When running valgrind on Asterisk, it complained about:
==32423== Source and destination overlap in memcpy(0x85a920, 0x85a920, 304)
==32423== at 0x4C2F71C: memcpy@@GLIBC_2.14 (in /usr/lib/valgrind/...)
==32423== by 0x55BA91: ast_rtp_engine_unload_format (rtp_engine.c:2292)
==32423== by 0x4EEFB7: ast_format_attr_unreg_interface (format.c:1437)
The code in question is a struct assignment, which may be performed by
memcpy as a compiler optimization. It is changed to only copy the struct
contents if source and destination are different.
ASTERISK-25219 #close
Change-Id: I6d3546c326b03378ca8e9b8cefd41c16e0088b9a
The patch in 0b6410c4f8 did correctly fix a memory leak of the DTLS
structures in the RTP engine. However, when a 'core reload' is issued, a
double free of the memory pointed to by the char *'s in the DTLS
configuration struct can occur, as ast_rtp_dtls_cfg_free does not set
the pointers to NULL when they are freed.
This patch sets those pointers to NULL, preventing a second call to
ast_rtp_dtls_cfg_free from corrupting memory.
ASTERISK-25022
Change-Id: I820471e6070a37e3c26f760118c86770e12f6115
The doxygen for ast_rtp_codecs_payloads_copy() states:
"This copies the payloads from the codecs0 structure to the codecs1
structure, overwriting any current values."
However, in practice, the overwriting of current values was not
happening. Instead, a new RTP codec payload object would be appended to
the codecs1 structure instead of replacing the corresponding object.
This patch corrects this behavior by overwriting the object in the
codecs1 structure if it exists already. If it does not already exist,
then create a new copy and link it in.
Tests of "memory show summary rtp_engine.c" had previously shown
additional allocations being performed any time that Asterisk processed
an incoming SDP. Scenarios involving lots of reinvites resulted in lots
of allocations. With this patch, I can perform as many reinvites as
I want and see no memory increases from the RTP engine.
ASTERISK-24916 #close
Reported by Christophe Osuna
Change-Id: I9a90bc3f564535bc767bf2fc0c455d5f065cea75
ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
The resources are linked into a table, but the original alloc refs
are never released. ast_strdup leak in rtp_engine.c. If
ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
a pointer to an alloc'd string is overwritten before the string is free'd.
ASTERISK-25022
Reported by: one47
Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip have also been added to allow behavior
to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Upon failure of an INVITE transaction meant to initiate a remote native
bridge, rtp_engine.c would not clean up non-reference-counted bridge
instance pointers leaving a dangling pointer which was being used to
perform a local native bridge after the other channel had hung up. This
lead to dereferencing into freed memory and plenty of AO2 errors. This
change allows the remote native bridge loop to clean up properly when
the bridge fails.
(closes issue ASTERISK-23310)
Reported by: Jeremy Laine
........
Merged revisions 409521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@409524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When two RTP channels are in a remote bridge, the remote bridging loop in
rtp_engine will periodically check to see if the two channels can still be
bridged. One of the many things it checks is whether or not the codecs have
changed on the channel. If the codec has changed, it will break out of the
loop to re-determine which type of bridge is appropriate.
In order to perform this check, the ast_rtp_glue virtual table's get_codec
callback is called for each channel. The callback implementations assume
that the channel tech private is valid when called; as such, there has
always been some code in place to check whether or not the channel pvt is
NULL before calling. However, this check is insufficient.
The channels are unlocked during the remote bridging loop. It is possible
for a channel to get masqueraded between the check for the pvt being NULL and
the actual call to get_codec. When this occurs, the callback is called with a
ZOMBIE channel, which now has a NULL pvt. Crash.
While this has always been possible in Asterisk 1.8, it is much more likely to
occur in Asterisk 11 and later versions due to the timing changes that occur
when getting the codec from a channel. Note that this is much more likely to be
reproduced on slow, boggy hardware running Asterisk 11 - but fairly rarely
otherwise.
Also Note: This crash was also caught by the various SIP blind transfer tests,
in addition to the bug report Alec filed.
Review: https://reviewboard.asterisk.org/r/3247/
(closes issue ASTERISK-21737)
Reported by: Alec Davis
Tested by: Alec Davis
........
Merged revisions 409001 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@409002 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk didn't support the dynamic payload change in rtp mapping in the 200
OK response.
Scenario:
Asterisk sends the INVITE proposing alaw and telephone-event, it proposes
rtpmap:101 for telephone-event. Peer responds with 2xx, it answers with
alaw and telephone-event also, but it proposes a different rtpmap number
(rtpmap:103) for telephone-event.
Expected Behaviour:
Asterisk should honour the rtpmapping in the response and send DTMF packets
using 103 as payload type for DTMF.
Actual Behaviour: Asterisk sends DTMF packets using payload type 101.
With this patch asterisk now supports changes that can occur in the rtp mapping
in the response.
(closes issue ASTERISK-23279)
Reported by: NITESH BANSAL
Review: https://reviewboard.asterisk.org/r/3225/
Patches:
dynamic_payload_change.patch uploaded by nbansal (license 6418)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_rtp_instance_make_compatible(), after a failure of
channel tech call get_rtp_info() to return peer_instance,
the null pointer would be passed to ao2_ref, producing an
error that looked like a refernce counting problem but is
not. This patch corrects that and adds helpful LOG_ERROR
messages to indicate which failure path occurred.
(issue AST-1276)
Review: https://reviewboard.asterisk.org/r/3156/
........
Merged revisions 406721 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In function ast_rtp_instance_early _bridge_make_compatible the
use of instance 0/1 as arguments doesn't clearly communicate a
direction that the copying of payloads from the source channel
to the destination channel will occur, making it more probable
to have the arguments to ast_rtp_codecs_payloads_copy() put in
the reverse order. This patch renames the arguments with _dst
and _src suffixes and corrects the copy direction.
(closes issue ASTERISK-21464)
Reported by: Kevin Stewart
Review: https://reviewboard.asterisk.org/r/2894/
........
Merged revisions 402000 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Test shows rtpmap:119 being copied per this change, but is not in sip invite
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous fix still would look in the static_RTP_PT table, which
is inappropriate since we specifically want to find a codec that has
been negotiated.
(closes issue ASTERISK-20296)
reported by NITESH BANSAL
Patches:
codec_negotiation.patch Uploaded by NITESH BANSAL (License #6418)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now
been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan
functions to better facilitate access to the AST_CAUSE translations
for technology-specific cause codes. The HangupCauseClear application
has also been added to remove this data from the channel.
(closes issue SWP-4738)
Review: https://reviewboard.asterisk.org/r/2025/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel drivers that allow native bridging need to handle
AST_CONTROL_PVT_CAUSE_CODE frames and previously did not handle them
properly, usually breaking out of the native bridge. This change
corrects that behavior and exposes the available cause code information
to the dialplan while native bridges are in place. This required
exposing the HANGUPCAUSE hash setter outside of channel.c, so
additional documentation has been added.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When remotely bridging calls with directmedia, Asterisk would check
the address of the peers/users holding directmedia ACLs (set via
directmediapermit/directmediadeny) instead of the bridged peer. This
is similar to r366547, but trunk specific and involves changes to
the rtpengine instead of just chan_sip.
(closes issue AST-876)
review: https://reviewboard.asterisk.org/r/1924/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move debug message in ast_rtp_instance_early_bridge_make_compatible() to
be output when what it states has actually happened.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CHANNEL_DEADLOCK_AVOIDANCE() feature of preserving where the channel
lock was originally obtained is overkill where ast_channel_lock_both() was
inlined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Failing to handle AST_CONTROL_UPDATE_RTP_PEER frames in the local bridge loop
causes the loop to exit prematurely. This causes a variety of negative side
effects, depending on when the loop exits. This patch handles the frame by
essentially swallowing the frame in the local loop, as the current channel
drivers expect the RTP bridge to handle the frame, and, in the case of the
local bridge loop, no additional action is necessary.
(issue ASTERISK-19040)
(issue ASTERISK-19128)
(issue ASTERISK-17725)
(issue ASTERISK-18340)
(closes issue ASTERISK-19095)
Reported by: Stefan Schmidt
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1640/
........
Merged revisions 349339 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349340 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336307 | jrose | 2011-09-16 16:09:20 -0500 (Fri, 16 Sep 2011) | 20 lines
Merged revisions 336294 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336294 | jrose | 2011-09-16 14:53:40 -0500 (Fri, 16 Sep 2011) | 13 lines
Fix bad RTP media bridges in directmedia calls on peers separated by multiple Asterisk nodes.
In a situation involving devices on separate Asterisk trunks, the remote RTP bridge would
break when starting a call with directmedia. This patch queues a new type of control frame
so that our RTP bridge loop can properly detect when these situations occur and check to see
if peers need to be updated in order to send their media to the proper location.
(Closes issue ASTERISK-18340)
Reported by: Thomas Arimont
(Closes issue ASTERISK-17725)
Reported by: kwk
Tested by: twilson, jrose
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.10
................
r328824 | kmoore | 2011-07-19 13:05:21 -0500 (Tue, 19 Jul 2011) | 18 lines
Merged revisions 328823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328823 | kmoore | 2011-07-19 12:57:18 -0500 (Tue, 19 Jul 2011) | 11 lines
RTP bridge away with inband DTMF and feature detection
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
(closes 17237)
Review: https://reviewboard.asterisk.org/r/1302/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321042 | twilson | 2011-05-26 10:29:54 -0700 (Thu, 26 May 2011) | 6 lines
Initialize stack-allocated ast_sockaddrs before use
It is important to always initialize ast_sockaddrs before use--even if they
are passed to ast_sockaddr_copy as the underlying storage could be bigger
than what ends up being copied--leaving part of the data unitialized.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
