When the configuration section scheme of chan_dahdi.conf is used (keyword
dahdichan instead of channel) all setvar= options are completely ignored.
No variable defined this way appears in the created DAHDI channels.
* Move the clearing of setvar values to after the deferred processing of
dahdichan.
AST-1378 #close
Reported by: Guenther Kelleter
Patch by: Guenther Kelleter
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@429825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the featdmf signaling mode the incoming MF Caller-ID information is
formatted as follows: *${CALLERID(ani2)}${CALLERID(ani)}#*${EXTEN}#
Rather than discarding the ani2 digits, populate the CALLERID(ani2) value
with what is received instead.
AST-1368 #close
Reported by: Denis Martinez
Patches:
extract_ani2_for_featdmf_v11.patch (license #5621) patch uploaded by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@429783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@429673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously when SRTP was enabled on a channel it was not possible
to switch to T.38 as no crypto attributes would be present.
This change makes it so it is now possible. If a T.38 re-invite
comes in SRTP is terminated since in practice you can't encrypt
a UDPTL stream. Now... if we were doing T.38 over RTP (which
does exist) then we'd have a chance but almost nobody does that so
here we are.
ASTERISK-24449 #close
Reported by: Andreas Steinmetz
patches:
udptl-ignore-srtp-v2.patch submitted by Andreas Steinmetz (license 6523)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@429632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Frames with a payload length of 0 were incorrectly handled in res_http_websocket.
Provided a frame with a payload had been received prior it was possible for a double
free to occur. The realloc operation would succeed (thus freeing the payload) but be
treated as an error. When the session was then torn down the payload would be
freed again causing a crash. The read function now takes this into account.
This change also fixes assumptions made by users of res_http_websocket. There is no
guarantee that a frame received from it will be NULL terminated.
ASTERISK-24472 #close
Reported by: Badalian Vyacheslav
Review: https://reviewboard.asterisk.org/r/4220/
Review: https://reviewboard.asterisk.org/r/4219/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@429270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If transmit_refer is called when p->refer is already allocated,
it leaks the previous allocation. Updated code to always free
previous allocation during a new allocation. Also instead of
checking if we have a previous allocation, always create a
clean record.
ASTERISK-15242 #close
Reported by: David Woolley
Review: https://reviewboard.asterisk.org/r/4160/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@428117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r227276, a while loop was turned into a for loop. Unfortunately, a portion
of the while loop was left in the code such that, when a static gateway is
encountered in the list of MGCP gateways, the next gateway would be skipped.
At best, we would simply flip past a gateway; at worst, this could lead to a
crash.
ASTERISK-24500 #close
Reported by: Xavier Hienne
patches:
chan_mgcp.patch uploaded by Xavier Hienne (License 6657)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@427613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r426594 was made, it did not take into account a unit test that verified
that the function properly populated the unsupported buffer. The function
would previously memset the buffer if it detected it had any contents; since
this function can now be called iteratively on successive headers, the unit
tests would now fail. This patch updates the unit tests to reset the buffer
themselves between successive calls, and updates the documentation of the
function to note that this is now required.
........
Merged revisions 426858 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@426860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The outboundproxy setting is currently ignored when sending OPTIONS requests
as a result of the qualify setting. This means that if an Asterisk server is
unable to send the packet directly to a peer, it is unable to qualify any
non-inbound registered peer (e.g. a peer SIP Trunk).
This patch grabs the outboundproxy information for a peer when a qualify
attempt is being constructed and, if it finds the information, uses it
when sending the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/3948
ASTERISK-24063 #close
Reported by: Damian Ivereigh
patches:
outboundproxy-dai.patch uploaded by Damian Ivereigh (License 6632)
........
Merged revisions 425818 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@425819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a device re-INVITEs at the same time as the dialog is hung up, and
if then the ACK to the re-INVITE never reaches Asterisk, chan_sip would
fail to destroy the dialog after a while. This resulted in (most
prominently) file handle leaks.
(Patch reindented by me.)
ASTERISK-20784 #close
ASTERISK-15879 #close
Reported by: Torrey Searle, Nitesh Bansal
Patches:
reinvite_ack_timeout.patch uploaded by Torrey Searle (License #5334)
patch_asterisk_20784.txt uploaded by Nitesh Bansal (License #6418)
Reviewboard: https://reviewboard.asterisk.org/r/4052/
(testcase can be found at r4051)
........
Merged revisions 425068 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@425069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reporter on the issue found some issues when upgrading from version 10 to 11
on 55 hosts.
Two situations that can occur with dynamic registrations.
1. With dnsmgr disabled, if the host is not resolvable we are not trying to
resolve the host again when it is time to attempt to register again. This
results in never registering to the host.
2. With dnsmgr enabled, when the host is temporarily not resolvable the
address is set to 0.0.0.0:0 and then when the host is resolvable the port
is not being restored and stays set to 0.
This patch resolves these two issues by:
* Storing the hostname so that it can be used for resolving with DNS.
* Resolve the hostname on the next scheduled attempt to register.
* Storing the port used to reach the host so that when the hostname is
resolvable again, we can set the port again if the port is still unset after
looking up the host.
ASTERISK-23767 #close
Reported by: David Herselman
Tested by: David Herselman, Michael L. Young
Patches:
asterisk-23767-dns_reg_retry_and_set_port_11_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3856/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@422274 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code originally worked around an issue within res_rtp_asterisk itself.
The wrong socket was being used for the STUN check for RTCP, causing the
port to be the same as RTP. This was subsequently fixed and the RTCP port
provided for the ICE candidate is correct and does not need to be incremented.
ASTERISK-23997 #close
Reported by: Badalian Vyacheslav
Patches:
plus1.diff submitted by Badalian Vyacheslav (license 5249)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@421909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a user does not provide a port in the fromdomain setting, chan_sip will set
the fromdomainport to STANDARD_SIP_PORT (5060). The fromdomainport value will
then get used unilaterally in certain places. This causes issues with TLS,
where the default port is expected to be 5061.
This patch modifies chan_sip such that fromdomainport is only used if it is
not the standard SIP port; otherwise, the port from the SIP pvt's recorded
self IP address is used.
Review: https://reviewboard.asterisk.org/r/3893/
ASTERISK-24178 #close
Reported by: Elazar Broad
patches:
fromdomainport_fix.diff uploaded by Elazar Broad (License 5835)
........
Merged revisions 421717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@421718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip_subscribe_mwi_destroy calls sip_destroy on the reference counted
mwi->call. This results in the fields of mwi->call being freed, but
mwi->call itself it leaked. If other code is still using mwi->call
it can cause problems. This change uses dialog_unref instead, to
balance the ref provided by sip_alloc().
ASTERISK-24087 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/3834/
........
Merged revisions 419440 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@419441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new inband_on_setup_ack option causes Asterisk to assume inband audio
may be present when a SETUP_ACKNOWLEDGE message is received.
Q.931 Section 5.1.3 says that in scenarios with overlap dialing, when a
dialtone is sent from the network side, progress indicator 8 "Inband info
now available" MAY be sent to the CPE if no digits were received with the
SETUP. It is thus implied that the ie is mandatory if digits came with
the SETUP and dialtone is needed. This option should be enabled, when the
network sends dialtone and you want to hear it, but the network doesn't
send the progress indicator when needed.
NOTE: For Q.SIG setups this option should be enabled when outgoing overlap
dialing is also enabled because Q.SIG does not send the progress indicator
with the SETUP ACK.
The commit -r413714 (AST-1338) which causes this issue was dealing with a
SIP-to-ISDN interoperability issue.
This commit is a merge of the two patches indicated below.
ASTERISK-23897 #close
Reported by: Pavel Troller
Patches:
pri-4.diff (license #6302) patch uploaded by Pavel Troller
jira_asterisk_23897_v11.patch (license #5621) patch uploaded by rmudgett
Review: https://reviewboard.asterisk.org/r/3633/
........
Merged revisions 417956 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip have also been added to allow behavior
to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is essentially a backport of a small portion of r397526 from
ASTERISK-21981. In that patch, pass through support and format attribute
negotiation was added for Opus. Part of that included being more tolerant to
whitespace in the fmtp line of an SDP; that part of the patch is being
applied here.
As the author of the backport pointed out, in SDP, the fmtp line is allowed to
include whitespace between attributes. RFC 3267 chapter 8.3 (from 2001)
includes an example for this. This was not removed in the updated RFC 4867 in
2007.
Review: https://reviewboard.asterisk.org/r/3658
ASTERISK-23916 #close
Reported by: Alexander Traud
patches:
sdpFMTPspace_Asterisk11.patch uploaded by Alexander Traud (License 6520)
........
Merged revisions 417587 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@415854 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk started counting the session timer at INVITE while the other
end correctly started at 200. This meant that for short session-expiries
(90 seconds) combined with long ringing times (e.g. 30 seconds), asterisk
would wrongly assume that the timer was hit before the other end thought
it was time to send a session refresh. This resulted in prematurely
ended calls.
This changes the session timer to start counting first at 200 like RFC
says it should.
(Also removed a few excess NULL checks that would never hit, because if
they did, asterisk would have crashed already.)
ASTERISK-22551 #close
Reported by: i2045
Review: https://reviewboard.asterisk.org/r/3562/
........
Merged revisions 414620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Populate the CALLERID(ani2) value (and the special CALLINGANI2 channel
variable) with the ANI2 value in addition to the PRI specific ANI2 channel
variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
........
Merged revisions 413714 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
