https://origsvn.digium.com/svn/asterisk/trunk
........
r123652 | mmichelson | 2008-06-18 10:08:56 -0500 (Wed, 18 Jun 2008) | 7 lines
A portion of the code which handled the 'c' queue option had been
removed. No telling when it happened. Anyway, it's back in now
and works properly.
(Based on issue reported on mailing list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@123653 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r123275 | mmichelson | 2008-06-17 10:57:43 -0500 (Tue, 17 Jun 2008) | 20 lines
Merged revisions 123274 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r123274 | mmichelson | 2008-06-17 10:56:55 -0500 (Tue, 17 Jun 2008) | 12 lines
davidw pointed out that the holdtime calculation used by
app_queue does not use "boxcar" filtering as the comments
say. The term "boxcar" means that the number of samples used
to calculate stays constant, with new samples replacing the
oldest ones. The queue holdtime calculation uses all holdtime
samples collected since the queue was loaded, so the comment
has been changed to be accurate.
(closes issue #12781)
Reported by: davidw
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@123276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r123165 | murf | 2008-06-16 14:43:46 -0600 (Mon, 16 Jun 2008) | 19 lines
(closes issue #12689)
Reported by: ys
Many thanks to ys for doing the research on this problem.
I didn't think it would be best to unlock the contexts
and then relock them after the remove_extension2() call,
so I added an extra arg to remove_extension2() and set it
appropriately in each call. There were not that many.
I considered forcing the code to lock the contexts before
the call to remove_extension2(), but that would require
a slightly greater degree of changes, especially since
the find_context_locked is local to pbx.c
I did a simple sanity test to make sure the code doesn't
mess things up in general.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@123173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r119419 | tilghman | 2008-05-30 16:23:14 -0500 (Fri, 30 May 2008) | 14 lines
Merged revisions 119404 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119404 | tilghman | 2008-05-30 16:17:45 -0500 (Fri, 30 May 2008) | 6 lines
When joinempty=strict, it only failed on join if there were busy members. If
all members were logged out OR paused, then it (incorrectly) let callers join
the queue.
(closes issue #12451)
Reported by: davidw
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@119420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r115321 | mmichelson | 2008-05-05 16:43:21 -0500 (Mon, 05 May 2008) | 21 lines
Merged revisions 115320 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115320 | mmichelson | 2008-05-05 16:41:34 -0500 (Mon, 05 May 2008) | 13 lines
Don't consider a caller "handled" until the caller is bridged with
a queue member. There was too much of an opportunity for the member
to hang up (either during a delay, announcement, or overly long
agi) between the time that he answered the phone and the time when
he actually was bridged with the caller. The consequence of this
was that if the member hung up in that interval, then proper
abandonment details would not be noted in the queue log if the caller
were to hang up at any point after the member hangup.
(closes issue #12561)
Reported by: ablackthorn
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@115322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r114849 | mmichelson | 2008-04-29 14:42:04 -0500 (Tue, 29 Apr 2008) | 22 lines
Merged revisions 114848 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114848 | mmichelson | 2008-04-29 14:40:06 -0500 (Tue, 29 Apr 2008) | 14 lines
Use the MACRO_CONTEXT and MACRO_EXTEN channel variables instead of the channel's macrocontext
and macroexten fields. This is needed because if macros are daisy-chained, the incorrect
context and extension are placed on the new channel. I also added locking to the channel prior
to accessing these variables as noted in trunk's janitor project file.
(closes issue #12549)
Reported by: darren1713
Patches:
app_queue.c.macroextenpatch uploaded by darren1713 (license 116)
(with modifications from me)
Tested by: putnopvut
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@114850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r114113 | mmichelson | 2008-04-14 11:25:09 -0500 (Mon, 14 Apr 2008) | 17 lines
Merged revisions 114112 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114112 | mmichelson | 2008-04-14 11:24:22 -0500 (Mon, 14 Apr 2008) | 9 lines
If the datastore has been moved to another channel due to a masquerade, then
freeing the datastore here causes an eventual double free when the new channel
hangs up. We should only free the datastore if we were able to successfully remove
it from the channel we are referencing (i.e. the datastore was not moved).
(closes issue #12359)
Reported by: pguido
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@114114 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r111533 | mmichelson | 2008-03-27 19:12:52 -0500 (Thu, 27 Mar 2008) | 10 lines
Fix a crash that would happen when attempting to unload the app_queue module.
The problem was that when the refcount on the queue hit 0, the destructor was
called, and inside the destructor, another function was called which would increase
the refcount back to 1 again and then decrease it again back to 0 for every member
in the queue. This meant that the destructor was being recursively called, leading
to a double free of the queue. This is now fixed by making sure to unlink the
queue from the queues container prior to the final unref of the queue.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@111534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r109714 | mmichelson | 2008-03-18 15:59:02 -0500 (Tue, 18 Mar 2008) | 20 lines
Merged revisions 109713 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109713 | mmichelson | 2008-03-18 15:52:15 -0500 (Tue, 18 Mar 2008) | 12 lines
This patch makes it so that all queue member status changes are handled through device state
code. This removes several problems people were seeing where their queue members would get into
an "unknown" state. Huge props go to atis on this one since he was the one who found the code
section that was causing the problem and proposed the solution. I just wrote what he suggested :)
(closes issue #12127)
Reported by: atis
Patches:
12127v3.patch uploaded by putnopvut (license 60)
Tested by: atis, jvandal
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@109716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r109447 | twilson | 2008-03-18 10:43:34 -0500 (Tue, 18 Mar 2008) | 3 lines
Go through and fix a bunch of places where character strings were being interpreted as format strings. Most of these changes are solely to make compiling with -Wsecurity and -Wformat=2 happy, and were not
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@109459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r107068 | mmichelson | 2008-03-10 10:45:13 -0500 (Mon, 10 Mar 2008) | 10 lines
app_queue has now been doxygenified thanks to snuffy! The ony thing I changed
was the way that locks are referenced, since the old 1.2 names were still used
in the comments.
(closes issue #11997)
Reported by: snuffy
Patches:
bug_11997_queue_doxy.diff uploaded by snuffy (license 35)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@107069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105059 | mmichelson | 2008-02-28 14:11:57 -0600 (Thu, 28 Feb 2008) | 6 lines
When using autofill, members who are in use should be counted towards the
number of available members to call if ringinuse is set to yes.
Thanks to jmls who brought this issue up on IRC
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103956 | mmichelson | 2008-02-20 16:32:22 -0600 (Wed, 20 Feb 2008) | 8 lines
Clear up confusion when viewing the QUEUE_WAITING_COUNT of a
"dead" realtime queue. Since from the user's perspective, the queue
does exist, we shouldn't tell them we couldn't find the queue. Instead
since it is a dead queue, report a 0 waiting count
This issue was brought up on IRC by jmls
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the saying of less-than for holdtime announcements since it can lead to awkward holdtime announcements. Using
'1' as a queue-round-seconds value is no longer valid.
(closes issue #9736)
Reported by: caio1982
Patches:
queue_announce5.diff uploaded by caio1982 (license 22)
Tested by: caio1982, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
not be loaded from realtime queues. This commit fixes that.
Thanks to jmls for pointing this problem out to me on IRC.
This also contains some changes to S_OR where it should be used. Thanks to Qwell for pointing
these out.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r101216 | mmichelson | 2008-01-30 09:23:00 -0600 (Wed, 30 Jan 2008) | 5 lines
Fix a logic error with regards to autofill. Prior to this change, it was possible
for a caller to go out of turn if autofill were enabled and callers ahead in the queue were attempting
to call a member. This change fixes this.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98733 | mmichelson | 2008-01-14 10:21:28 -0600 (Mon, 14 Jan 2008) | 8 lines
Adding explicit defaults for missing options to init_queue. This is necessary because
if a user either removes or comments one of these options and reloads their queues, the
option will not reset to its default, instead maintaining the value from prior to the
reload.
Thanks to John Bigelow for pointing this error out to me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r97304 | mmichelson | 2008-01-08 17:49:11 -0600 (Tue, 08 Jan 2008) | 5 lines
Part 1 of N of adding doxygen comments to app_queue. I picked some of the most common functions
used (which also happen to be some the biggest/ugliest functions too) to document first. I'm pretty
new to doxygen so criticism is welcome.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97307 65c4cc65-6c06-0410-ace0-fbb531ad65f3
will monitor this second device's state for the member, even though it actually calls the first
interface. This ability has been added for statically defined queue members, realtime queue members,
and dynamic queue members added through the CLI, dialplan, or manager.
(closes issue #11603, reported by acidv)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
