Added "like" support for 'core show taskprocessors'. Now you
can specify a specific set of taskprocessors (or just one) by
adding the keyword "like" to the above command, followed by
your search criteria.
Change-Id: I021e740201e9ba487204b5451e46feb0e3222464
Added two new CLI commands to reset stats for taskprocessors. You can
reset stats for a single, specific taskprocessor ('core reset
taskprocessor <taskprocessor>'), or you can reset all taskprocessors
('core reset taskprocessors'). These commands will reset the counter for
the number of tasks processed as well as the max queue size.
Change-Id: Iaf17fc4ae29396ab0c6ac92408fc7bdc2f12362d
This change adds support to the JITTERBUFFER dialplan function
for audio and video synchronization. When enabled the RTCP SR
report is used to produce an NTP timestamp for both the audio and
video streams. Using this information the video frames are queued
until their NTP timestamp is equal to or behind the NTP timestamp
of the audio. The audio jitterbuffer acts as the leader deciding
when to shrink/grow the jitterbuffer when adaptive is in use. For
both adaptive and fixed the video buffer follows the size of the
audio jitterbuffer.
ASTERISK-28533
Change-Id: I3fd75160426465e6d46bb2e198c07b9d314a4492
Allow the list of files to be played to be provided explicitly in the
music class's configuration. The primary driver for this change is to
allow URLs to be used for MoH.
Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa
This change adds H.265/HEVC as a known codec and creates a cached
"h265" media format for use.
Note that RFC 7798 section 7.2 also describes additional SDP
parameters. Handling of these is not yet supported.
ASTERISK-28512
Change-Id: I26d262cc4110b4f7e99348a3ddc53bad0d2cd1f2
This fix allows a realtime moh class to be unregistered from the command
line. This is useful when the contents of a directory referenced by a
realtime moh class have changed.
The realtime moh class is then reloaded on the next request and uses the
new directory contents.
ASTERISK-17808
Change-Id: Ibc4c6834592257c4bb90601ee299682d15befbce
The Channel resource has a new sub-resource "externalMedia".
This allows an application to create a channel for the sole purpose
of exchanging media with an external server. Once created, this
channel could be placed into a bridge with existing channels to
allow the external server to inject audio into the bridge or
receive audio from the bridge.
See https://wiki.asterisk.org/wiki/display/AST/External+Media+and+ARI
for more information.
Change-Id: I9618899198880b4c650354581b50c0401b58bc46
The UnicastRTP channel driver provided by chan_rtp now accepts
"<hostname>:<port>" as an alternative to "<ip_address>:<port>"
in the destination. The first AAAA (preferred) or A record resolved
will be used as the destination. The lookup is synchronous so beware
of possible dialplan delays if you specify a hostname.
Change-Id: Ie6f95b983a8792bf0dacc64c7953a41032dba677
There are 4 scenarios to consider when capturing audio from a channel
with an audiohook:
1. There is no rx and no tx audio, so return nothing.
2. There is rx but no tx audio, so return rx.
3. There is tx but no rx audio, so return tx.
4. There is rx and tx audio, so mix them and return.
The file passed as the primary argument to MixMonitor will be written to
in scenarios 2, 3, and 4. However, if you pass the r() and t() options
to MixMonitor, a frame will only be written to the r() file if there was
rx audio and a frame will only be written to the t() file if there was
tx audio.
If you subsequently take the r() and t() files and try to mix them, the
sides of the conversation will 'drift' and be non-representative of the
user experience.
This patch adds a new 'S' option to MixMonitor that injects a frame of
silence on either the r() side or the t() side of the channel so that
when later mixed, there is no such drift.
Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e
Previously, when a Transfer (REFER) was performed, chan_pjsip would set
the TRANSFERSTATUS to SUCCESS when the REFER was queued up. This did not
reflect a successful/unsuccessful transfer the way chan_sip did.
Added a callback module to process the refer subscription information.
Now depends on res_pjsip_pubsub so call transfer progress can be monitored
and reported
ASTERISK-26968 #close
Reported-by: Dan Cropp
Change-Id: If6c27c757c66f71e8b75e3fe49da53ebe62395dc
Two new Makefile targets have been added... "install-headers" and
"uninstall-headers" to separately control header installation.
The existing behavior has not changed so "make install" and
"make uninstall" will continue to also install/uninstall the headers.
The new targets were added for forward compatibility with Asterisk 17
in which the headers are no longer installed/uninstalled with the
"install" and "uninstall" targets.
Also corrects an issue where /usr/include/asterisk.h was never
being removed at all.
Change-Id: Ia7399f3a0203a4825fc4a9f43b9034dae9a2b643
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
AttendedTransfer queues up attended transfer to the given extension.
This application can be useful with Custom Dynamic Features.
For example to make attended transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_atxfer => *7,self,GoSub,"my_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_atxfer
TRANSFER_CONTEXT=my_transfer
[my_atxfer]
exten => s,1,AttendedTransfer(1234567890)
same => n,Return()
[my_transfer]
include => default
;;;
This application also can be used to completly redefine Attended transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
atxfer => *7
[applicationmap]
custom_atxfer => *2,self,GoSub,"custom_atxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_atxfer
TRANSFER_CONTEXT=my_transfer
[custom_atxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,AttendedTransfer(${dest})
same => n,Return()
[my_transfer]
include => default
;;;
Change-Id: Ie5cfa455d0813cffd5c85a6fb117f07d8f0b903b
One of the change files doesn't conform to the format that the release
scripts need in order to parse it.
Change-Id: Ie0b634cf27e4cbc671b9fe92993b6f2ecf60254c
BlindTransfer redirects all channels currently bridged to the
caller channel to the specified destination.
This application can be useful with Custom Dynamic Features.
For example to make blind transfer to a predefined number.
features.conf
;;;
[applicationmap]
my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=my_blindxfer
[my_blindxfer]
exten => s,1,BlindTransfer(1234567890,default)
same => n,Return()
;;;
This application also can be used to completly redefine Blind transfer
feature using dialplan. For example:
features.conf
;;;
[featuremap]
blindxfer =>
[applicationmap]
custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default
;;;
extensions.conf
;;;
[globals]
DYNAMIC_FEATURES=custom_blindxfer
[custom_blindxfer]
exten => s,1,
same => n,Playback(pbx-transfer)
same => n,Read(dest,dial,10,i,3,3)
same => n,BlindTransfer(${dest},default)
same => n,Return()
;;;
Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a
This patch adds the 'p' option.
The extension entered will be considered complete when a # is entered.
Change-Id: If77c40c9c8b525885730821e768f5dea71cf04c1
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
[ice_host_candidates]
192.168.1.1 = 1.2.3.4,include_local_address
This causes both 192.168.1.1 and 1.2.3.4 to be advertized.
Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled
at the earliest received PROGRESS or RINGING.
Added millisecond versions of DIALEDTIME and ANSWEREDTIME.
Added millisecond versions of ast_channel_get_up_time and
ast_channel_get_duration in channel.c.
ASTERISK-28363
Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
This changes the way that we handle adding changes to CHANGES and
UPGRADE.txt. The reason for this is because whenever someone needed to
make a change to one of these files and someone else had already done
so, you would run into merge conflicts. With this new setup, there will
never be merge conflicts since all changes will be documented in the
doc/<file>-staging directory. The release script is now responsible for
merging all of these changes into the appropriate files.
There is a special format that these files have to follow in order to be
parsed. The files do not need to have a meaningful name, but it is
strongly recommended. For example, if you made a change to pjsip, you
may have something like this "res_pjsip_relative_title", where
"relative_title" is something more descriptive than that. Inside each
file, you will need a subject line for your change, followed by a
description. There can be multiple subject lines. The file may look
something like this:
Subject: res_pjsip
Subject: Core
A description that explains the changes made and why. The release
script will handle the bulleting and section separators!
You can still separate with new lines within your
description.
The headers ("Subject" and "Master-Only") are case sensative, but the
value for "Master-Only" ("true" or "True") is not.
For more information, check out the wiki page:
https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt
ASTERISK-28111 #close
Change-Id: I19cf4b569321c88155a65e9b0b80f6d58075dd47
This is the first step in changing the release process so that changes
made to the CHANGES and UPGRADE.txt files do not result in merge
conflicts every time multiple people modify these files. The changes
made will go in these new directories: doc/CHANGES-staging and
doc/UPGRADE-staging. The README.md files explain how things will work,
but here's a little overview. When you make a change that would go in
either CHANGES or UPGRADE.txt, this should instead be documented in a
new file in the doc/CHANGES-staging or doc/UPGRADE-staging directory,
respectively. The format will look like this:
Subject: res_pjsip
A description that explains the changes made and why. The release
script will handle the bulleting and section separators! The
'Subject:' header is case-sensitive.
You can still separate with new lines within your description.
Subject: res_ari
Master-Only: true
You can have more than one subject, and they don't have to be the
same! Also, the 'Master-Only' header should always be true and is
also case-sensitive (but the value is not - you can have 'true' or
'True'). This header will only ever be present in the master branch.
For more information, check out the wiki page:
https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt
This is an initial change for ASTERISK_28111. Functionally, this will
make no difference, but it will prep the directories for when the
changes from CHANGES and UPGRADE.txt are extracted.
Change-Id: I8d852f284f66ac456b26dcb899ee46babf7d15b6
* Consistently use spaces in rest-api-templates/asterisk_processor.py.
* Exclude third-party from docs/full-en_US.xml.
* Add docs/full-en_US.xml to .gitignore.
* Use list() to convert python3 view.
* Use python3 print function.
* Replace cmp() with equivalent equation.
* Replace reference to out of scope subtype variable with name
parameter.
* Use unescaping triple bracket notation in mustache templates where
needed. This causes behavior of Python2 to be maintained when using
Python3.
* Fix references to has_websocket / is_websocket in
res_ari_resource.c.mustache.
* Update calculation of has_websocket to use any().
* Use unicode mode for writing output file in transform.py.
* Replace 'from swagger_model import *' with explicit import of required
symbols.
I have not tested spandspflow2pcap.py or voicemailpwcheck.py, only the
print syntax has been fixed.
Change-Id: If5c5b556a2800d41a3e2cfef080ac2e151178c33
This document is out of date and is superseded by content on the
Asterisk wiki.
ASTERISK-24386 #close
Change-Id: Idbf95b27b096c205251e1bbb560c79224ba81822
In multi-party bridges, Asterisk currently supports two video modes:
* Follow the talker, in which the speaker with the most energy is shown
to all participants but the speaker, and the speaker sees the
previous video source
* Explicitly set video sources, in which all participants see a locked
video source
Prior to this patch, ARI had no ability to manipulate the video source.
This isn't important for two-party bridges, in which Asterisk merely
relays the video between the participants. However, in a multi-party
bridge, it can be advantageous to allow an external application to
manipulate the video source.
This patch provides two new routes to accomplish this:
(1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId}
Sets a video source to an explicit channel
(2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource
Removes any explicit video source, and sets the video mode to talk
detection
ASTERISK-26595 #close
Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621
This updates func_channel.c and main/message.c to use a generic xpointer
include instead of including info from each channel driver. Now the
name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in
documentation for func_channel. Setting the name attribute of info to
MessageToInfo or MessageFromInfo causes it to be included in the
MessageSend application and AMI action.
Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea
* Following the example of the PJSIP channel driver, the channel
technology specific documentation has been moved to the respective
channel drivers that provide that functionality. This has the benefit
of locating the documentation of items with those modules that provide
it.
* Examples of using the CHANNEL function for both standard items as well
as for PJSIP have been added.
* The 'max_forwards' standard item has been documented.
Change-Id: Ifaa79a232c8ac99cf8da6ef6cc7815d398b1b79b
Previous versions of Asterisk processed command-line options before
processing asterisk.conf. This meant that if an option was set in
asterisk.conf, it could not be overridden with the equivelent command
line option. This change causes Asterisk to process the command-line
twice. First it processes options that are needed to load asterisk.conf,
then it processes the remaining options after the config is read.
This changes the function of -X slightly. Previously using -X without
disabling execincludes in asterisk.conf caused #exec to be usable in any
config. Now -X only enables #exec for the load of asterisk.conf, if it
is wanted in the rest of the system it must be enabled with execincludes
in asterisk.conf. Updated 'asterisk -h' and 'man asterisk' to reflect
the limited function of -X.
ASTERISK-25042 #close
Reported by: Corey Farrell
Change-Id: I1450d45c15b4467274b871914d893ed4f6564cd7
Moved contrib/asterisk-ng-doxygen to doc/asterisk-ng-doxygen.in
Changed /Makefile to copy asterisk-ng-doxygen.in to
asterisk-ng-doxygen then modify it with version instead of
modifying asterisk-ng-doxygen directly. Updated clean
targets as well.
Updated /.gitignore and doc/.gitignore.
Change-Id: I38712d3e334fa4baec19d30d05de8c6f28137622
Create the directory './doc/rest-api' at the start of 'make ari-stubs'
to prevent an error when documentation is generated. The directory is
also added to git ignores.
ASTERISK-25027
Reported by: Corey Farrell
Change-Id: Iaccc7f0138501c23aa78feaca2f3cce9e68cbc1b
