Due to the serialized architecture of chan_pjsip there exists a race condition where a CANCEL may
be received and processed before responses (such as 180 Ringing, 183 Session Progress, and 200 OK)
are sent. Since the session is in an unexpected state PJSIP will assert when this is attempted.
This change makes it so that these responses are not sent on disconnected sessions.
ASTERISK-24471 #close
Reported by: yaron nahum
........
Merged revisions 428301 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For chan_motif the direct return value of the underlying config options framework
was passed back. This can relay various states which the module loader would not
interpet as success. It has been changed so only on errors will it report back
an error.
For chan_pjsip the code implemented a dummy reload function which always
returned an error. This has been removed as all configuration is held within
res_pjsip instead.
ASTERISK-23651 #close
Reported by: Rusty Newton
........
Merged revisions 427981 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r227276, a while loop was turned into a for loop. Unfortunately, a portion
of the while loop was left in the code such that, when a static gateway is
encountered in the list of MGCP gateways, the next gateway would be skipped.
At best, we would simply flip past a gateway; at worst, this could lead to a
crash.
ASTERISK-24500 #close
Reported by: Xavier Hienne
patches:
chan_mgcp.patch uploaded by Xavier Hienne (License 6657)
........
Merged revisions 427613 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 427614 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r426594 was made, it did not take into account a unit test that verified
that the function properly populated the unsupported buffer. The function
would previously memset the buffer if it detected it had any contents; since
this function can now be called iteratively on successive headers, the unit
tests would now fail. This patch updates the unit tests to reset the buffer
themselves between successive calls, and updates the documentation of the
function to note that this is now required.
........
Merged revisions 426858 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 426860 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 426863 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The outboundproxy setting is currently ignored when sending OPTIONS requests
as a result of the qualify setting. This means that if an Asterisk server is
unable to send the packet directly to a peer, it is unable to qualify any
non-inbound registered peer (e.g. a peer SIP Trunk).
This patch grabs the outboundproxy information for a peer when a qualify
attempt is being constructed and, if it finds the information, uses it
when sending the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/3948
ASTERISK-24063 #close
Reported by: Damian Ivereigh
patches:
outboundproxy-dai.patch uploaded by Damian Ivereigh (License 6632)
........
Merged revisions 425818 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 425819 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 425820 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Calling PJSIP_MEDIA_OFFER on a non-PJSIP channel is hazardous to your health.
It will treat the channels as a PJSIP channel, eventually hitting an ao2 error,
FRACKing on assertion error, and quite likely crashing.
This patch adds checks to the read/write callbacks that ensure that the channel
technology is of type 'PJSIP' before attempting to operate on the channel.
#SIPit31
ASTERISK-24382 #close
Reported by: Matt Jordan
........
Merged revisions 424621 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Performing a directed call pickup resulted in a deadlock when PJSIP
channels were involved.
A masquerade needs to hold onto the channel locks while it swaps channel
information between the two channels involved in the masquerade. With
PJSIP channels, the fixup routine needed to push a fixup task onto the
PJSIP channel's serializer. Unfortunately, if the serializer was also
processing a task that needed to lock the channel, you get deadlock.
* Added a new control frame that is used to notify the channels that a
masquerade is about to start and when it has completed.
* Added the ability to query taskprocessors if the current thread is the
taskprocessor thread.
* Added the ability to suspend/unsuspend the PJSIP serializer thread so a
masquerade could fixup the PJSIP channel without using the serializer.
ASTERISK-24356 #close
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/4034/
........
Merged revisions 424471 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are certain situations which no checks existed for which need to prevent
session refreshes. This includes sending a session refresh with SDP before SDP
negotiation has completed and sending a session refresh before the dialog itself
has been established. Checks for these have been added.
Additionally COLP related UPDATEs were including SDP when it is not needed.
Review: https://reviewboard.asterisk.org/r/4008/
........
Merged revisions 424056 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outgoing PJSIP calls can result in non-negotiated formats listed in the
channel's native formats if video formats are listed in the endpoint's
configuration. The resulting call could then use a non-negotiated format
resulting in one way audio.
* Simplified the update of session->req_caps in set_caps(). Why do
something in five steps when only one is needed?
AFS-162 #close
Review: https://reviewboard.asterisk.org/r/4000/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Testsuite tests will occasionally fail because on reception of a 200 OK SIP response,
an AST_CONTROL_ANSWER frame is queued prior to when media has finished being
negotiated. This is because session supplements are called into before PJSIP's
inv_session code has told us that media has been updated. Sometimes the queued answer
frame is handled by the PBX thread before the ensuing media negotiations occur, causing
a test failure.
As it turns out, there is another place that session supplements could be called into, which is
after media has finished getting negotiated. What this commit introduces is a means for session
supplements to indicate when they wish to be called into when handling an incoming SIP response.
By default, all session supplements will be run at the same point that they were prior to this
commit. However, session supplements may indicate that they wish to be handled earlier than
normal on redirects, or they may indicate they wish to be handled after media has been negotiated.
In this changeset, two session supplements have been updated to indicate a preference for when
they should be run: res_pjsip_diversion executes before handling redirection in order to get
information from the Diversion header, and chan_pjsip now handles responses to INVITEs after
media negotiation to fix the race condition mentioned previously.
ASTERISK-24212 #close
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/3930
........
Merged revisions 422536 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@422542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reporter on the issue found some issues when upgrading from version 10 to 11
on 55 hosts.
Two situations that can occur with dynamic registrations.
1. With dnsmgr disabled, if the host is not resolvable we are not trying to
resolve the host again when it is time to attempt to register again. This
results in never registering to the host.
2. With dnsmgr enabled, when the host is temporarily not resolvable the
address is set to 0.0.0.0:0 and then when the host is resolvable the port
is not being restored and stays set to 0.
This patch resolves these two issues by:
* Storing the hostname so that it can be used for resolving with DNS.
* Resolve the hostname on the next scheduled attempt to register.
* Storing the port used to reach the host so that when the hostname is
resolvable again, we can set the port again if the port is still unset after
looking up the host.
ASTERISK-23767 #close
Reported by: David Herselman
Tested by: David Herselman, Michael L. Young
Patches:
asterisk-23767-dns_reg_retry_and_set_port_11_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3856/
........
Merged revisions 422274 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 422275 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@422276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code originally worked around an issue within res_rtp_asterisk itself.
The wrong socket was being used for the STUN check for RTCP, causing the
port to be the same as RTP. This was subsequently fixed and the RTCP port
provided for the ICE candidate is correct and does not need to be incremented.
ASTERISK-23997 #close
Reported by: Badalian Vyacheslav
Patches:
plus1.diff submitted by Badalian Vyacheslav (license 5249)
........
Merged revisions 421909 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421910 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421911 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a user does not provide a port in the fromdomain setting, chan_sip will set
the fromdomainport to STANDARD_SIP_PORT (5060). The fromdomainport value will
then get used unilaterally in certain places. This causes issues with TLS,
where the default port is expected to be 5061.
This patch modifies chan_sip such that fromdomainport is only used if it is
not the standard SIP port; otherwise, the port from the SIP pvt's recorded
self IP address is used.
Review: https://reviewboard.asterisk.org/r/3893/
ASTERISK-24178 #close
Reported by: Elazar Broad
patches:
fromdomainport_fix.diff uploaded by Elazar Broad (License 5835)
........
Merged revisions 421717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 421718 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 421719 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421645 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for set_var to override certain defaults such as caller ID and codec
values. This also fixes a test suite regression. The "set_var" test suite test attempted
to use set_var to override caller ID, but a recent change caused that to no longer work.
........
Merged revisions 421565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A calls B
B answers
B SIP attended transfers to C
C answers, B and C can see each other's connected line information
B completes the transfer
A has number but no name connected line information about C
while C has the full information about A
I examined the incoming and outgoing party id information handling of
chan_pjsip and found several issues:
* Fixed ast_sip_session_create_outgoing() not setting up the configured
endpoint id as the new channel's caller id. This is why party A got
default connected line information.
* Made update_initial_connected_line() use the channel's CALLERID(id)
information. The core, app_dial, or predial routine may have filled in or
changed the endpoint caller id information.
* Fixed chan_pjsip_new() not setting the full party id information
available on the caller id and ANI party id. This includes the configured
callerid_tag string and other party id fields.
* Fixed accessing channel party id information without the channel lock
held.
* Fixed using the effective connected line id without doing a deep copy
outside of holding the channel lock. Shallow copy string pointers can
become stale if the channel lock is not held.
* Made queue_connected_line_update() also update the channel's
CALLERID(id) information. Moving the channel to another bridge would need
the information there for the new bridge peer.
* Fixed off nominal memory leak in update_incoming_connected_line().
* Added pjsip.conf callerid_tag string to party id information from
enabled trust_inbound endpoint in caller_id_incoming_request().
AFS-98 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3913/
........
Merged revisions 421400 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed the iax.conf bandwidth option. This is the root cause of
ASTERISK-24150.
* Added checks in iax2_request() to ensure that there are actual formats
requested for the new channel to prevent any more fracks from issues like
ASTERISK-24150. This is a consequence of the iax.conf bandwidth option
not working.
* Fixed struct iax2_codec_pref.order member size mismatch issue when
converting to and from the codec preference order list passed over the
wire. In addition the values sent over the wire are now compatible with
previous Asterisk versions.
* Fixed several issues dealing with the struct iax2_codec_pref members.
Off-by-one, array limit errors, and the order/framing members always need
to be updated together.
* Made iax2_request() setup the channel's native format preference order
according to the user's wishes. The new media format strategy needs the
order specified earler.
* Fixed usage of ast_format_compatibility_bitfield2format(). The function
can return NULL if the bitfield was not associated with a function.
* Deleted dead code iax2_codec_pref_getsize() and
iax2_codec_pref_setsize().
* Made iax2_parse_allow_disallow() and iax2_codec_pref_string() call
iax2_codec_pref_to_cap() instead of inlining it.
* Made IAX_CAPABILITY_MEDBANDWIDTH, IAX_CAPABILITY_LOWBANDWIDTH, and
IAX_CAPABILITY_LOWFREE constants again as they were in Asterisk v1.8.
* Renamed prefs to prefs_global so it won't get confused with the local
pref versions.
* Fixed too small buffer in handle_cli_iax2_show_peer().
* Fixed ast_cli() calls in handle_cli_iax2_show_peer() to output complete
lines.
* Changed struct create_addr_info.prefs to be struct iax2_codec_pref as an
optimization so iax2_request() and iax2_call() do less work.
* Fixed a potential deadlock in ast_iax2_new() on an off-nominal path when
the pbx could not get started.
* Made set_config() setup a local prefs list along side the local
capability format bitfield. Once the config is loaded, then the local
copies are put into the global versions.
* Fix unininialized codec_buf in function_iaxpeer().
ASTERISK-24150 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3890/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420364 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
ARI: Add channel technology agnostic out of call text messaging
This patch adds the ability to send and receive text messages from various
technology stacks in Asterisk through ARI. This includes chan_sip (sip),
res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the
endpoints resource, and can be sent directly through that resource, or to a
particular endpoint.
For example, the following would send the message "Hello there" to PJSIP
endpoint alice with a display URI of sip:asterisk@mycooldomain.org:
ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
This is equivalent to the following as well:
ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
Both forms are available for message technologies that allow for arbitrary
destinations, such as chan_sip.
Inbound messages can now be received over ARI as well. An ARI application that
subscribes to endpoints will receive messages from those endpoints:
{
"type": "TextMessageReceived",
"timestamp": "2014-07-12T22:53:13.494-0500",
"endpoint": {
"technology": "PJSIP",
"resource": "alice",
"state": "online",
"channel_ids": []
},
"message": {
"from": "\"alice\" <sip:alice@127.0.0.1>",
"to": "pjsip:asterisk@127.0.0.1",
"body": "Watson, come here.",
"variables": []
},
"application": "testsuite"
}
The above was made possible due to some rather major changes in the message
core. This includes (but is not limited to):
- Users of the message API can now register message handlers. A handler has
two callbacks: one to determine if the handler has a destination for the
message, and another to handle it.
- All dialplan functionality of handling a message was moved into a message
handler provided by the message API.
- Messages can now have the technology/endpoint associated with them.
Various other properties are also now more easily accessible.
- A number of ao2 containers that weren't really needed were replaced with
vectors. Iteration over ao2_containers is expensive and pointless when
the lifetime of things is well defined and the number of things is very
small.
res_stasis now has a new file that makes up its structure, messaging. The
messaging functionality implements a message handler, and passes received
messages that match an interested endpoint over to the app for processing.
Note that inadvertently while testing this, I reproduced ASTERISK-23969.
res_pjsip_messaging was incorrectly parsing out the 'to' field, such that
arbitrary SIP URIs mangled the endpoint lookup. This patch includes the
fix for that as well.
Review: https://reviewboard.asterisk.org/r/3726
ASTERISK-23692 #close
Reported by: Matt Jordan
ASTERISK-23969 #close
Reported by: Andrew Nagy
........
r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines
Remove automerge properties :-(
........
r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines
test_message: Fix strict-aliasing compilation issue
........
Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes
to the RTCP topics in Stasis and receives RTCP information back from the
message bus. It encodes into HEPv3 packets and sends the information to the
res_hep module for transmission.
Using this, someone with a Homer server can get live call quality monitoring
for all RTP-based channels in their Asterisk 12+ systems.
In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and
chan_pjsip that were uncovered by the tests written for the Asterisk Test
Suite. This patch fixes the following:
1) chan_pjsip failed to set its channel unique ids on its RTP instance on
outbound calls. It now does this in the appropriate location, in the
serialized call callback.
2) The rtp_engine was overflowing some values when packed into JSON.
Specifically, some longs and unsigned ints can't be be packed into integer
values, for obvious reasons. Since libjansson only supports integers,
floats, strings, booleans, and objects, we print these values into strings.
3) res_rtp_asterisk had a few problems:
(a) it would emit a source IP address of 0.0.0.0 if bound to that IP
address. We now use ast_find_ourip to get a better IP address, and
properly marshal the result into an ast_strdupa'd string.
(b) Reports can be generated with no report bodies. In particular, this
occurs when a sender is transmitting information to a receiver (who
will send no RTP back to the sender). As such, the sender has no report
body for what it received. We now properly handle this case, and the
sender will emit SR reports with no body. Likewise, if we receive an
RTCP packet with no report body, we will still generate the appropriate
events.
ASTERISK-24119 #close
........
Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
