https://origsvn.digium.com/svn/asterisk/trunk
................
r242521 | tilghman | 2010-01-24 00:40:31 -0600 (Sun, 24 Jan 2010) | 15 lines
Merged revisions 242520 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r242520 | tilghman | 2010-01-24 00:33:01 -0600 (Sun, 24 Jan 2010) | 8 lines
Only rebuild bison and flex source files on demand, if bison and flex are detected by the configure script.
Changed after discussion on the -dev list about possible unnecessary build
failures, due to checkouts/untars causing these special source files to
possibly be newer than their resulting C files. This should additionally
ensure that nobody need learn about extra Makefile arguments to ensure the
proper files get rebuilt when changes are made to these special source files.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@242524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r236613 | seanbright | 2009-12-28 10:22:54 -0500 (Mon, 28 Dec 2009) | 14 lines
Merged revisions 236585 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236585 | seanbright | 2009-12-28 10:12:08 -0500 (Mon, 28 Dec 2009) | 7 lines
Try a test compile to see if PTHREAD_ONCE_INIT requires extra braces.
There was conditional code (based on build platform) to optioinally wrap
PTHREAD_ONCE_INIT in braces that was removed since it is fixed in newer versions
of Solaris/OpenSolaris, but I am still running into it on Solaris 10 x86 so add
a configure-time check for it.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@236633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Set OSARCH to linux-gnu even if host_os is linux-gnueabi
* When checking if we are Linux, check OSARCH rather than host_os
The newer ARM ABI ("EABI") shows the OS name 'linux-gnueabi' rather than
'linux-gnu' . This patch sets OSARCH to be 'linux-gnu' even in such a case.
OSARCH is tested for the value of 'linux-gnu' in one or two places in the
tree. This patch also fixes the check libcap to check for $OSARCH rather
than $host_os .
See also: http://wiki.debian.org/ArmEabiPort
Merged revisions 225957 via svnmerge from
http://svn.digium.com/svn/asterisk/branches/1.4
Merged revisions 226018 via svnmerge from
http://svn.digium.com/svn/asterisk/trunk
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@226019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r214696 | kpfleming | 2009-08-28 15:01:21 -0500 (Fri, 28 Aug 2009) | 9 lines
Ensure that CFLAGS and/or LDFLAGS provided to configure script are preserved.
Cross-compilation environments want to provide 'defaults' for compiler and
linker options, and frequently do this by specifying CFLAGS and LDFLAGS in the
environment or as command-line arguments to the configure script. This patch
modifies the configure script and Makefile to preserve these settings and
ensure they are used in the build process.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@214697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r201056 | kpfleming | 2009-06-16 13:54:30 -0500 (Tue, 16 Jun 2009) | 18 lines
Merged revisions 200991 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
................
r201090 | kpfleming | 2009-06-16 14:27:12 -0500 (Tue, 16 Jun 2009) | 5 lines
Another minor fix to compiler attribute checking.
Defaulting to 'static' for the function scope was bad... so remove it.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@201093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200985 | kpfleming | 2009-06-16 11:32:36 -0500 (Tue, 16 Jun 2009) | 7 lines
Fix problems with new compiler attribute checking in configure script.
The last changes to ast_gcc_attribute.m4 caused some problems checking for
various attributes, because the scope of the symbol the attribute is applied
to can be important; this patch allows the scope to be specified for the check.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@200986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200764 | kpfleming | 2009-06-15 20:28:08 -0500 (Mon, 15 Jun 2009) | 11 lines
Ensure that configure-script testing for compiler attributes actually works.
The configure script tests for compiler attributes didn't actually enable
enough warnings or provide a proper test harness to determine whether the
compiler supports the attribute in question or not; this caused gcc 4.1 to
report that it supports 'weakref', but it doesn't actually support it in the
way that is needed for our optional API mechanism. The new configure script
test will properly distinguish between full support and partial support
for this attribute, among others.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@200767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r190725 | kpfleming | 2009-04-27 14:30:54 -0500 (Mon, 27 Apr 2009) | 13 lines
Merged revisions 190721 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r190721 | kpfleming | 2009-04-27 14:29:46 -0500 (Mon, 27 Apr 2009) | 7 lines
Fix 'inconsistent line endings' when autoconf 2.63 is used
Attempt to make configure script regeneration 'safe' using autoconf 2.63, which embeds a bare CR into the script, thus making Subversion complain about inconsistent line endings
This commit changes the MIME type of the configure script to be 'binary' thus making Subversion no longer inspect line endings, and as a bonus 'svn diff' will no longer try to generate diff output for it, which is not generally useful anyway.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@190730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r189629 | dbailey | 2009-04-21 09:28:04 -0500 (Tue, 21 Apr 2009) | 10 lines
Merged revisions 189601 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189601 | dbailey | 2009-04-21 09:00:55 -0500 (Tue, 21 Apr 2009) | 3 lines
Add check in configure script to check for GLOB_NOMAGIC and GLOB_BRACE in glob.h
This allows config.c to compile when linked against uclibc that does not support these parameters
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189630 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182847 | russell | 2009-03-17 21:28:55 -0500 (Tue, 17 Mar 2009) | 52 lines
Merged revisions 182810 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r182722 | jpeeler | 2009-03-17 15:47:31 -0500 (Tue, 17 Mar 2009) | 15 lines
Allow H.323 Plus library to be used in addition to the OpenH323 library
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
(closes issue #11261)
Reported by: vhatz
Patches:
asterisk-1.6.0.6-h323plus.patch uploaded by jthurman (license 614)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r181731 | tilghman | 2009-03-12 12:32:13 -0500 (Thu, 12 Mar 2009) | 9 lines
Adjust translation table column widths based upon the translation times.
Previously, only 5 columns were displayed, and if a translation time exceeded
99,999 useconds, it would be displayed as 0, instead of its actual time.
(closes issue #14532)
Reported by: pj
Patches:
20090311__bug14532.diff.txt uploaded by tilghman (license 14)
Tested by: pj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@181732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r177162 | jpeeler | 2009-02-18 14:11:57 -0600 (Wed, 18 Feb 2009) | 14 lines
Modify h323 to build against PTLib as well as the older PWLib
Several changes in PTLib have occurred requiring build time detection. Changes
accounted for include the library name change, config option change, install
location change, and a boolean type change which is handled by ast_ptlib.h.
Also, the sed check has been modified to properly work with autoconf >= 2.62.
(closes issue #14224)
Reported by: bergolth
Patches:
asterisk-autoconf-sed.patch uploaded by bergolth (license 661)
asterisk-pwlib-v3.patch uploaded by bergolth (license 661)
Tested by: jpeeler
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@177163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r172441 | tilghman | 2009-01-29 17:15:40 -0600 (Thu, 29 Jan 2009) | 16 lines
Merged revisions 172438 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172438 | tilghman | 2009-01-29 16:54:29 -0600 (Thu, 29 Jan 2009) | 9 lines
Lose the CAP_NET_ADMIN at every fork, instead of at startup. Otherwise, if
Asterisk runs as a non-root user and the administrator does a 'restart now',
Asterisk loses the ability to set QOS on packets.
(closes issue #14004)
Reported by: nemo
Patches:
20090105__bug14004.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r159818 | kpfleming | 2008-11-29 11:57:39 -0600 (Sat, 29 Nov 2008) | 18 lines
incorporates r159808 from branches/1.4:
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@159855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r157600 | seanbright | 2008-11-18 19:27:45 -0500 (Tue, 18 Nov 2008) | 10 lines
Fix a few build problems on Solaris (and check for an md5 utility in
configure instead of the icky loop I was doing before).
(closes issue #13842)
Reported by: snuffy
Patches:
bug13842_20081106.diff uploaded by snuffy (license 35)
13842.diff uploaded by seanbright (license 71)
Tested by: snuffy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@157601 65c4cc65-6c06-0410-ace0-fbb531ad65f3
------------------------------------------------------------------------
r153709 | kpfleming | 2008-11-02 17:34:39 -0600 (Sun, 02 Nov 2008) | 3 lines
instead of trying to forcibly load res_agi when app_stack is loaded (even if the administrator didn't want it loaded), use GCC weak symbols to determine whether it was loaded already or not; if it was loaded, then use it.
------------------------------------------------------------------------
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@153745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r151242 | kpfleming | 2008-10-20 07:59:04 +0300 (Mon, 20 Oct 2008) | 9 lines
Merged revisions 151240 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r151240 | kpfleming | 2008-10-20 07:45:56 +0300 (Mon, 20 Oct 2008) | 3 lines
break up acinclude.m4 into individual files, which will make it easier to maintain, easier to add new macros (less patching) and will ease maintenance of these macros across Asterisk branches
........
................
r151243 | kpfleming | 2008-10-20 08:00:56 +0300 (Mon, 20 Oct 2008) | 9 lines
Merged revisions 151241 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r151241 | kpfleming | 2008-10-20 07:57:33 +0300 (Mon, 20 Oct 2008) | 2 lines
rename this macro to properly reflect what it does
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@151244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r147807 | murf | 2008-10-09 08:17:33 -0600 (Thu, 09 Oct 2008) | 15 lines
(closes issue #13557)
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@147809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r145692 | seanbright | 2008-10-01 18:48:16 -0500 (Wed, 01 Oct 2008) | 7 lines
Try a test compile using the GMime library. Some distros install gmime-config
in the base package instead of the -devel package. Now we print a notice and
disable GMime support instead of bombing during the main compilation.
(closes issue #13583)
Reported by: arkadia
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@145697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r134650 | tilghman | 2008-07-30 16:40:08 -0500 (Wed, 30 Jul 2008) | 12 lines
Merged revisions 134649 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134649 | tilghman | 2008-07-30 16:38:50 -0500 (Wed, 30 Jul 2008) | 4 lines
Qwell pointed out, via IRC, that the previous fix only worked when explicitly
set. When nothing is set, and the option is implied, it breaks, because
configure sets the prefix to 'NONE'. Fixing.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@134651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r134125 | mmichelson | 2008-07-28 14:53:56 -0500 (Mon, 28 Jul 2008) | 27 lines
This commit compensates for buggy poll(2)
implementations. Asterisk has, for a long time,
had its own implementation of poll(2) which
just used the input arguments to call select(2).
In 1.4, this internal implementation was used
for Darwin systems. This was removed in Asterisk
trunk at some point, but it seems as though this
was not the right move to make.
On Mac OS X, it appears as though the poll used
to gather CLI input does not respond properly
when connecting via a remote Asterisk console.
Reverting to the use of Asterisk's poll fixed
the issue.
Also, there is now an option for the configure
script, --enable-internal-poll, which will allow
for anyone to use Asterisk's internal poll
implementation in case they suspect that their
system's poll implementation is buggy.
closes issue #11928)
Reported by: adriavidal
Patches:
1.6.0-configurev2.patch uploaded by putnopvut (license 60)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@134126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r132390 | russell | 2008-07-21 09:47:41 -0500 (Mon, 21 Jul 2008) | 16 lines
Remove libresample from the Asterisk source tree. It is now available in its
own repository, and must be installed like any other library for Asterisk to
use. The two modules that require it are codec_resample and app_jack.
To install libresample:
$ svn co http://svn.digium.com/svn/libresample/trunk libresample
$ cd libresample
$ ./configure
$ make
$ sudo make install
This code is currently in our own repository because the build system did not
include the appropriate targets for building a dynamic library or for installing
the library.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@132391 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r130040 | kpfleming | 2008-07-11 10:57:17 -0500 (Fri, 11 Jul 2008) | 12 lines
Merged revisions 130039 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130039 | kpfleming | 2008-07-11 10:41:56 -0500 (Fri, 11 Jul 2008) | 4 lines
add support for a configuration parameter for 'inband audio during RELEASE', which is currently mandatory in libpri-1.4.4 but will become configurable in libpri-1.4.5 later today
(related to issue #13042)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@130041 65c4cc65-6c06-0410-ace0-fbb531ad65f3
