Asterisk's build system has a tendency to pass include directives for libraries
to everything compiled within a particular group of source files. This means
we pass the header for libxml2 to things that don't necessarily need it. As a
result, we ignore this particular warning.
Review: https://reviewboard.asterisk.org/r/4545/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4545.patch submitted by dkdegroot (License 6600)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a warning caught by clang, wherein a variable sized struct is
not located at the end of a struct. While the code in question actually
expected this, this is a good warning to watch for. Hence, this patch refactors
the code in question to not have two variable length elements in the same
struct.
Review: https://reviewboard.asterisk.org/r/4530/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4530.patch submitted by dkdegroot (License 6600)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Assigning a variable to itself isn't super useful. However, the WAV format
modules make use of this in order to perform byte endian checks. This patch
works around the warning by only performing the self assignment if we are
going to do more than just assign it to ourselves. Which is odd, but true.
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4544.patch submitted by dkdegroot (License 6600)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433690 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Clang will treat ((a == b)) as a warning, as it reasonably expects that the
developer may have intended to write (a == b) or ((a = b)). This patch cleans
up all instances where equality, not assignment, was intended between two
parantheses.
Review: https://reviewboard.asterisk.org/r/4531/
ASTERISK-24917
Repoted by: dkdegroot
patches:
rb4531.patch submitted by dkdegroot (License 6600)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_iax2, we attempt to assign a -1 to a bitfield. This gets caught by
clang, as it will truncate the -1 to a 1 implicitly.
Instead, we just assign the value a '1'.
Review: https://reviewboard.asterisk.org/r/4537/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4537.patch submitted by dkdegroot (License 6600)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new logger routine ast_log_safe. This routine should be
used for all error messages in code that can be run as a result of ast_log.
ast_log_safe does nothing if run recursively. All error logging in
astobj2.c, strings.c and utils.h have been switched to ast_log_safe.
This required adding support for raw threadstorage. This provides direct
access to the void* pointer in threadstorage. In ast_log_safe, NULL is used
to signify that this thread is not already running ast_log_safe, (void*)1 when
it is already running. This was done since it's critical that ast_log_safe
do nothing that could log during recursion checking.
ASTERISK-24155 #close
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/4502/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add ast_register_cleanup to utils/clicompat.c to deal with
any utils that copy sources from main.
* Asterisk 13+: remove unused variables from core_local.c.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433499 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since 'core stop now' and 'core restart now' do not stop modules,
it is unsafe for most of the core to run cleanups. Originally all
cleanups used ast_register_atexit, and were only changed when it
was shown to be unsafe. ast_register_atexit is now used only when
absolutely required to prevent corruption and close child processes.
Exceptions that need to use ast_register_atexit:
* CDR: Flush records.
* res_musiconhold: Kill external applications.
* AstDB: Close the DB.
* canary_exit: Kill canary process.
ASTERISK-24142 #close
Reported by: David Brillert
ASTERISK-24683 #close
Reported by: Peter Katzmann
ASTERISK-24805 #close
Reported by: Badalian Vyacheslav
ASTERISK-24881 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4500/
Review: https://reviewboard.asterisk.org/r/4501/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Attempting to execute DTMF in a confbridge while file playback (prompt,
announcement, etc) is occurring is not allowed. You have to wait until
the sound file has completed before entering DTMF. This patch fixes it
so that app_confbridge now monitors for dtmf key presses during menu
driven file playback. If a key is pressed playback stops and it executes
the matched menu option.
ASTERISK-24864 #close
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4477/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to a quirk in the configuration handling of res_xmpp, the 'autoregister'
setting was never actually processed. This was due to not properly copying
over the global settings to the client settings when applying the
configuration to the run-time object.
ASTERISK-14233
ASTERISK-24780 #close
Reported by: Simon Arlott
patches:
asterisk-13.1.0-24780 uploaded by Simon Arlott (License 5756)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In versiong 5.5, OpenBSD went to 64-bit time values. This requires a cast to
(long) when printing members of certain time structs.
Review: https://reviewboard.asterisk.org/r/4507
ASTERISK-24879 #close
Reported by: snuffy
Tested by: snuffy
patches:
openbsd-time64.diff uploaded by snuffy (License 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses compilation issues for OpenBSD. Specifically, it
addresses:
* It allows including <sys/vmmeter.h> in asterisk.c
* Provides a needed (size_t) cast in xmldoc.c
In 13+, it also addresses a conditional inclusion in loader.c.
Review: https://reviewboard.asterisk.org/r/4506
ASTERISK-24880 #close
Reported by: snuffy
Tested by: snuffy
patches:
misc-openbsd.diff uploaded by snuffy (License 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r432935 was merged, it did correctly fix a situation where a FILE read
operation on the middle of a file buffer would not read the requested length
in the parameters passed to the FILE function. Unfortunately, it would also
allow the FILE function to append more bytes than what was available in the
buffer if the length exceeded the end of the buffer length.
This patch takes the minimum of the remaining bytes in the buffer along with
the calculated length to append provided by the original patch, and uses
that as the length to append in the return result. This patch also updates
the unit tests with the scenarios that were originally pointed out in
ASTERISK-21765 that the original implementation treated incorrectly.
ASTERISK-21765
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found some memory leaks associated with ast_sockaddr_resolve().
Most of the leaks had already been fixed by earlier memory leak hunt
patches. This patch performs an audit of ast_sockaddr_resolve() and found
one more.
* Fix ast_sockaddr_resolve() memory leak in
apps/app_externalivr.c:app_exec().
* Made main/netsock2.c:ast_sockaddr_resolve() always set the addrs
parameter for safety so the pointer will never be uninitialized on return.
The same goes for res/res_pjsip_acl.c:extract_contact_addr().
Review: https://reviewboard.asterisk.org/r/4509/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@433056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In realtime, it is normal to have a database with both 'allow' and 'disallow'
columns in the schema. It is perfectly valid to have an 'allow' value of
'!all,g722,ulaw,alaw' and no 'disallow' value. Unlike in static conf files,
you can't *not* provide the disallow value. Thus, the empty disallow value
causes a spurious WARNING message, which is kind of annoying.
This patch makes it so that a 'disallow' value with no ... value ... is
ignored. Granted, you can still screw this up as well, as technically
specifying 'disallow=all,!ulaw' allows only ulaw, and then you would have no
'allow' value in your database. But really, why would you do that? WHY?
ASTERISK-16779 #close
Reported by: Atis Lezdins
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432970 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code originally kept a lock held when performing the HTTP
request to ensure that the options provided to curl remain valid.
This doesn't seem to be necessary these days and holding the lock
caused requests to happen sequentially instead of in parallel.
ASTERISK-18708 #close
Reported by: Dave Cabot
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "core set debug channel" CLI command mistakenly had source filenames
added to its tab completion. This occurred because the CLI generator fell back
to the "core set debug" command which permits setting debug at a source
filename level.
ASTERISK-21038 #close
Reported by: Richard Kenner
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The loop that reads in a file was not correctly using the offset when
determining what bytes to append to the output. This patch corrects
the logic such that the correct portion of the file is extracted when an
offset is specified.
ASTERISK-21765
Reported by: John Zhong
Tested by: Matt Jordan, Di-Shi Sun
patches:
file_read_390821.patch uploaded by Di-Shi Sun (License 5076)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432935 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch corrects the documentation for the AMD application. Specifically:
* It documents the maximum_word_length option, which limits the maximum allowed
length of a single utterance.
* It clarifies the AMDCAUSE values MAXWORDS and MAXWORDLENGTH. MAXWORDLENGTH
was documented as MAXWORDS, while MAXWORDS was undocumented.
Thanks to the issue reporter, Frank DiGennaro, for pointing out the issues.
ASTERISK-19470 #close
Reported by: Frank DiGennaro
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432918 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an audiohook is created (which is used by the various Spy applications
and Snoop channel in Asterisk 13+), it initially is given a sample rate of
8kHz. It is expected, however, that this rate may change based on the media
that passes through the audiohook. However, the read/write operations on the
audiohook behave very differently.
When a frame is written to the audiohook, the format of the frame is checked
against the internal sample rate. If the rate of the format does not match
the internal sample rate, the internal sample rate is updated and a new SLIN
format is chosen based on that sample rate. This works just fine.
When a frame is read, however, we do something quite different. If the format
rate matches the internal sample rate, all is fine. However, if the rates
don't match, the audiohook attempts to "fix up" the number of samples that
were requested. This can result in some seriously large number of samples
being requested from the read/write factories.
Consider the worst case - 192kHz SLIN. If we attempt to read 20ms worth of
audio produced at that rate, we'd request 3840 samples (192000 / (1000 / 20)).
However, if the audiohook is still expecting an internal sample rate of 8000,
we'll attempt to "fix up" the requested samples to:
samples_converted = samples * (ast_format_get_sample_rate(format) /
(float) audiohook->hook_internal_samp_rate);
which is:
92160 = 3840 * (192000 / 8000)
This results in us attempting to read 92160 samples from our factories, as
opposed to the 3840 that we actually wanted. On a 64-bit machine, this
miraculously survives - despite allocating up to two buffers of length 92160
on the stack. The 32-bit machines aren't quite so lucky. Even in the case where
this works, we will either (a) get way more samples than we wanted; or (b) get
about 3840 samples, assuming the timing is pretty good on the machine.
Either way, the calculation being performed is wrong, based on the API users
expectations.
My first inclination was to allocate the buffers on the heap. As it is,
however, there's at least two drawbacks with doing this:
(1) It's a bit complicated, as the size of the buffers may change during the
lifetime of the audiohook (ew).
(2) The stack is faster (yay); the heap is slower (boo).
Since our calculation is flat out wrong in the first place, this patch fixes
this issue by instead updating the internal sample rate based on the format
passed into the read operation. This causes us to read the correct number of
samples, and has the added benefit of setting the audihook with the right
SLIN format.
Note that this issue was caught by the Asterisk Test Suite as a result of
r432195 in the 13 branch. Because this issue is also theoretically possible
in Asterisk 11, the change is being made here as well.
Review: https://reviewboard.asterisk.org/r/4475/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RAII_VAR, which is used extensively in Asterisk to manage reference counted
resources, uses a GCC extension to automatically invoke a cleanup function
when a variable loses scope. While this functionality is incredibly useful
and has prevented a large number of memory leaks, it also prevents Asterisk
from being compiled with clang.
This patch updates the RAII_VAR macro such that it can be compiled with clang.
It makes use of the BlocksRuntime, which allows for a closure to be created
that performs the actual cleanup.
Note that this does not attempt to address the numerous warnings that the clang
compiler catches in Asterisk.
Much thanks for this patch goes to:
* The folks on StackOverflow who asked this question and Leushenko for
providing the answer that formed the basis of this code:
http://stackoverflow.com/questions/24959440/rewrite-gcc-cleanup-macro-with-nested-function-for-clang
* Diederik de Groot, who has been extremely patient in working on getting this
patch into Asterisk.
Review: https://reviewboard.asterisk.org/r/4370/
ASTERISK-24133
ASTERISK-23666
ASTERISK-20399
ASTERISK-20850 #close
Reported by: Diederik de Groot
patches:
RAII_CLANG.patch uploaded by Diederik de Groot (License 6600)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When escaping backslashes with MySQL, the proper way to escape the characters
in a LIKE clause is to escape the '\' four times, i.e., '\\\\'. To quote the
MySQL manual:
"Because MySQL uses C escape syntax in strings (for example, “\n” to represent
a newline character), you must double any “\” that you use in LIKE strings.
For example, to search for “\n”, specify it as “\\n”. To search for “\”,
specify it as “\\\\”; this is because the backslashes are stripped once by the
parser and again when the pattern match is made, leaving a single backslash to
be matched against."
ASTERISK-24808 #close
Reported by: Javier Acosta
patches:
res_config_odbc.diff uploaded by Javier Acosta (License 6690)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an IMAP backend is in use and greetings are set to be used, but aren't
present for a user in their IMAP folder, Asterisk will crash. This occurs
due to the mailstream being set to the 'greetings' folder and being left
in that particular state, regardless of the success/failure of the attempt
to access the folder the mailstream points to. Later access of the mailstream
assumes that it points to the 'INBOX' (or some other folder), resulting in
either a crash (if the greetings folder didn't exist and the mailstream is
invalid) or an inability to read messages from the 'INBOX' folder.
This patch restores the mailstream to its correct state after accessing the
greetings. This fixes the crash, and sets the mailstream to the state that
VoiceMailMain expects.
Note that while ASTERISK-23390 also contained a patch for this issue, the
patch on ASTERISK-24786 is the one being merged here.
Review: https://reviewboard.asterisk.org/r/4459/
ASTERISK-23390 #close
Reported by: Ben Smithurst
ASTERISK-24786 #close
Reported by: Graham Barnett
Tested by: Graham Barnett
patches:
app_voicemail.c.patch.SIGSEGV3rev2 uploaded by Graham Barnett (License 6685)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432695 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The localtime management in the Asterisk core contains a thread that watches
for changes in the local timezone. On systems where the directory containing
/etc/localtime is modified frequently, the thread monitoring the changes will
be woken up to determine if any changes in timezone have occurred. When using
kqueue(2), this can cause a leak of file descriptors due to some improper
management of resources.
This patch updates the kqueue(2) handling in localtime, such that is no longer
leaks resources.
Review: https://reviewboard.asterisk.org/r/4450/
ASTERISK-24739 #close
Reported by: Ed Hynan
patches:
11.15.0-u.diff uploaded by Ed Hynan (Licnese 6680)
11.7.0-u.diff uploaded by Ed Hynan (License 6680)
svn-trunk-Jan-26-2015-u.diff uploaded by Ed Hynan (License 6680)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The distinctive ring feature interferes with detecting Caller ID and
appears to have been broken for years. What happens is if you have a
ring-ring cadence as used in the UK you get too many DAHDI events for the
distinctive ring pattern array and Caller ID detection is aborted. I
think when Zapata/DAHDI added the ring begin event it broke distinctive
ring. More events happen than before and the code does no filtering of
which event times are recorded in the pattern array.
* Made distinctive ring only record the ringt count when the ring ends
instead of on just any DAHDI event. Distinctive ring can be ring,
ring-ring, ring-ring-ring, or different ring durations for the up to three
rings.
* Fixed the distinctive ring detection enable (chan_dahdi.conf option
usedistinctiveringdetection) to be per port instead of somewhat per port
and somewhat global. This has been broken since v1.8.
* Fixed using the default distinctive ring context when the detected
pattern does not match any configured dringX patterns. The default
context did not get set when the previous call was a matched distinctive
ring pattern and the current call is not matched. This has been broken
since v1.8.
* Made distinctive ring have no effect on Caller ID detection when it is
disabled. Caller ID detection just monitors for 10 seconds before giving
up.
* Fixed leak of struct callerid_state memory when a polarity reversal
during Caller ID detection causes the incoming call to be aborted.
DAHDI-1143
AST-1545
ASTERISK-24825 #close
Reported by: Richard Mudgett
ASTERISK-17588
Reported by: Daniel Flounders
Review: https://reviewboard.asterisk.org/r/4444/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a realtime peer is built it can cause a locking inversion when the
just built peer is poked. If the CLI command "sip show channels" is
periodically executed then a deadlock can happen because of the locking
inversion.
* Push the peer poke off onto the scheduler thread to avoid the locking
inversion of the just built realtime peer.
AST-1540
ASTERISK-24838 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4454/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a leftover "assert" in app_voicemail/__messagecount that references
variables that don't exist. This causes the compile to fail when
--enable-dev-mode and IMAP_STORAGE are selected.
This patch removes the assert.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4461/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Both the apps and channels Makefiles still listed 'res_features' as modules to
link against when compiling for cygwin or mingw32. This module hasn't existed
for quite some time.
ASTERISK-18105 #close
Reported by: feyfre
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk fails to start a PBX thread for a new channel - for example, when
the maxcalls setting in asterisk.conf is exceeded - we currently send a final
response, and then attempt to send a BYE request to the UA. Since that's all
sorts of wrong, this patch fixes that by setting sipalreadygone on the sip_pvt
such that we don't get stuck sending BYE requests to something that does not
want it.
Note that this patch is a slight modification of the one on ASTERISK-15434.
For clarity, it explicitly calls sipalreadygone with the calls to transmit a
final response.
ASTERISK-21845
ASTERISK-15434 #close
Reported by: Makoto Dei
Tested by: Matt Jordan
patches:
sip-pbxstart-failed.patch uploaded by Makoto Dei (License 5027)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432320 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since Asterisk won't build without the library, not having it is definitely
an error. Thanks to Kyle Kurz for pointing this out.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432280 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we receive an SDP as part of an offer/answer for a peer/friend has been
configured to require encryption, and that SDP offer/answer failed to provide
acceptable crypto attributes, we currently issue a WARNING that uses the phrase
"we" and "requested". In this case, both of those terms are ambiguous - the
user will probably think "we" is Asterisk (it most likely isn't) and it may
not be a "request", so much as an SDP that was received in some fashion.
This patch makes the WARNING messages slightly less bad and a bit more
accurate as well.
ASTERISK-23214 #close
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, SDP offers negotiating SDES-SRTP crypto attributes would
be rejected if those crypto attributes contained either a key lifetime or a
MKI parameter. While from a theoretical point of view this was defensible -
Asterisk does not support key lifetimes or multiple crypto keys - from a
practical point of view, this is quite a problem. A large number of endpoints
offer lifetimes/MKI, which Asterisk can tolerate so long as it doesn't actually
have to support anything more than a single key or refresh the key.
In reality, this is (so far as we've seen) always the case.
This patch is a forward port of Olle's work in the lingon-srtp-key-lifetime-1.8
branch. To quote Olle from ASTERISK-17721, it handles lifetime/MKI parameters
in the following fashion:
> The Lingon branch now handle lifetime and MKI parameters.
>
> We only accept lifetimes up to max for the crypto and higher than 10 hours
> for packetization of 20 ms (50 pps).
>
> We only handle MKI with index 1.
>
> We do not really bother with counting packets and reinviting at end of
> lifetime, so the min of 10 hours kind of takes care of most calls. If there
> are longer ones, we rely on the other side for re-invites.
>
> It's still not perfect, but I personally think this is an improvement. A
> configuration option for minimum lifetime accepted could be added.
When the patch was ported forward, I decided against adding a configuration
option as Olle's handling was more than sufficient for every case I've seen
come through the issue tracker or through interoperability testing. We can
revisit that decision if it proves to be false.
A few small other tweaks were made to the surrounding code to reduce
indentation and provide better type safety for the 'tag' parameter.
Review: https://reviewboard.asterisk.org/r/4419/
Review: https://reviewboard.asterisk.org/r/4418/
ASTERISK-17721 #close
Reported by: Terry Wilson
ASTERISK-17899 #close
Reported by: Dwayne Hubbard
patches:
lingon-srtp-key-lifetime-1.8.diff uploaded by oej (License 5267)
ASTERISK-20233
Reported by: tootai
ASTERISK-22748
Reported by: Alejandro Mejia
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432239 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some WebSocket applications, like [chan_respoke][], require a larger
frame size than the default 8k; this patch bumps the default to 16k.
This patch also fixes some problems exacerbated by large frames.
The sanity counter was decremented on every fread attempt in
ws_safe_read(), regardless of whether data was read from the socket or
not. For large frames, this could result in loss of sanity prior to
reading the entire frame. (16k frame / 1448 bytes per segment = 12
segments).
This patch changes the sanity counter so that it only decrements when
fread() doesn't read any bytes. This more closely matches the original
intention of ws_safe_read(), given that the error message is
"Websocket seems unresponsive".
This patch also properly logs EOF conditions, so disconnects are no
longer confused with unresponsive connections.
[chan_respoke]: https://github.com/respoke/chan_respoke
Review: https://reviewboard.asterisk.org/r/4431/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the monitor thread is stopped, its pthread ID is set to a specific value
(AST_PTHREADT_STOP) so that later portions of the code can determine whether
or not it is safe to manipulate the thread. Unfortunately, __sip_reliable_xmit
failed to check for that value, checking instead only for AST_PTHREAD_STOP.
Passing the invalid yet very specific value to pthread_kill causes a crash.
This patch adds a check for AST_PTHREADT_STOP in __sip_reliable_xmit such that
it doesn't attempt to poke the thread if the thread has already been stopped.
ASTERISK-24800 #close
Reported by: JoshE
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When more than one call using the same codec type enters into a softmix bridge
and no audio is present for a channel the bridge optimizes the out frame by
using the same one for all channels with the same codec type. Unfortunately,
when that number (channels with same codec type) dropped to <= 1 the codec
was not dereferenced. At least not until all parties left the bridge. Thus in
the case of G.729 the license was not released. This patch ensures that the
codec is dereferenced immediately when the optimization no longer applies.
ASTERISK-24797 #close
Reported by: Luke Hulsey
Review: https://reviewboard.asterisk.org/r/4429/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using IMAP voicemail with FreePBX, you will often get ERROR messages
complaining about not being able to find a mailbox. This is due to how FreePBX
handles voicemail mailboxes. Unfortunately, app_voicemail has to consider this
a configuration error, as in any other system it would be indicative of
someone misconfiguring their system.
Regardless, a misconfiguration is a WARNING, and not an ERROR. This patch
demotes the message so that system administrators can hopefully reduce some
of the noise in their log files.
Note that in the original patch this was made into a NOTICE, but that's a
too forgiving.
ASTERISK-24790 #close
Reported by: Graham Barnett
patches:
app_voicemail.c.patch_noise uploaded by Graham Barnett (License 6685)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Change __ast_module_shutdown_ref to be NULL safe (11+).
* Allow modules that call ast_bucket_scheme_register or ast_codec_register
to be unloaded during graceful shutdown only (13+ only).
ASTERISK-24796 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4428/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When interfacing with Microsoft Exchange, custom headers will be returned as
all lower case. Currently, the IMAP header code will fail to parse the returned
custom headers, as it will be performing a case sensitive comparison. This can
cause playback of messages to fail, as needed information - such as origtime -
will not be present.
This patch updates app_voicemail's header parsing code to perform a case
insensitive lookup for the requested custom headers. Since the headers are
specific to Asterisk, e.g., 'x-asterisk-vm-orig-time', and headers should be
unique in an IMAP message, this should cause no issues with other systems.
ASTERISK-24787 #close
Reported by: Graham Barnett
patches:
app_voicemail.c.patch_MSExchange uploaded by Graham Barnett (License 6685)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@432012 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some distributions are going to disable SSLv3 at compile time. This option can
be checked using the directive OPENSSL_NO_SSL3_METHOD. This patch updates the
TCP/TLS handling in Asterisk to look for that directive before attempting to
use the SSLv3 specific methods.
ASTERISK-24799 #close
Reported by: Alexander Traud
patches:
no-ssl3-method.patch uploaded by Alexander Traud (License 6520)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@431936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
