https://origsvn.digium.com/svn/asterisk/trunk
................
r188947 | file | 2009-04-17 11:44:56 -0300 (Fri, 17 Apr 2009) | 22 lines
Merged revisions 188946 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188946 | file | 2009-04-17 11:41:25 -0300 (Fri, 17 Apr 2009) | 15 lines
Fix a bug where a value used to create the channel name was bogus.
This commit fixes the scenario where an incoming call is authenticated
using a peer entry. Previously the channel name was created using either
the username setting from the sip.conf entry or the IP address that the
call came from. Now the channel name will be created using the peer name
itself. This commit will not change the way the channel name is generated
for users or friends.
(closes issue #14256)
Reported by: Nick_Lewis
Patches:
chan_sip.c-chname.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis, file
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@188949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r188647 | dvossel | 2009-04-15 17:10:04 -0500 (Wed, 15 Apr 2009) | 18 lines
Merged revisions 188646 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188646 | dvossel | 2009-04-15 17:08:40 -0500 (Wed, 15 Apr 2009) | 12 lines
National prefix inserted even when caller ID not available
When the caller ID is restricted, the expected behavior is for the caller id to be blank. In chan_dahdi, the national prefix is placed onto the callers number even if its restricted (empty) causing the caller id to be the national prefix rather than blank.
(closes issue #13207)
Reported by: shawkris
Patches:
national_prefix.diff uploaded by dvossel (license 671)
Review: http://reviewboard.digium.com/r/220/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@188649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r188247 | file | 2009-04-14 10:14:21 -0300 (Tue, 14 Apr 2009) | 7 lines
Fix a bug with the change I made yesterday to outbound proxy support.
Per discussion with oej on IRC we need the actual IP address, not the
outbound proxy IP address, in the sa field. Upon further inspection
this should make the behaviour of all other uses of the outbound proxy
in the code.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@188254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r188067 | file | 2009-04-13 13:28:06 -0300 (Mon, 13 Apr 2009) | 10 lines
Fix a bug where using an outbound proxy would cause the local address to be 127.0.0.1.
Copy the outbound proxy IP address into the SIP dialog structure as the IP address we will
be sending to. This has to be done because the logic that determines what local IP address to use
in the SIP messages is not aware of an outbound proxy being in place. It only knows what IP address
we are sending to.
(closes issue #12006)
Reported by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@188069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r187906 | jpeeler | 2009-04-10 15:26:46 -0500 (Fri, 10 Apr 2009) | 12 lines
Fix module embedding for chan_h323.
Include libchanh323.a in the modules.link file so that all the symbols can be
resolved at link time.
(closes issue #11966)
Reported by: dome
Patches:
issue_11966.patch uploaded by kpfleming (license 421)
Tested by: jpeeler
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r187488 | mmichelson | 2009-04-09 13:58:41 -0500 (Thu, 09 Apr 2009) | 24 lines
Merged revisions 187484 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r187484 | mmichelson | 2009-04-09 13:51:20 -0500 (Thu, 09 Apr 2009) | 18 lines
Handle a SIP race condition (reinvite before an ACK) properly.
RFC 5047 explains the proper course of action to take if a
reINVITE is received before the ACK from a previous invite
transaction. What we are to do is to treat the reINVITE as
if it were both an ACK and a reINVITE and process it normally.
Later, when we receive the ACK we had been expecting, we will
ignore it since its CSeq is less than the current iseqno of
the sip_pvt representing this dialog.
(closes issue #13849)
Reported by: klaus3000
Patches:
13849_v2.patch uploaded by mmichelson (license 60)
Tested by: mmichelson, klaus3000
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@187495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r186461 | kpfleming | 2009-04-03 15:20:01 -0500 (Fri, 03 Apr 2009) | 11 lines
Merged revisions 186458 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186458 | kpfleming | 2009-04-03 15:19:20 -0500 (Fri, 03 Apr 2009) | 5 lines
Fix a bug where DAHDI/Zaptel channels would not properly switch formats when requested
Don't offer AST_FORMAT_SLINEAR on DAHDI/Zaptel channels... while it could provide a slight performance benefit, the translation core in Asterisk has some flaws when a channel driver offers multiple raw formats. this fix is much simpler than fixing the translation core to solve that issue (although that will be done later).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@186466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185953 | kpfleming | 2009-04-02 08:51:44 -0500 (Thu, 02 Apr 2009) | 11 lines
Merged revisions 185952 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185952 | kpfleming | 2009-04-02 08:43:43 -0500 (Thu, 02 Apr 2009) | 5 lines
the DAHDI_GETCONF, DAHDI_SETCONF and DAHDI_GET_PARAMS ioctls were recently corrected to show that they do, in fact, read data from userspace as part of their work. due to this fix, valgrind now reports a number of cases where chan_dahdi passed an uninitialized (or partially) buffer to these ioctls, which could lead to unexpected behavior.
this patch corrects chan_dahdi to ensure that buffers passed to these ioctls are always fully initialized.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185846 | dvossel | 2009-04-01 14:03:32 -0500 (Wed, 01 Apr 2009) | 16 lines
Merged revisions 185845 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185845 | dvossel | 2009-04-01 14:02:00 -0500 (Wed, 01 Apr 2009) | 10 lines
Fixes issue with dropped calles due to re-Invite glare and re-Invites never executing after a 491
Acknowledgement for 491 responses were never being processed because it didn't match our pending invite's seqno. Since the ACK was never processed, the 491 frame would continue to be retransmitted until eventually the call was dropped due to max retries. Now during a pending invite, if we receive another invite, we send an 491 and hold on to that glare invite's seqno in the "glareinvite" variable for that sip_pvt struct. When ACK's are received, we first check to see if it is in response to our pending invite, if not we check to see if it is in response to a glare invite. In this case, it is in response to the glare invite and must be dealt with or the call is dropped. I've changed the wait time for resending the re-Invite after receving a 491 response to comply with RFC 3261. Before this patch the scheduled re-Invite would only change a flag indicating that the re-Invite should be sent out, now it actually sends it out as well.
(closes issue #12013)
Reported by: alx
Review: http://reviewboard.digium.com/r/213/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185363 | dbrooks | 2009-03-31 11:46:57 -0500 (Tue, 31 Mar 2009) | 44 lines
Merged revisions 185362 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185362 | dbrooks | 2009-03-31 11:37:12 -0500 (Tue, 31 Mar 2009) | 35 lines
Fix incorrect parsing in chan_gtalk when xmpp contains extra whitespaces
To drill into the xmpp to find the capabilities between channels, chan_gtalk
calls iks_child() and iks_next(). iks_child() and iks_next() are functions in
the iksemel xml parsing library that traverse xml nodes. The bug here is that
both iks_child() and iks_next() will return the next iks_struct node
*regardless* of type. chan_gtalk expects the next node to be of type IKS_TAG,
which in most cases, it is, but in this case (a call being made from the
Empathy IM client), there exists iks_struct nodes which are not IKS_TAG data
(they are extraneous whitespaces), and chan_gtalk doesn't handle that case,
so capabilities don't match, and a call cannot be made.
iks_first_tag() and iks_next_tag(), on the other hand, will not return the
very next iks_struct, but will check to see if the next iks_struct is of
type IKS_TAG. If it isn't, it will be skipped, and the next struct of type
IKS_TAG it finds will be returned. This assures that chan_gtalk will find
the iks_struct it is looking for.
This fix simply changes all calls to iks_child() and iks_next() to become
calls to iks_first_tag() and iks_next_tag(), which resolves the capability
matching.
The following is a payload listing from Empathy, which, due to the extraneous
whitespace, will not be parsed correctly by iksemel:
<iq from='dbrooksjab@235-22-24-10/Telepathy' to='astjab@235-22-24-10/asterisk' type='set' id='542757715704'> <session xmlns='http://www.google.com/session' initiator='dbrooksjab@235-22-24-10/Telepathy' type='initiate' id='1837267342'> <description xmlns='http://www.google.com/session/phone'> <payload-type clockrate='16000' name='speex' id='96'/>
<payload-type clockrate='8000' name='PCMA' id='8'/>
<payload-type clockrate='8000' name='PCMU' id='0'/>
<payload-type clockrate='90000' name='MPA' id='97'/>
<payload-type clockrate='16000' name='SIREN' id='98'/>
<payload-type clockrate='8000' name='telephone-event' id='99'/>
</description>
</session>
</iq>
Review: http://reviewboard.digium.com/r/181/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r185122 | rmudgett | 2009-03-30 15:41:24 -0500 (Mon, 30 Mar 2009) | 26 lines
Merged revisions 185120 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185120 | rmudgett | 2009-03-30 15:38:11 -0500 (Mon, 30 Mar 2009) | 19 lines
Make chan_misdn BRI TE side normally defer channel selection to the NT side.
Channel allocation collisions are not handled by chan_misdn very well.
This patch simply avoids the problem for BRI only.
For PRI, allocation collisions are still possible but less likely since
there are simply more channels available and each end could use a different
allocation strategy.
misdn.conf options available:
te_choose_channel - Use to force the TE side to allocate channels.
method - Specify the channel allocation strategy.
(closes issue #13488)
Reported by: Christian_Pinedo
Patches:
isdn_lib.patch.txt uploaded by crich
Tested by: crich, siepkes, festr
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@185126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184948 | file | 2009-03-30 11:37:47 -0300 (Mon, 30 Mar 2009) | 21 lines
Merged revisions 184947 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184947 | file | 2009-03-30 11:35:47 -0300 (Mon, 30 Mar 2009) | 14 lines
Improve our handling of T38 in the initial INVITE from a device.
We now answer with matching media streams to what is requested. If an INVITE
is received with both a T38 and RTP media stream this means we answer with both.
For any outgoing calls created as a result of this inbound one no T38 is requested
in the initial INVITE. Instead if we start receiving udptl packets we trigger a
reinvite on the outbound side.
(closes issue #12437)
Reported by: marsosa
Tested by: pinga-fogo, okrief, file, afu
Review: http://reviewboard.digium.com/r/208/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184838 | russell | 2009-03-29 00:32:04 -0500 (Sun, 29 Mar 2009) | 8 lines
Simplify chan_h323 build to not require a second run of "make".
(closes issue #14715)
Reported by: jthurman
Patches:
h323-makefile-1.6.2.0-beta1.patch uploaded by jthurman (license 614)
Tested by: tzafrir, russell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184840 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184762 | kpfleming | 2009-03-27 14:10:32 -0500 (Fri, 27 Mar 2009) | 12 lines
Improve timing interface to remember which provider provided a timer
The ability to load/unload timing interfaces is nice, but it means that when a timer is allocated, it may come from provider A, but later provider B becomes the 'preferred' provider. If this happens, all timer API calls on the timer that was provided by provider A will actually be handed to provider B, which will say WTF and return an error.
This patch changes the timer API to include a pointer to the provider of the timer handle so that future operations on the timer will be forwarded to the proper provider.
(closes issue #14697)
Reported by: moy
Review: http://reviewboard.digium.com/r/211/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r184566 | file | 2009-03-27 10:15:26 -0300 (Fri, 27 Mar 2009) | 16 lines
Merged revisions 184565 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r184565 | file | 2009-03-27 10:06:45 -0300 (Fri, 27 Mar 2009) | 9 lines
Fix an issue where nat=yes would not always take effect for the RTP session on outgoing calls.
If calls were placed using an IP address or hostname the global nat setting was copied over
but was not set on the RTP session itself. This caused the RTP stack to not perform symmetric RTP
actions.
(closes issue #14546)
Reported by: acunningham
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184339 | russell | 2009-03-25 16:57:19 -0500 (Wed, 25 Mar 2009) | 35 lines
Improve performance of the ast_event cache functionality.
This code comes from svn/asterisk/team/russell/event_performance/.
Here is a summary of the changes that have been made, in order of both
invasiveness and performance impact, from smallest to largest.
1) Asterisk 1.6.1 introduces some additional logic to be able to handle
distributed device state. This functionality comes at a cost.
One relatively minor change in this patch is that the extra processing
required for distributed device state is now completely bypassed if
it's not needed.
2) One of the things that I noticed when profiling this code was that a
_lot_ of time was spent doing string comparisons. I changed the way
strings are represented in an event to include a hash value at the front.
So, before doing a string comparison, we do an integer comparison on the
hash.
3) Finally, the code that handles the event cache has been re-written.
I tried to do this in a such a way that it had minimal impact on the API.
I did have to change one API call, though - ast_event_queue_and_cache().
However, the way it works now is nicer, IMO. Each type of event that
can be cached (MWI, device state) has its own hash table and rules for
hashing and comparing objects. This by far made the biggest impact on
performance.
For additional details regarding this code and how it was tested, please see the
review request.
(closes issue #14738)
Reported by: russell
Review: http://reviewboard.digium.com/r/205/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184280 | file | 2009-03-25 16:22:06 -0300 (Wed, 25 Mar 2009) | 5 lines
Fix issue with a T38 reinvite being sent even if not configured to do so.
If we receive a T38 request negotiate control frame we should only attempt to do so
if the option is enabled on the dialog.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184037 | russell | 2009-03-24 16:40:44 -0500 (Tue, 24 Mar 2009) | 6 lines
Exclude slin16, siren7, and siren14 from bandwidth=low and =medium
The default codec configuration for chan_iax2 is bandwidth=low. I noticed
slin16 being negotiated as the codec in some test calls, but that no longer
happens after this change.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r183117 | mmichelson | 2009-03-19 11:07:54 -0500 (Thu, 19 Mar 2009) | 20 lines
Merged revisions 183115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183115 | mmichelson | 2009-03-19 11:04:02 -0500 (Thu, 19 Mar 2009) | 14 lines
Fix an issue where cancelled outgoing SIP calls would erroneously report the device as "in use."
A user was having an issue where if an outgoing SIP call was canceled, the SIP device
would remain in use if we had not received any response to the initial INVITE we sent out.
The SIP device would remain in use until the autocongestion timer was exhausted.
I tracked down the cause of this to be the section of code I am removing here. I asked several
people what the purpose of this code was meant to be, but no one could give me any sort of
answer as to why this was here. The person who was having this issue has been using this patch
for several months and it has stopped the problems they have had.
AST-196
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@183121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r183108 | file | 2009-03-19 12:37:23 -0300 (Thu, 19 Mar 2009) | 11 lines
Improve our triggering of a T38 switchover internally when triggered by a received reinvite.
Previously we reached across the channel bridge to get the other party's SIP dialog
structure in order to trigger an outgoing reinvite. This is extremely dangerous to do
and only works if bridged to another SIP channel. This patch changes this to use the
T38 control frame method of requesting a switchover. This change also causes the SIP
channel driver to propogate back whether the switchover worked or not instead of blindly
accepting the incoming T38 reinvite.
Review: http://reviewboard.digium.com/r/200/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@183110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182847 | russell | 2009-03-17 21:28:55 -0500 (Tue, 17 Mar 2009) | 52 lines
Merged revisions 182810 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@182946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182722 | jpeeler | 2009-03-17 15:47:31 -0500 (Tue, 17 Mar 2009) | 15 lines
Allow H.323 Plus library to be used in addition to the OpenH323 library
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
(closes issue #11261)
Reported by: vhatz
Patches:
asterisk-1.6.0.6-h323plus.patch uploaded by jthurman (license 614)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@182724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182282 | dvossel | 2009-03-16 12:49:58 -0500 (Mon, 16 Mar 2009) | 13 lines
Merged revisions 182281 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182281 | dvossel | 2009-03-16 12:47:42 -0500 (Mon, 16 Mar 2009) | 7 lines
Randomize IAX2 encryption padding
The 16-32 byte random padding at the beginning of an encrypted IAX2 frame turns out to not be all that random at all. This patch calls ast_random to fill the padding buffer with random data. The padding is randomized at the beginning of every encrypted call and for every encrypted retransmit frame.
Review: http://reviewboard.digium.com/r/193/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@182284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182211 | tilghman | 2009-03-16 10:50:55 -0500 (Mon, 16 Mar 2009) | 14 lines
Merged revisions 182208 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182208 | tilghman | 2009-03-16 10:39:15 -0500 (Mon, 16 Mar 2009) | 7 lines
Fixup glare detection, to fix a memory leak of a local pvt structure.
(closes issue #14656)
Reported by: caspy
Patches:
20090313__bug14656__2.diff.txt uploaded by tilghman (license 14)
Tested by: caspy
........
................
r182278 | tilghman | 2009-03-16 12:33:38 -0500 (Mon, 16 Mar 2009) | 7 lines
Fix an off-by-one error in the FILE() function, and extend FILE()'s length parameter to work like variable substitution.
Previously, FILE() returned one less character than specified, due to the
terminating NULL. Both the offset and length parameters now behave
identically to the way variable substitution offsets and lengths also work.
(closes issue #14670)
Reported by: BMC
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@182280 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182022 | file | 2009-03-13 14:25:09 -0300 (Fri, 13 Mar 2009) | 7 lines
Fix an issue with requesting a T38 reinvite before the call is answered.
The code responsible for sending the T38 reinvite did not check if an INVITE was
already being handled. This caused things to get confused and the call to fail.
The code now defers sending the T38 reinvite until the current INVITE is done being
handled.
(issue AST-191)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@182042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181769 | mmichelson | 2009-03-12 13:30:58 -0500 (Thu, 12 Mar 2009) | 28 lines
Merged revisions 181768 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181768 | mmichelson | 2009-03-12 13:29:48 -0500 (Thu, 12 Mar 2009) | 22 lines
Properly send a 487 on an INVITE we have not responded to if we receive a BYE.
If we receive an INVITE from an endpoint and then later receive a BYE from that
same endpoint before we have sent a final response for the INVITE, then we need
to respond to the INVITE with a 487.
There was logic in the code prior to this commit which seemed to exist solely to
handle this situation, but there was one condition in an if statement which
was incorrect. The only way we would send a 487 was if the sip_pvt had no owner
channel. This made no sense since we created the owner channel when we received
the INVITE, meaning that the majority of the time we would never send the 487.
The 487 being sent should not rely on whether we have created a channel. Its
delivery should be dependent on the current state of the initial INVITE transaction.
With this commit, that logic is now correctly in place.
(closes issue #14149)
Reported by: legranjl
Patches:
14149.patch uploaded by mmichelson (license 60)
Tested by: legranjl
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@181771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181371 | dvossel | 2009-03-11 12:34:57 -0500 (Wed, 11 Mar 2009) | 17 lines
Merged revisions 181340 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181340 | dvossel | 2009-03-11 12:25:31 -0500 (Wed, 11 Mar 2009) | 11 lines
encrypted IAX2 during packet loss causes decryption to fail on retransmitted frames
If an iax channel is encrypted, and a retransmit frame is sent, that packet's iseqno is updated while it is encrypted. This causes the entire frame to be corrupted. When the corrupted frame is sent, the other side decrypts it and sends a VNAK back because the decrypted frame doesn't make any sense. When we get the VNAK, we look through the sent queue and send the same corrupted frame causing a loop. To fix this, encrypted frames requiring retransmission are decrypted, updated, then re-encrypted. Since key-rotation may change the key held by the pvt struct, the keys used for encryption/decryption are held within the iax_frame to guarantee they remain correct.
(closes issue #14607)
Reported by: stevenla
Tested by: dvossel
Review: http://reviewboard.digium.com/r/192/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@181373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181345 | file | 2009-03-11 14:26:40 -0300 (Wed, 11 Mar 2009) | 21 lines
Merged revisions 181328 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181328 | file | 2009-03-11 14:22:52 -0300 (Wed, 11 Mar 2009) | 14 lines
Fix issue where an attended transfer could not be completed under a rare scenario.
When completing an attended transfer chan_sip does a check to make sure the extension
in the URI portion of the Refer-To header is a local valid extension. We don't actually
need to check this since we know for sure the other channel is already up and talking to
the extension. Some devices do not put the extension in the Refer-To header either, which
can cause the extension check to fail. We now no longer do this check if it is an attended
transfer.
(closes issue #14628)
Reported by: sverre
Patches:
14628.diff uploaded by file (license 11)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@181359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181296 | file | 2009-03-11 13:40:48 -0300 (Wed, 11 Mar 2009) | 16 lines
Merged revisions 181295 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181295 | file | 2009-03-11 13:36:50 -0300 (Wed, 11 Mar 2009) | 9 lines
Fix a problem with inband DTMF detection on outgoing SIP calls when dtmfmode=auto.
When dtmfmode was set to auto the inband DTMF detector was not setup
on outgoing SIP calls. This caused inband DTMF detection to fail.
The inband DTMF detector is now setup for both dtmfmode inband and auto.
(closes issue #13713)
Reported by: makoto
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@181298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r181135 | jpeeler | 2009-03-10 23:06:44 -0500 (Tue, 10 Mar 2009) | 20 lines
Fix malloc debug macros to work properly with h323.
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue.
A few other issues were addressed:
- There were a few instances of functions improperly passing ast_free instead
of ast_free_ptr.
- Some clean up was done to avoid the debug macros intentionally being redefined.
(copied below from Kevin's commit, appreciate the help)
- disable astmm.h from doing anything when STANDALONE is defined, which is used
by the tools in the utils/ directory that use parts of Asterisk header files in
hackish ways; also ensure that utils/extconf.c and utils/conf2ael.c are
compiled with STANDALONE defined.
(closes issue #13593)
Reported by: pj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@181199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r180261 | russell | 2009-03-04 15:01:05 -0600 (Wed, 04 Mar 2009) | 54 lines
Resolve object matching issues related to the removal of the sip_user object.
Previously, chan_sip had both sip_peer and sip_user objects in memory. A
patch went in to remove sip_user to simplify the code, since everything
could be done with just sip_peer. This patch resolves some regressions
found that were introduced by those changes.
This code comes from svn/asterisk/team/group/sip-object-matching/.
Here is a list of the changes that have been made:
1) When doing a match by name with the find_peer() function, make it much
easier to specify which objects should be matched by having a parameter
that specifies exactly which object types should be considered. Also,
update find_by_name() to handle this parameter. Finally, update all
code to use the new option values.
2) When looking up an object for an outbound request by name, consider
peers only. (create_addr())
3) Only match peers on an incoming registration request.
4) When doing authentication (except for SUBSCRIBE), look up users
by name, instead of all objects by name.
5) When doing authentication (except for SUBSCRIBE), after looking for
a user by name, look for a peer by IP address, instead of all objects
by IP address.
6) When handling the SIP qualify CLI command or manager action, look for
a peer by name, instead of any object by name.
7) When handling the SIP unregister CLI command, look for a peer by name,
instead of any object by name.
9) In sip_do_debug_peer(), search for a peer by name, instead of any object
by name.
9) When handling the SIPPEER() dialplan function, search for a peer by name,
instead of any object by name.
10) In the following session timer related functions, st_get_se(),
st_get_refresher(), and st_get_mode(), when looking for an object for a
given sip_pvt using pvt->peername, look for a peer by name, instead of any
object by name.
11) Fix build_peer() to properly handle the case where separate type=peer and
type=user entries were specified in sip.conf.
(closes issue #14505)
Reported by: lmadsen
Review: http://reviewboard.digium.com/r/172/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@180263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r179219 | mmichelson | 2009-03-01 15:45:08 -0600 (Sun, 01 Mar 2009) | 18 lines
Properly free memory and remove scheduler entries when a transmission failure occurs.
Previously, only the "data" field of the sip_pkt created during __sip_reliable_xmit
was freed when XMIT_ERROR was returned by __sip_xmit. When retrans_pkt was called,
this inevitably resulted in the reading and writing of freed memory.
XMIT_ERROR is a condition meaning that we don't want to attempt resending the packet
at all. The proper action to take is to remove the scheduler entry we just created,
free the packet's data as well as the packet itself, and unlink it from the list of
packets on the sip_pvt structure.
(closes issue #14455)
Reported by: Nick_Lewis
Patches:
14455.patch uploaded by mmichelson (license 60)
Tested by: Nick_Lewis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@179221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
