/aor/<aor> serializer.
4) Before the first request is completed processing in the pjsip/aor/<aor>
serializer, the second request goes up the pjsip stack and is also shunted
off to the pjsip/aor/<aor> serializer.
5) The first request completes processing and sends out its response.
6) The second request completes processing and tries to send out its
response but pjlib complains that the REGISTER transaction key already
exists.
7) Sadness ensues.
* The race is eliminated by removing the pjsip/aor/<aor> serializer and
continuing the processing in the pjsip/distributor serializer. Now any
retransmissions queued in the pjsip/distributor serializer will be
processed after the first message is completely processed.
ASTERISK-26088 #close
Reported by: Richard Mudgett
Change-Id: I842d714346088bf717ea27437f1dd85bff0bab5a
Sorcery creates taskprocessors for object types to process object observer
callbacks. An API call is needed to be able to set the congestion levels
of these taskprocessors for selected object types.
* Updated PJSIP's contact and contact_status sorcery object type observer
default congestion levels based upon stress testing. Increased the
congestion levels to reduce the potential for bursty register/unregister
and subscribe/unsubscribe activity from triggering the taskprocessor
overload alert.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6
When taskprocessors get backed up, there is a good chance that we are
being overloaded and need to defer adding new work to the system.
* Implemented a high/low water alert mechanism for modules to check if the
system is being overloaded and take appropriate action. When a
taskprocessor is created it has default congestion levels set. A
taskprocessor can later have those congestion levels altered for specific
needs if stress testing shows that the taskprocessor is a symptom of
overloading or needs to handle bursty activity without triggering an
overload alert.
* Add CLI "core show taskprocessor" low/high water columns.
* Fixed __allocate_taskprocessor() to not use RAII_VAR(). RAII_VAR() was
never a good thing to use when creating a taskprocessor because of the
nature of how its references needed to be cleaned up on a partial
creation.
* Made res_pjsip's distributor check if the taskprocessor overload alert
is active before placing a message representing brand new work onto a
distributor serializer.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I182f1be603529cd665958661c4c05ff9901825fa
We must continue using the serializer that the original INVITE came in on
for the dialog. There may be retransmissions already enqueued in the
original serializer that can result in reentrancy and message sequencing
problems.
Outgoing call legs create the pjsip/outsess/<endpoint> serializers for
their dialogs.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I24d7948749c582b8045d5389ba3f6588508adbbc
* Resolves potential reentrancy problems if system restarted in the middle
of subscription message transactions.
* Fixes memory leak recreating persistent subscriptions when the
subscription resource tree could not be created.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I71e34d7ae8ed35a694f1030e820e2548c48697be
We must continue using the serializer that the original SUBSCRIBE came in
on for the dialog. There may be retransmissions already enqueued in the
original serializer that can result in reentrancy and message sequencing
problems. The "sip_transaction Unable to register SUBSCRIBE transaction
(key exists)" message is a notable symptom of this issue.
Outgoing subscriptions still create the pjsip/pubsub/<endpoint>
serializers for their dialogs.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I18b00bb74a56747b2c8c29543a82440b110bf0b0
Incoming messages that are not part of a dialog or a recognized response
to one of our requests need to be sent to a consistent serializer. Under
load we may be queueing retransmissions before we can process the original
message. We don't need to throw these messages onto random serializers
and cause reentrancy and message sequencing problems.
* Created a pool of pjsip/distributor serializers that get picked by
hashing the call-id and remote tag strings of the received messages.
* Made ast_sip_destroy_distributor() destroy items in the reverse order of
creation.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I2ce769389fc060d9f379977f559026fbcb632407
We should not be processing any incoming messages until we are fully
booted. We may not have dialplan or other needed configuration loaded
yet.
ASTERISK-26089 #close
Reported by: Scott Griepentrog
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I584aefb4f34b885a8927e1f13a2c64babd606264
POSIX defines signal.h. sys/signal.h should not be used as it is
c-library internal header which may or may not exist. Notably with
musl it generates warning of being incorrect.
Change-Id: Ia56b0aa1d84b5c590114867b1b384a624f39a6fc
A crash can occur in res_hep_pjsip or res_hep_rtcp if res_hep has not
loaded and does not have a configuration file. Previously when this
occurred, checks were put in to see if the configuration was loaded
successfully. While this is a good idea - and has been added to the
offending function in res_hep - the reality is res_hep_pjsip and
res_hep_rtcp have no business running if res_hep isn't also running.
As such, this patch also adds a function to res_hep that returns whether
or not it successfully loaded. Oddly enough, ast_module_check returns
"everything is peachy" even if a module declined its load - so it cannot
be solely relied on. res_hep_pjsip and res_hep_rtcp now also check this
function to see if they should continue to load; if it fails, they
decline their load as well.
ASTERISK-26096 #close
Change-Id: I007e535fcc2e51c2ca48534f48c5fc2ac38935ea
Testing has shown that our usage of UnixODBC is problematic
due to bugs within UnixODBC itself as well as the heavy weight
cost of connecting and disconnecting database connections, even
when pooling is enabled.
For users of UnixODBC 2.3.1 and earlier crashes would occur due
to insufficient protection of the disconnect operation. This was
fixed in UnixODBC 2.3.2 and above.
For users of UnixODBC 2.3.3 and higher a slow-down would occur
under heavy database use due to repeated connection establishment.
A regression is present where on each connection the database
configuration is cached again, with the cache growing out of
control.
The connection pool implementation present in this change helps
to mitigate these issues by reducing how much we connect and
disconnect database connections. We also solve the issue of
crashes under UnixODBC 2.3.1 by defaulting the maximum number of
connections to 1, returning us to the previous working behavior.
For users who may have a fixed version the maximum concurrent
connection limit can be increased helping with performance.
The connection pool works by keeping a list of active connections.
If the connection limit has not been reached a new connection is
established. If the connection limit has been reached then the
request waits until a connection becomes available before
continuing.
ASTERISK-26074 #close
ASTERISK-26054 #close
Change-Id: I6774bf4bac49a0b30242c76a09c403d2e856ecff
