dialog_unref() and dialog_ref() in 1.6.0 where only place holders
for reference counting once it was implemented. The functions
did nothing but return the pointer on ref and NULL on unref. These
calls have been removed to make way for a patch that actually does
dialog ref counting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@204652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204301 | mmichelson | 2009-06-29 17:50:35 -0500 (Mon, 29 Jun 2009) | 15 lines
Merged revisions 204300 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204300 | mmichelson | 2009-06-29 17:45:34 -0500 (Mon, 29 Jun 2009) | 9 lines
Add error message so that it is clear why a SIP peer was not processed when
a DNS lookup fails on a host or outboundproxy.
(closes issue #13432)
Reported by: p_lindheimer
Patches:
outboundproxy.patch uploaded by p (license 558)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@204302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204247 | mmichelson | 2009-06-29 16:48:54 -0500 (Mon, 29 Jun 2009) | 32 lines
Merged revisions 204243,204246 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204243 | mmichelson | 2009-06-29 16:23:43 -0500 (Mon, 29 Jun 2009) | 22 lines
Fix a problem where chan_sip would ignore "old" but valid responses.
chan_sip has had a problem for quite a long time that would manifest when
Asterisk would send multiple SIP responses on the same dialog before receiving
a response. The problem occurred because chan_sip only kept track of the highest
outgoing sequence number used on the dialog. If Asterisk sent two requests out,
and a response arrived for the first request sent, then Asterisk would ignore
the response. The result was that Asterisk would continue retransmitting the
requests and ignoring the responses until the maximum number of retransmissions
had been reached.
The fix here is to rearrange the code a bit so that instead of simply comparing
the sequence number of the response to our latest outgoing sequence number, we
walk our list of outstanding packets and determine if there is a match. If there is,
we continue. If not, then we ignore the response.
In doing this, I found a few completely useless variables that I have now removed.
(closes issue #11231)
Reported by: flefoll
Review: https://reviewboard.asterisk.org/r/298
........
r204246 | mmichelson | 2009-06-29 16:37:05 -0500 (Mon, 29 Jun 2009) | 3 lines
Fix build oops.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@204248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r203116 | russell | 2009-06-25 11:04:10 -0500 (Thu, 25 Jun 2009) | 18 lines
Merged revisions 203115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203115 | russell | 2009-06-25 11:02:16 -0500 (Thu, 25 Jun 2009) | 11 lines
Resolve a crash related to a T.38 reinvite race condition.
This change resolves a crash observed locally during some T.38 testing.
A call was set up using a call file, and when the T.38 reinvite came in,
the channel state was still AST_STATE_DOWN. The reason is explained by
a comment in the code that previously lived in the handling of
AST_STATE_RINGING. This change modifies the logic to handle the same
race condition for any channel state that is not UP.
(closes ABE-1895)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@203117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202343 | mmichelson | 2009-06-22 09:58:24 -0500 (Mon, 22 Jun 2009) | 36 lines
Merged revisions 202341-202342 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202341 | mmichelson | 2009-06-22 09:42:55 -0500 (Mon, 22 Jun 2009) | 26 lines
Fix a situation in which Asterisk would not stop retransmitting 487s.
If a CANCEL were received by Asterisk, we would send a 487 in response
to the original INVITE and a 200 OK for the CANCEL. If there were a network
hiccup which caused the 200 OK and the 487 to be lost, then the UA communicating
with Asterisk may try to retransmit its CANCEL. Asterisk's response to this used
to be to try sending another 487 to the canceled INVITE and another 200 OK to the
CANCEL.
The problem here is that the originally-sent 487 was sent "reliably" meaning that
it will be retransmitted until it is received properly. So when we receive the second
CANCEL it is likely that the first batch of 487s we sent is still going strong and
reaches the UA. The result was that the second set of 487s would be retransmitted
constantly until the maximum number of retries had been reached.
The fix for this is that if we receive a second CANCEL for an INVITE, then we cancel
the retransmission of the first set of 487s and start a second set. This causes the
dialog to be terminated reasonably.
(closes issue #14584)
Reported by: klaus3000
Patches:
14584_v2.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
........
r202342 | mmichelson | 2009-06-22 09:44:58 -0500 (Mon, 22 Jun 2009) | 3 lines
Remove an extra debug line left from previous commit.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@202344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202337 | mmichelson | 2009-06-22 09:35:09 -0500 (Mon, 22 Jun 2009) | 31 lines
Merged revisions 202336 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202336 | mmichelson | 2009-06-22 09:34:05 -0500 (Mon, 22 Jun 2009) | 25 lines
Fix a possible infinite loop in SDP parsing during glare situation.
There was a while loop in get_ip_and_port_from_sdp which was controlled
by a call to get_sdp_iterate. The loop would exit either if what we were
searching for was found or if the return was NULL. The problem is that
get_sdp_iterate never returns NULL. This means that if what we were searching
for was not present, the loop would run infinitely. This modification of the
loop fixes the problem.
(closes issue #15213)
Reported by: schmidts
(closes issue #15349)
Reported by: samy
(closes issue #14464)
Reported by: pj
(closes issue #15345)
Reported by: aragon
Patches:
sip_inf_loop.patch uploaded by mmichelson (license 60)
Tested by: aragon
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@202338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201462 | mmichelson | 2009-06-17 15:10:01 -0500 (Wed, 17 Jun 2009) | 12 lines
Fix problem with no audio due to ignoring the SDP.
A recent change to our SDP version comparison made audio not function
on some calls. This was because of a test wherein we were trying to
see if an unsigned value was less than 0. This is a dumb comparison
and arguably the compiler should have warned about it. Alas, though,
it slipped past. Now it's fixed by changing the variable to be a
signed type.
Found by several developers. Tested by mnicholson and dbrooks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@201463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200946 | dvossel | 2009-06-16 11:03:30 -0500 (Tue, 16 Jun 2009) | 32 lines
SIP transport type issues
What this patch addresses:
1. ast_sip_ouraddrfor() by default binds to the UDP address/port
reguardless if the sip->pvt is of type UDP or not. Now when no
remapping is required, ast_sip_ouraddrfor() checks the sip_pvt's
transport type, attempting to set the address and port to the
correct TCP/TLS bindings if necessary.
2. It is not necessary to send the port number in the Contact
header unless the port is non-standard for the transport type.
This patch fixes this and removes the todo note.
3. In sip_alloc(), the default dialog built always uses transport
type UDP. Now sip_alloc() looks at the sip_request (if present)
and determines what transport type to use by default.
4. When changing the transport type of a sip_socket, the file
descriptor must be set to -1 and in some cases the tcptls_session's
ref count must be decremented and set to NULL. I've encountered
several issues associated with this process and have created a function,
set_socket_transport(), to handle the setting of the socket type.
(closes issue #13865)
Reported by: st
Patches:
dont_add_port_if_tls.patch uploaded by Kristijan (license 753)
13865.patch uploaded by mmichelson (license 60)
tls_port_v5.patch uploaded by vrban (license 756)
transport_issues.diff uploaded by dvossel (license 671)
Tested by: mmichelson, Kristijan, vrban, jmacz, dvossel
Review: https://reviewboard.asterisk.org/r/278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@200992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r165180 | mnicholson | 2008-12-17 12:49:12 -0600 (Wed, 17 Dec 2008) | 14 lines
This patch adds a new 'ignoresdpversion' option to sip.conf. When this is
enabled (either globally or for a specific peer), chan_sip will treat any SDP
data it receives as new data and update the media stream accordingly. By
default, Asterisk will only modify the media stream if the SDP session version
received is different from the current SDP session version. This option is
required to interoperate with devices that have non-standard SDP session
version implementations (observed by toc on the bug tracker with Microsoft OCS
which always uses 0 as the session version).
http://reviewboard.digium.com/r/94/
(closes issue #13958)
Reported by: toc
Tested by: toc
........
r200689 | kpfleming | 2009-06-15 15:42:38 -0500 (Mon, 15 Jun 2009) | 12 lines
Accept T.38 re-INVITE responses with invalid SDP versions.
This commit changes the 'incoming SDP version' check logic a bit more; when
'ignoresdpversion' is *not* set for a peer, if we initiate a re-INVITE to
switch to T.38, we'll always accept the peer's SDP response, even if they
don't properly increment the SDP version number as they should. If this situation
occurs, a warning message will be generated suggesting that the peer's
configuration be changed to include the 'ignoresdpversion' configuration option
(although ideally they'd fix their SIP implementation to be RFC compliant).
AST-221
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@200724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r199818 | dvossel | 2009-06-09 15:47:57 -0500 (Tue, 09 Jun 2009) | 11 lines
CLI NOTIFY sending wrong transport type.
SIP's cli NOTIFY command only used UDP rather than copying the transport type from the peer.
(closes issue #15283)
Reported by: jthurman
Patches:
sip-notify-tcp-svn199728.patch uploaded by jthurman (license 614)
Tested by: jthurman, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@199821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197621 | eliel | 2009-05-28 12:01:48 -0400 (Thu, 28 May 2009) | 19 lines
Merged revisions 197562 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197562 | eliel | 2009-05-28 11:21:32 -0400 (Thu, 28 May 2009) | 13 lines
Use the address we already know when reloading a peer with nat=yes.
If we already have an address for a peer, and we are reloading the sip
configuration, try to use that address to contact the peer, instead of
getting it from the Contact.
(closes issue #15194)
Reported by: ibc
Patches:
sip.patch uploaded by eliel (license 64)
Tested by: manwe
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197606 | mmichelson | 2009-05-28 10:32:19 -0500 (Thu, 28 May 2009) | 22 lines
Recorded merge of revisions 197588 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197588 | mmichelson | 2009-05-28 10:27:49 -0500 (Thu, 28 May 2009) | 16 lines
Allow for media to arrive from an alternate source when responding to a reinvite with 491.
When we receive a SIP reinvite, it is possible that we may not be able to process the
reinvite immediately since we have also sent a reinvite out ourselves. The problem is
that whoever sent us the reinvite may have also sent a reinvite out to another party,
and that reinvite may have succeeded.
As a result, even though we are not going to accept the reinvite we just received, it
is important for us to not have problems if we suddenly start receiving RTP from a new
source. The fix for this is to grab the media source information from the SDP of the
reinvite that we receive. This information is passed to the RTP layer so that it will
know about the alternate source for media.
Review: https://reviewboard.asterisk.org/r/252
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197467 | file | 2009-05-28 10:47:45 -0300 (Thu, 28 May 2009) | 15 lines
Merged revisions 197466 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197466 | file | 2009-05-28 10:44:58 -0300 (Thu, 28 May 2009) | 8 lines
Fix a bug where the flag indicating the presence of rport would get overwritten by the nat setting.
The presence of rport is now stored as a separate flag. Once the dialog is setup and authenticated
(or it passes through unauthenticated) the proper nat flag is set.
(closes issue #13823)
Reported by: dimas
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r196416 | dvossel | 2009-05-22 16:09:45 -0500 (Fri, 22 May 2009) | 19 lines
SIP set outbound transport type from Registration
In sip.conf the transport option allows for the configuration of what transport types (udp, tcp, and tls) a peer will accept, but only the first type listed was used for outbound connections. This patch changes this. Now the default transport type is only used until the peer registers. When registration takes place the transport type is parsed out of the Contact header. If the Contact header's transport type is equal to one that the peer supports, the peer's default transport type for outbound connections is set to match the Contact header's type. If the Contact header's transport type is not present, then the peer's default transport type is set to match the one the peer registered with. When a peer unregisters or the registration expires, the default transport type for that peer is reset.
(closes issue #12282)
Reported by: rjain
Patches:
reg_patch_1.diff uploaded by dvossel (license 671)
Tested by: dvossel
(closes issue #14727)
Reported by: pj
Patches:
reg_patch_3.diff uploaded by dvossel (license 671)
Tested by: pj, dvossel
Review: https://reviewboard.asterisk.org/r/249/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@196454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r194496 | mmichelson | 2009-05-14 17:20:51 -0500 (Thu, 14 May 2009) | 30 lines
Merged revisions 194484 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194484 | mmichelson | 2009-05-14 17:17:55 -0500 (Thu, 14 May 2009) | 24 lines
Fix a race condition where a reinvite could trigger a 482 response.
The loop detection/spiral detection code in chan_sip used the owner
channel's state as a criterion for determining if the incoming INVITE
is a looped request. The problem with this is that the INVITE-handling
code happens in a different thread than the thread that marks the owner
channel as being up. As a result, if a reinvite were to come in very quickly,
say from another Asterisk on the same LAN, it was possible for the reinvite
to arrive before the owner channel had been set to the up state.
This patch corrects the problem by using the invitestate of the sip_pvt
instead, since that can be guaranteed to be set correctly by the time
the reinvite arrives. Since there is a switch statement further in the
INVITE-handling code, the AST_STATE_RINGING state also checks the invitestate
of the sip_pvt in case we should actually be treating the channel as if it were
up already.
(closes issue #12215)
Reported by: jpyle
Patches:
12215_confirmed.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@194504 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r193954 | mmichelson | 2009-05-12 15:28:13 -0500 (Tue, 12 May 2009) | 18 lines
Update spiral support in trunk and 1.6.X to match what is in 1.4.
In 1.4, a SIP spiral is treated the same way as a call forward. This
works much better than what is currently in trunk and 1.6.X. The code
in trunk and 1.6.X did not create a new call to the recipient of the spiral,
instead trying to continue the same call. In addition to just being plain
wrong, this also had the side effect of only being able to spiral calls
to other SIP channels.
With this in place, as long as call forwards are honored, SIP spirals
will work properly. This means that it will work for outbound calls
made by the Queue, Dial, and Page applications. For originated calls and
spool calls, however, the spiral will not work properly until a generic
call forward mechanism is introduced into Asterisk.
(relates to issue #13630)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r193387 | dvossel | 2009-05-08 15:32:51 -0500 (Fri, 08 May 2009) | 7 lines
TCP not matching valid peer.
find_peer() does not find a valid peer when using pvt->recv as the sockaddr_in argument. Because of the way TCP works, the port number in pvt->recv is not what we're looking for at all. There is currently only one place that find_peer searches for a peer using the sockaddr_in argument. If the peer is not found after using pvt->recv (works for UDP since the port number will be correct), a temp sockaddr_in struct is made using the Contact header in the sip_request. This has the correct port number in it.
Review: http://reviewboard.digium.com/r/236/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r192933 | tilghman | 2009-05-07 11:43:56 -0500 (Thu, 07 May 2009) | 17 lines
Merged revisions 192932 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r192932 | tilghman | 2009-05-07 11:29:08 -0500 (Thu, 07 May 2009) | 10 lines
Eliminate repetition of fullcontact during reconstruction.
If the fullcontact field appears in both the sippeers and the
sipregs table, then during reconstruction of the field, it will
otherwise be doubled.
(closes issue #14754)
Reported by: Alexei Gradinari
Patches:
20090506__bug14754.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@192934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r192387 | file | 2009-05-05 11:22:47 -0300 (Tue, 05 May 2009) | 10 lines
Fix a bug with setting t38pt_udptl at the user or peer level.
If an incoming call authenticated as a user or peer and t38pt_udptl was
not set to yes in general then no UDPTL session would be present and any
T38 related things would fail. This commit changes it so that if after
authenticating T38 is enabled but no UDPTL session is present one will be
created.
(issue AST-215)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@192397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189771 | dvossel | 2009-04-21 15:28:37 -0500 (Tue, 21 Apr 2009) | 11 lines
Fixes segfault when switching UDP to TCP in sip.conf after reload.
If transport in sip.conf is switched from UDP to TCP, Asterisk segfaults right after issuing a sip reload. The problem is the socket type is changed to TCP but the fd may still be present for UDP. Later, when the TCP session should be created or set using an existing one, it isn't because the old file descriptor is still present. Now every time transport is changed during a sip.conf reload, the file descriptor is set to -1, signifying it must be created or found.
(closes issue #14727)
Reported by: pj
Tested by: dvossel
Review: http://reviewboard.digium.com/r/229/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189097 | mmichelson | 2009-04-17 15:20:23 -0500 (Fri, 17 Apr 2009) | 13 lines
Prevent a crash when SIP blonde transferring an unbridged call.
If one attempts to use the attended transfer button on a SIP phone
to transfer an unbridged call (such as a call to an IVR) but hangs
up while the target of the transfer is still ringing, we need to not
crash.
The problem was that ast_hangup was called from outside the channel
thread.
AST-211
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r188947 | file | 2009-04-17 11:44:56 -0300 (Fri, 17 Apr 2009) | 22 lines
Merged revisions 188946 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188946 | file | 2009-04-17 11:41:25 -0300 (Fri, 17 Apr 2009) | 15 lines
Fix a bug where a value used to create the channel name was bogus.
This commit fixes the scenario where an incoming call is authenticated
using a peer entry. Previously the channel name was created using either
the username setting from the sip.conf entry or the IP address that the
call came from. Now the channel name will be created using the peer name
itself. This commit will not change the way the channel name is generated
for users or friends.
(closes issue #14256)
Reported by: Nick_Lewis
Patches:
chan_sip.c-chname.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis, file
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r188247 | file | 2009-04-14 10:14:21 -0300 (Tue, 14 Apr 2009) | 7 lines
Fix a bug with the change I made yesterday to outbound proxy support.
Per discussion with oej on IRC we need the actual IP address, not the
outbound proxy IP address, in the sa field. This change matches the already
existing code for all other uses of the outbound proxy setting.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r188067 | file | 2009-04-13 13:28:06 -0300 (Mon, 13 Apr 2009) | 10 lines
Fix a bug where using an outbound proxy would cause the local address to be 127.0.0.1.
Copy the outbound proxy IP address into the SIP dialog structure as the IP address we will
be sending to. This has to be done because the logic that determines what local IP address to use
in the SIP messages is not aware of an outbound proxy being in place. It only knows what IP address
we are sending to.
(closes issue #12006)
Reported by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A note to all of you. Don't block revisions in a branch if you actually
meant to merge them. Two very old revisions somehow didn't get merged into
1.6.0 and this change was dependent on those two old revisions. What should have
taken 2 minutes has now wasted about 30 minutes of my time :(
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@187555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r141810 | mmichelson | 2008-09-08 16:18:49 -0500 (Mon, 08 Sep 2008) | 22 lines
Merged revisions 141809 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141809 | mmichelson | 2008-09-08 16:10:10 -0500 (Mon, 08 Sep 2008) | 14 lines
Fix pedantic mode of chan_sip to only check the
remote tag of an endpoint once a dialog has
been confirmed. Up until that point, it is possible
and legal for the far-end to send provisional
responses with a different To: tag each time. With
this patch applied, these provisional messages
will not cause a matching problem.
(closes issue #11536)
Reported by: ibc
Patches:
11536v2.patch uploaded by putnopvut (license 60)
........
................
r141868 | mmichelson | 2008-09-08 17:14:40 -0500 (Mon, 08 Sep 2008) | 4 lines
Um, apparently I didn't actually finish merging before committing.
Bad bad bad
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@187554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
