Implement the ast_get_tid() function for NetBSD system. NetBSD supports
getting the TID via _lwp_self().
ASTERISK-29850
Change-Id: If57fd3f9ea15ef5d010bfbdcbbbae9b379f72f8c
A regression was introduced in ASTERISK~29531 that caused 'say'
functions to fail with file lists that would previously have
succeeded. This caused affected channels to hang up where previously
they would have continued.
We now explicitly check for the empty string to restore the previous
behavior.
ASTERISK-29859 #close
Change-Id: Ia2e5769868e2792313c2d7c07996efe009c6f8d5
Every config variable in the directories
section of asterisk.conf currently has a
counterpart built-in variable containing
the value of the config option, except
for the last one, astsbindir, which should
have an ASTSBINDIR variable.
However, the actual corresponding ASTSBINDIR
variable is missing in pbx_variables.c.
This adds the missing variable so that all
the config options have their corresponding
variable.
ASTERISK-29847 #close
Change-Id: I36006faf471825b36ebc8aa5e87a3bcb38d446fc
gethostbyname() and gethostbyname_r() are deprecated in favor of
getaddrinfo() which we use in the ast_sockaddr family of functions.
ASTERISK-29819 #close
Change-Id: Ie277c0ef768d753b169c121ef570a71665692ab7
Adds the macro DTMF_MATRIX_SIZE to replace
the magic number 4 sprinkled throughout
dsp.c.
ASTERISK-29815 #close
Change-Id: Ie3bddb92c6b16204ece0f758009e9490eb33b9ba
Adds a command to the CLI to unload and then
load a module. This makes it easier to perform
these operations which are often done
subsequently to load a new version of a module.
"module reload" already refers to reloading of
configuration, so the name "refresh" is chosen
instead.
ASTERISK-29807 #close
Change-Id: I595f6f11774a0de2565a1fba38da22309ce93a2c
Adds missing documentation for some channel,
bridge, and queue events.
ASTERISK-24427
ASTERISK-29515
Change-Id: I92b06b88c8cadc0155f95ebe3e870b3e795a8c64
The current TCP client connect code, blocks and does not handle EINTR
error case.
This patch makes the client socket non-blocking while connecting,
ensures a connect does not immediately fail due to EINTR "errors",
and adds a connect timeout option.
The original client start call sets the new timeout option to
"infinite", thus making sure old, orginal behavior is retained.
ASTERISK-29746 #close
Change-Id: I907571843a83e43c0742b95a64785f4411f02671
Adds tech-agnostic support for SF signaling
by adding SF sender and receiver applications
as well as Dial integration.
ASTERISK-29802 #close
Change-Id: I7ec50752e9a661af639425e5d1e339f17411bcad
SayAlpha, SayAlphaCase, SayDigits, SayMoney, SayNumber, SayOrdinal,
and SayPhonetic all claim to allow DTMF interruption if the
SAY_DTMF_INTERRUPT channel variable is set to a truthy value, but we
are failing to break out of a given 'say' application if DTMF actually
occurs.
ASTERISK-29816 #close
Change-Id: I6a96e0130560831d2cb45164919862b9bcb6287e
It's not safe to keep the channel locked while locking
the peer Local channel, as it can result in a deadlock.
This change unlocks it during this time but keeps the
bridge locked to ensure nothing changes about the bridge.
ASTERISK-29821
Change-Id: Ib68eb7037e5a479bcc2aceee77337cdde1fbdde6
The variable cp4 in a variable substitution function
can potentially be used without being initialized
currently. This causes Asterisk to no longer compile.
This initializes cp4 to NULL to make the compiler
happy.
ASTERISK-29803 #close
Change-Id: I392579cbb76db2795d5820c9427cf55fbcee9e72
Previously, it was only possible to have one HTTP server in Asterisk.
With this patch it is now possible to have multiple HTTP servers
listening on different addresses.
Note, this behavior has only been made available through an API call
from within the TEST_FRAMEWORK. Specifically, this feature has been
added in order to allow unit test to create/start and stop servers,
if one has not been enabled through configuration.
Change-Id: Ic5fb5f11e62c019a1c51310f4667b32a4dae52f5
Currently, Asterisk doesn't throw warnings if options
are passed into applications that don't accept them.
This can confuse users if they're unaware that they
are doing something wrong.
This adds an additional check to parse_options so that
a warning is thrown anytime an option is parsed that
doesn't exist in the parsing application, so that users
are notified of the invalid usage.
ASTERISK-29801 #close
Change-Id: Id029274a57135caca193c913307a63fd75e24679
Currently MSet can only parse a maximum of 24 variables.
If more variables are provided to MSet, the 24th variable
will simply contain the remainder of the string and the
remaining variables thereafter will never get set.
This increases the number of variables that can be parsed
in one go from 24 to 99. Additionally, documentation is added
since this limitation is currently undocumented and is
confusing to users who encounter this limitation.
ASTERISK-29766 #close
Change-Id: I3fe35b462dedec0a452fd9ea7f92c920a3939f16
Currently, variable substitution involving dialplan
extensions is quite clunky since it entails obtaining
the current dialplan location, backing it up, storing
the desired variables for substitution on the channel,
performing substitution, then restoring the original
location.
In addition to being clunky, things could also go wrong
if an async goto were to occur and change the dialplan
location during a substitution.
Fundamentally, there's no reason it needs to be done this
way, so new API is added to allow for directly passing in
the dialplan location for the purposes of variable
substitution so we don't need to mess with the channel
information anymore. Existing API is not changed.
ASTERISK-29745 #close
Change-Id: I23273bf27fa0efb64a606eebf9aa8e2f41a065e4
Adds tech-agnostic support for MF signaling by adding
MF sender and receiver applications as well as Dial
integration.
ASTERISK-29496-mf #do-not-close
Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4
We know that passing a NULL or empty argument to
ast_channel_get_by_name() will never result in a matching channel and
will always result in an error being emitted, so just short-circuit
out in that case.
ASTERISK-28219 #close
Change-Id: I88eadc748e9c6996fc17467b0a05881bbfd00bce
Since Doxygen 1.8.16, a special comment block is required. Otherwise
(pure C comment), the group command is ignored. Additionally, several
unbalanced group commands were fixed.
ASTERISK-29732
Change-Id: I4687857b9d56e6f44fd440b73af156691660202e
A backend's implementation of the realtime 'require' function may call
va_arg() and then fail, leaving the va_list in an undefined
state. Pass a copy of the va_list instead.
ASTERISK-29771 #close
Change-Id: I555565a72af84e96d49f62fe8cb66ba5a78461f4
Refactors generic functions used for email generation
into utils.c so that they can be used by multiple
modules, including app_voicemail and app_minivm,
to avoid code duplication.
ASTERISK-29715 #close
Change-Id: I1de0ed3483623e9599711129edc817c45ad237ee
In the AO2_ALLOC_OPT_LOCK_NOLOCK case the referenced obj
structure is freed, but is then referenced later if ref_log is
enabled. The change is to store the obj->priv_data.options value
locally and reference it instead of the value from the freed obj
ASTERISK-29730
Change-Id: I60cc5dc1f5a4330e7ad56976fc38a42de0ab6072
Local channels are made up of two pairs - the 1 and 2
sides. When a frame goes in one side, it comes out the
other. Back and forth. When both halves are in a
bridge this creates an infinite loop of frames.
This change makes it so that bridging no longer
allows both of these sides to exist in the same
bridge.
ASTERISK-29748
Change-Id: I29928b6de87cd9be996a77daccefd7c360fef651
Fixes four misuses of the parameter 'name'. Additionally, for
consistency and to avoid such an issue in future, those few other
places, which used '\file name', were changed just to '\file'. Then,
Doxygen uses the name of the current file.
ASTERISK-29733
Change-Id: I0c18b4c863c6988b138c77448057349a9ee7052d
Currently, when the t option is specified with no arguments,
the # character is still treated as a terminator, even though
no character should be treated as a terminator.
This is because a previous regression fix was modified to
remove the use of NULL as a default altogether. However,
NULL and an empty string actually refer to different
arrangements and should be treated differently. NULL is the
default terminator (#), while an empty string removes the
terminator altogether. This is the behavior being used by
the rest of the core.
Additionally, since S_OR catches empty strings as well as
NULL (not intended), this is changed to a ternary operator
instead, which fixes the behavior.
ASTERISK-29705 #close
Change-Id: I9b6b72196dd04f5b1e0ab5aa1b0adf627725e086
When reloading dialplan, hints created dynamically would lose any dash
characters. Now we ignore those dashes if we are dealing with a hint
during a reload.
ASTERISK-28040 #close
Change-Id: I95e48f5a268efa3c6840ab69798525d3dce91636
* Initialize some variables that are never used anyway.
* Use valid pointers instead of integers cast to void pointers when
calling pthread_setspecific().
ASTERISK-29711 #close
ASTERISK-29713 #close
Change-Id: I8728cd6f2f4b28e0e48113c5da450b768c2a6683
Add a function to check if there is an exact match a one string between
delimiters in another string.
Add a function that will create an ast_json object out of a list of
Asterisk variables. An excludes string can also optionally be passed
in.
Also, add a macro to make it easier to get object integers.
Change-Id: I5f34f18e102126aef3997f19a553a266d70d6226
Some ast_stun_request users do not provide a destination address when
sending to a connection-mode socket.
ASTERISK-29691
Change-Id: Idd9114c3380216ba48abfc3c68619e79ad37defc
The current versions do not support future dates in all say application when using the 'Q' or 'q' format parameter and says "today" for everything that is greater than today
ASTERISK-29637
Change-Id: I1fb1cef0ce3c18d87b1fc94ea309d13bc344af02
The MessageSend AMI action has been updated to allow the Destination
and the To addresses to be provided separately. This brings the
MessageSend manager command in line with the capabilities of the
MessageSend dialplan application.
ASTERISK-29663 #close
Change-Id: I8513168d3e189a9fed88aaab6f5547ccb50d332c
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.
This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.
Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.
ASTERISK-29531
Change-Id: If9718c89353b8e153d84add3cc4637b79585db19
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
ncurses 6.1 introduced an extended number format for terminfo files
which the terminfo parsing in Asterisk is not able to parse. This
results in some TERM values that do support color (screen-256color on
Ubuntu 20.04 for example) to not get a color console.
ASTERISK-29630 #close
Change-Id: I27a4fcfab502219924af2d6b1c46feba92903cb3
IPv6 nameserver addresses are stored in different part of the
__res_state structure, so look there if we appear to have support for
it.
ASTERISK-28004 #close
Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d
