This patch adds a new field "portinuri" to the sip dialog struct and the sip peer struct. That field is used during RURI generation to determine if the port should be included in the RURI. It is also used in some places to determine if an SRV lookup should occur.
(closes issue #14418)
Reported by: klaus3000
Tested by: klaus3000, mnicholson
Review: https://reviewboard.asterisk.org/r/369/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@221360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@221086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a 100% CPU problem in the SIP driver, found by profiling
the driver while the problem was occurring.
(closes issue #14309)
Reported by: pkempgen
Patches:
20090924__issue14309.diff.txt uploaded by tilghman (license 14)
Tested by: pkempgen, vrban
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@220873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes building on all systems that don't have bash
at /bin/bash
Reported by _ys on #asterisk-dev
Tested by _ys on #asterisk-dev
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@220027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change introduces a configuration version variable, which ensures that
connections with the old values are not reused but are allowed to expire
normally.
(closes issue #15934)
Reported by: viniciusfontes
Patches:
20090922__issue15934.diff.txt uploaded by tilghman (license 14)
Tested by: viniciusfontes
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@219816 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The iax frame's retrans sched id was written over right
before iax2_frame_free was called. In iax2_frame_free that
retrans id is used to delete the sched item. By writing over
the retrans field before the sched item could be deleted, it was
possible for a retransmit to occur on a freed frame.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@219519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
INVITE requests must always contain a new unique branch id. When
a new branch id is created for an INVITE, the dialog's invite_branch
variable must be updated so CANCEL requests use the correct branch id.
(closes issue #15262)
Reported by: maniax
Patches:
asterisk-1.6.1.0-sip-branch.patch uploaded by tweety (license 608)
invite_new_branch_trunk.diff uploaded by dvossel (license 671)
Tested by: maniax, dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@219450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch cleans up the locking logic in chan_sip.c's
handle_invite_replaces() function as well as making use
of ast_do_masquerade() rather than forcing the masquerade
on an ast_read(). The code had several redundant unlocks
that would result in 'freed more times than we've locked!'
errors. I cleaned these up as well as moving all the unlock
logic to the end of the function. This patch should also
resolve the issue people were having with the replacecall
channel never being unlocked with one legged calls.
(closes issue #15151)
Reported by: irroot
Patches:
invite_w_replaces_1.4.diff uploaded by dvossel (license 671)
Tested by: irroot, dvossel
Review: https://reviewboard.asterisk.org/r/371/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@219303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fix may potentially cause problems with CDR backends that access the channel a CDR is associated with via the channel list. This fix makes the channel unavabile at the time when the CDR backend is invoked. This has been documented in include/asterisk/cdr.h.
(closes issue #15316)
Reported by: vmarrone
Tested by: mnicholson
Review: https://reviewboard.asterisk.org/r/362/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@219136 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pattern matching for extensions uses a type of scoring system, giving values for
specificity to each character in the pattern. Unfortunately, this is done character
by character, in order. This does lead to some less specific patterns being first
in line for matching, but it will usually get the job done.
This patch merely brings CID matching to the same level as extension matching.
This patch does not attempt to tackle the problem shared by extension matching.
(closes issue #14708)
Reported by: klaus3000
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@218867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The firmware can now be found on downloads.digium.com, where the rest of our
binary downloads live. This was the last part of our Asterisk tarballs that
was considered non-free by Debian. :-)
(closes issue #15838)
Reported by: paravoid
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@218798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, not in the original bug report, but related fields are accountcode and
musicclass, and the inheritance of datastores.
(closes issue #15372)
Reported by: Romik
Patches:
20090828__issue15372.diff.txt uploaded by tilghman (license 14)
Tested by: cervajs
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@218577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After talking to rmudgett about some of his recent iflist locking changes, it
was determined that the only place that would destroy a channel without being
explicitly to do so was in handle_init_event. The loop to walk the interface
list has been modified to wait to destroy the channel until the dahdi_pvt of
the channel to be destroyed is no longer needed.
(closes issue #15378)
Reported by: samy
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@218401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The IAX2 Call Token security patch inadvertently broke the use of
encryption due to the reorganization of code in the socket_process()
function. When encryption is used, an incoming full frame must first
be decrypted before the information elements can be parsed. The
security release mistakenly moved IE parsing before decryption in
order to process the new Call Token IE. To resolve this, decryption
of full frames is once again done before looking into the frame. This
involves searching for an existing callno, checking the pvt to see if
encryption is turned on, and decrypting the packet before the internal
fields of the full frame are accessed.
associated with AST-2009-006
(closes issue #15834)
Reported by: karesmakro
Patches:
iax2_encryption_fix_1.4.diff uploaded by dvossel (license 671)
Tested by: dvossel, karesmakro
Review: https://reviewboard.asterisk.org/r/355/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@217806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove code that causes loops in registrations.
We have agreed that the patch that this code was part of was bad. I am ripping out the code that causes
the issue. putnopvut needs to check the rest of the patch, if it needs to be changed as well.
This solves the issue reported in #15540, but needs more work before we close it (as described above).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@217668 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The issue at hand is that some legacy (dying) PBX systems send empty media frames on PRI
links *before* any call progress. The SIP channel receives these frames and by default
signals 183 Session progress and starts sending media. This will cause phones to
play silence and ignore the later 180 ringing message. A bad user experience.
The fix is twofold:
- We discovered that asterisk apps that support early media ("noanswer") did not send
any PROGRESS frame to indicate early media. Fixed.
- We introduce a setting in chan_sip so that users can disable any relay of media frames
before the outbound channel actually indicates any sort of call progress.
In 1.4, 1.6.0 and 1.6.1, this will be disabled for backward compatibility. In later versions
of Asterisk, this will be enabled. We don't assume that it will change your Asterisk
phone experience - only for the better.
We encourage third-party application developers to make sure that if they have applications
that wants to send early media, add a PROGRESS control frame transmission to make sure that
all channel drivers actually will start sending early media. This has not been the default
in Asterisk previous to this patch, so if you got inspiration from our code, you need to
update accordingly. Sorry for the trouble and thanks for your support.
This code has been running for a few months in a large scale installation (over 250
servers with PRI and/or BRI links to old PBX systems).
That's no proof that this is an excellent patch, but, well, it's tested :-)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@216430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
