(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r102090 | oej | 2008-02-03 11:37:32 +0100 (Sön, 03 Feb 2008) | 8 lines
Handle ACK and CANCEL in an invite transaction - even if we get INFO transactions during the actual call setup.
(closes issue #10567)
Reported by: jacksch
Tested by: oej
Patch by: oej inspired by suggestions from neutrino88 in the bug tracker
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@102091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r101989 | russell | 2008-02-01 17:06:32 -0600 (Fri, 01 Feb 2008) | 5 lines
Change the SDP_SAMPLE_RATE macro. It turns out that even though G.722 is 16 kHz,
it is supposed to specified as 8 kHz in the RTP, and RTP timestamps are supposed
to be calculated based on 8 kHz. (Apparently this is due to a bug in a spec, but
people follow it anyway, because it's the spec ...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
broke realtime configurations which still used the "username" field. This was taken
care of properly when reading from realtime but was not handled properly when updating
a realtime peer. This change also adds a deprecation NOTICE CLI message that will print
if using the deprecated "username" field.
(closes issue #11880)
Reported by: cabal95
Patches:
11880.patch uploaded by putnopvut (license 60)
Tested by: cabal95
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100629 | russell | 2008-01-28 12:34:20 -0600 (Mon, 28 Jan 2008) | 5 lines
For some reason, the use of this strdupa() is leading to memory corruption on
freebsd sparc64. This trivial workaround fixes it.
(closes issue #10300, closes issue #11857, reported by mattias04 and Home-of-the-Brave)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100630 65c4cc65-6c06-0410-ace0-fbb531ad65f3
that was just merged from 1.4, so this is a changeover to those APIs to use the
macro versions, so that we properly detect errors from ast_sched_del, instead
of simply ignoring the return values.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100465 | tilghman | 2008-01-27 15:59:53 -0600 (Sun, 27 Jan 2008) | 11 lines
When deleting a task from the scheduler, ignoring the return value could
possibly cause memory to be accessed after it is freed, which causes all
sorts of random memory corruption. Instead, if a deletion fails, wait a
bit and try again (noting that another thread could change our taskid
value).
(closes issue #11386)
Reported by: flujan
Patches:
20080124__bug11386.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, flujan, stuarth`
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99977 | oej | 2008-01-23 21:58:20 +0100 (Ons, 23 Jan 2008) | 9 lines
Make sure we don't cancel destruction on calls in CANCEL state, even if we
get 183 while waiting for answer on our CANCEL.
(issue #11736)
Reported by: MVF
Patches:
bug11736.txt uploaded by oej (license 306)
Tested by: MVF
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99652 | oej | 2008-01-22 21:56:09 +0100 (Tis, 22 Jan 2008) | 4 lines
Thanks to Russell's education I realize that BUFSIZ has changed since I learned the C language
over 20 years ago... Resetting chan_sip to the size of BUFSIZ that I expected in my old
head to avoid too heavy memory allocations on some systems.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99653 65c4cc65-6c06-0410-ace0-fbb531ad65f3
as a channel variable BRIDGEPVTCALLID
This is important for call tracing in log files and CDRs, so that
the SIP callID can be traced along servers.
The CHANNEL dialplan function won't work here, since the outbound
channel is gone when we need the Call-ID.
Other channel drivers may now implement the same function :-),
but this patch only supports chan_sip.so.
Inspired by (issue #11816)
Reported by: ctooley
Patch by oej
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces TCP and TLS support for chan_sip. There are various
new options in configs/sip.conf.sample that are used to enable these features. Also,
there is a document, doc/siptls.txt that describes some things in more detail.
This code was implemented by Brett Bryant and James Golovich. It was reviewed
by Joshua Colp and myself. A number of other people participated in the testing
of this code, but since it was done outside of the bug tracker, I do not have their
names. If you were one of them, thanks a lot for the help!
(closes issue #4903, but with completely different code that what exists there.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces SIP session timers support (RFC 4028). In short,
this prevents stuck SIP sessions that were not properly torn down due to network
or endpoint failures during an established SIP session.
To quote some of the documentation supplied with the patch:
"The SIP Session-Timers is an extension of the SIP protocol that allows end-points and proxies to
refresh a session periodically. The sessions are kept alive by sending a RE-INVITE or UPDATE
request at a negotiated interval. If a session refresh fails then all the entities that support Session-
Timers clear their internal session state. In addition, UAs generate a BYE request in order to clear
the state in the proxies and the remote UA (this is done for the benefit of SIP entities in the path
that do not support Session-Timers)."
(closes issue #10665)
Reported by: rjain
Patches:
chan_sip.c.1.diff uploaded by rjain (license 226)
chan_sip.c.diff uploaded by rjain (license 226)
sip.conf.sample.diff uploaded by rjain (license 226)
proc_422_rsp_comment.diff uploaded by rjain (license 226)
chan_sip.c.cache.diff uploaded by rjain (license 226)
chan_sip.memalloc uploaded by rjain (license 226)
chan_sip.memalloc.bugfix uploaded by rjain (license 226)
Patches tracked in team/group/sip_session_timers, with some additional fixes
by russell and oej.
Tested by: jtodd, rjain, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98955 | file | 2008-01-15 23:07:24 -0400 (Tue, 15 Jan 2008) | 6 lines
Don't drop the old record route information when dealing with packets related to a reinvite.
(closes issue #11545)
Reported by: kebl0155
Patches:
reinvite-patch.txt uploaded by kebl0155 (license 356)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98946 | russell | 2008-01-15 17:50:10 -0600 (Tue, 15 Jan 2008) | 11 lines
Change a buffer in check_auth() to be a thread local dynamically allocated
buffer, instead of a massive buffer on the stack. This fixes a crash reported
by Qwell due to running out of stack space when building with LOW_MEMORY defined.
On a very related note, the usage of BUFSIZ in various places in chan_sip is
arbitrary and careless. BUFSIZ is a system specific define. On my machine,
it is 8192, but by definition (according to google) could be as small as 256.
So, this buffer in check_auth was 16 kB. We don't even support SIP messages
larger than 4 kB! Further usage of this define should be avoided, unless it
is used in the proper context.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to set the qualify frequency.
(closes issue #11597)
Reported by: wilder
Patches:
qualifyfreq5.patch uploaded by wilder (license 362)
-- with some mods by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r97973 | tilghman | 2008-01-10 17:08:36 -0600 (Thu, 10 Jan 2008) | 6 lines
1) When we get a translated frame out, clone it, because if the
translator pvt is freed before we use the frame, bad things happen.
2) Getting a failure from ast_sched_delete means that the schedule
ID is currently running. Don't just ignore it.
(Closes issue #11698)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
