https://origsvn.digium.com/svn/asterisk/trunk
........
r216993 | dvossel | 2009-09-08 09:26:30 -0500 (Tue, 08 Sep 2009) | 14 lines
caller id number empty
parse_uri was not being given the correct scheme's, as
a result, uri parsing did not parse the username correctly.
One of the side effects of this is an empty caller id.
(closes issue #15839)
Reported by: ebroad
Patches:
blank_cidv2.patch uploaded by ebroad (license 878)
parse_uri_fix.diff uploaded by dvossel (license 671)
Tested by: ebroad, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@216995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r216438 | oej | 2009-09-04 16:02:34 +0200 (Fre, 04 Sep 2009) | 35 lines
Merged revisions 216430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r216430 | oej | 2009-09-04 15:45:48 +0200 (Fre, 04 Sep 2009) | 27 lines
Make apps send PROGRESS control frame for early media and fix too early media issue in SIP
The issue at hand is that some legacy (dying) PBX systems send empty media frames on PRI
links *before* any call progress. The SIP channel receives these frames and by default
signals 183 Session progress and starts sending media. This will cause phones to
play silence and ignore the later 180 ringing message. A bad user experience.
The fix is twofold:
- We discovered that asterisk apps that support early media ("noanswer") did not send
any PROGRESS frame to indicate early media. Fixed.
- We introduce a setting in chan_sip so that users can disable any relay of media frames
before the outbound channel actually indicates any sort of call progress.
In 1.4, 1.6.0 and 1.6.1, this will be disabled for backward compatibility. In later versions
of Asterisk, this will be enabled. We don't assume that it will change your Asterisk
phone experience - only for the better.
We encourage third-party application developers to make sure that if they have applications
that wants to send early media, add a PROGRESS control frame transmission to make sure that
all channel drivers actually will start sending early media. This has not been the default
in Asterisk previous to this patch, so if you got inspiration from our code, you need to
update accordingly. Sorry for the trouble and thanks for your support.
This code has been running for a few months in a large scale installation (over 250
servers with PRI and/or BRI links to old PBX systems).
That's no proof that this is an excellent patch, but, well, it's tested :-)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@216646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r216368 | russell | 2009-09-04 08:14:25 -0500 (Fri, 04 Sep 2009) | 12 lines
Do not treat every SIP peer as if they were configured with insecure=port.
There was a problem in the function responsible for doing peer matching by
IP address and port number such that during the second pass for checking for
a peer configured with insecure=port, it would end up treating every peer as
if it had been configured that way. These changes fix the logic in the peer
IP and port comparison callback to handle insecure=port checking properly.
This problem was introduced when SIP peers were converted to astobj2. Many
thanks to dvossel for noticing this while working on another peer matching
issue.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@216434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r215758 | twilson | 2009-09-02 18:31:04 -0500 (Wed, 02 Sep 2009) | 25 lines
Merged revisions 215682 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r215682 | twilson | 2009-09-02 16:41:22 -0500 (Wed, 02 Sep 2009) | 18 lines
Re-send non-100 provisional responses to prevent cancellation
From section 13.3.1.1 of RFC 3261:
If the UAS desires an extended period of time to answer the INVITE,
it will need to ask for an "extension" in order to prevent proxies
from canceling the transaction. A proxy has the option of canceling
a transaction when there is a gap of 3 minutes between responses in a
transaction. To prevent cancellation, the UAS MUST send a non-100
provisional response at every minute, to handle the possibility of
lost provisional responses.
(closes issue #11157)
Reported by: rjain
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/315/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@215774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r215681 | dvossel | 2009-09-02 16:39:31 -0500 (Wed, 02 Sep 2009) | 10 lines
port string to int conversion using sscanf
There are several instances where a port is parsed
from a uri or some other source and converted to
an int value using atoi(), if for some reason the
port string is empty, then a standard port is used.
This logic is used over and over, so I created a function
to handle it in a safer way using sscanf().
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@215684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r215665 | mvanbaak | 2009-09-02 23:23:17 +0200 (Wed, 02 Sep 2009) | 5 lines
add Parkinglot info to sip show peer <foo> and skinny show line <foo>
If we had this from the start, debugging the 'parking not using configured parkinglot'
bug would have been easier.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@215679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r215462 | mvanbaak | 2009-09-02 17:56:46 +0200 (Wed, 02 Sep 2009) | 12 lines
Honor configured parkinglot when parking and retrieving parked calls
Thank oej for pointing out the fact that sip_new did not copy parkinglot from the peer
into the newly created channel.
(closes issue #15538)
Reported by: gracedman
Patches:
2009090100_sipnewparkinglot-161.diff.txt uploaded by mvanbaak (license 7)
With mod by me to also fix callparking as well (this uploaded patch only fixed retrieving a parked call)
Tested by: gracedman, mvanbaak
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@215464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r211876 | mnicholson | 2009-08-12 14:53:14 -0500 (Wed, 12 Aug 2009) | 11 lines
Make asterisk handle 423 Interval Too Short messages better.
This change uses separate values for the acceptable minimum expiry provided by the 423 error and the expiry value stored in the configuration file. Previously, the value pulled from the configuration file would be overwritten.
(closes issue #14366)
Reported by: Nick_Lewis
Patches:
sip-expiry-fix1.diff uploaded by mnicholson (license 96)
chan_sip.c-reqexpiry.patch uploaded by Nick (license 657)
Tested by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@211950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r210817 | file | 2009-08-06 14:47:04 -0300 (Thu, 06 Aug 2009) | 11 lines
Accept additional T.38 reinvites after an initial one has been handled.
Discussion of this subject has yielded that it is not actually acceptable to change
T.38 parameters after the initial reinvite but declining is harsh and can cause the
fax to fail when it may be possible to allow it to continue. This patch changes things
so that additional T.38 reinvites are accepted but parameter changes ignored. This gives
the fax a fighting chance.
(closes issue #15610)
Reported by: huangtx2009
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@210819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r208588 | mmichelson | 2009-07-24 13:31:04 -0500 (Fri, 24 Jul 2009) | 16 lines
Merged revisions 208587 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208587 | mmichelson | 2009-07-24 13:26:50 -0500 (Fri, 24 Jul 2009) | 10 lines
Only send a BYE when hanging up a channel that is up.
For cases where Asterisk sends an INVITE and receives a non 2XX final
response, Asterisk would follow the INVITE transaction by immediately
sending a BYE, which was unnecessary.
(closes issue #14575)
Reported by: chris-mac
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208548 | kpfleming | 2009-07-24 10:02:53 -0500 (Fri, 24 Jul 2009) | 8 lines
Resolve a T.38 negotiation issue left over from the udptl-updates merge.
The udptl-updates branch that was merged yesterday failed to properly send back
T.38 SDP responses with the correct error correction mode, if the incoming SDP
from the other end caused us to change error correction modes. This patch
corrects that situation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208464 | kpfleming | 2009-07-23 16:57:24 -0500 (Thu, 23 Jul 2009) | 46 lines
Rework of T.38 negotiation and UDPTL API to address interoperability problems
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r208388 | mmichelson | 2009-07-23 14:34:49 -0500 (Thu, 23 Jul 2009) | 24 lines
Merged revisions 208386 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208386 | mmichelson | 2009-07-23 14:24:21 -0500 (Thu, 23 Jul 2009) | 17 lines
Fix a problem where a 491 response could be sent out of dialog.
This generalizes the fix for issue 13849. The initial fix corrected the
problem that Asterisk would reply with a 491 if a reinvite were received
from an endpoint and we had not yet received an ACK from that endpoint
for the initial INVITE it had sent us. This expansion also allows Asterisk
to appropriately handle an INVITE with authorization credentials if Asterisk
had not received an ACK from the previous transaction in which Asterisk had
responded to an unauthorized INVITE with a 407.
(closes issue #14239)
Reported by: klaus3000
Patches:
14239.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@208390 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r207424 | mmichelson | 2009-07-20 14:48:12 -0500 (Mon, 20 Jul 2009) | 39 lines
Merged revisions 207423 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207423 | mmichelson | 2009-07-20 14:39:59 -0500 (Mon, 20 Jul 2009) | 33 lines
Answer video SDP offers properly when videosupport is not enabled.
Copied from Review board:
In issue 12434, the reporter describes a situation in which audio and video
is offered on the call, but because videosupport is disabled in sip.conf,
Asterisk gives no response at all to the video offer. According to RFC 3264,
all media offers should have a corresponding answer. For offers we do not
intend to actually reply to with meaningful values, we should still reply
with the port for the media stream set to 0.
In this patch, we take note of what types of media have been offered and
save the information on the sip_pvt. The SDP in the response will take into
account whether media was offered. If we are not otherwise going to answer
a media offer, we will insert an appropriate m= line with the port set to 0.
It is important to note that this patch is pretty much a bandage being
applied to a broken bone. The patch *only* helps for situations where video
is offered but videosupport is disabled and when udptl_pt is disabled but
T.38 is offered. Asterisk is not guaranteed to respond to every media offer.
Notable cases are when multiple streams of the same type are offered.
The 2 media stream limit is still present with this patch, too.
In trunk and the 1.6.X branches, things will be a bit different since Asterisk
also supports text in SDPs as well.
(closes issue #12434)
Reported by: mnnojd
Review: https://reviewboard.asterisk.org/r/311
Review: https://reviewboard.asterisk.org/r/313
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r206939 | dvossel | 2009-07-17 11:13:22 -0500 (Fri, 17 Jul 2009) | 20 lines
Merged revisions 206938 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r206938 | dvossel | 2009-07-17 11:05:06 -0500 (Fri, 17 Jul 2009) | 14 lines
SIP incorrect From: header information when callpres is prohib
Some ITSP make use of the "Anonymous" display name to detect a
requirement to withhold caller id across the PSTN. This does
not work if the display name is "Unknown".
(closes issue #14465)
Reported by: Nick_Lewis
Patches:
chan_sip.c-callerpres.patch uploaded by Nick (license 657)
chan_sip.c-callerpres_trunk.patch uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r206768 | dvossel | 2009-07-15 17:04:13 -0500 (Wed, 15 Jul 2009) | 8 lines
Session timer were not activated if Supported header field in INVITE had both "timer" and other options.
(closes issue #15403)
Reported by: makoto
Patches:
sip-session-timer.patch uploaded by makoto (license
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r206702 | dvossel | 2009-07-15 15:20:01 -0500 (Wed, 15 Jul 2009) | 10 lines
callerid(num) is wrong when username is missing
A domain only sip uri <sip:123.123.123.123> would return
123.123.123.123 as callid num. Now, if the username is
missing from a uri, the callerid num field is left empty.
(closes issue #15476)
Reported by: viraptor
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205985 | dvossel | 2009-07-10 16:42:10 -0500 (Fri, 10 Jul 2009) | 16 lines
SIP register not using peer's outbound proxy
If callbackextension is defined for a peer it successfully causes
a registration to occur, but the registration ignores the
outboundproxy settings for the peer. This patch allows the
peer to be passed to obproxy_get() in transmit_register().
(closes issue #14344)
Reported by: Nick_Lewis
Patches:
callbackextension_peer_trunk.diff uploaded by dvossel (license 671)
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/294/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r205840 | dvossel | 2009-07-10 11:42:04 -0500 (Fri, 10 Jul 2009) | 37 lines
Merged revisions 205804 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205804 | dvossel | 2009-07-10 11:23:59 -0500 (Fri, 10 Jul 2009) | 31 lines
SIP registration auth loop caused by stale nonce
If an endpoint sends two registration requests in a very short
period of time with the same nonce, both receive 401 responses
from Asterisk, each with a different nonce (the second 401
containing the current nonce and the first one being stale).
If the endpoint responds to the first 401, it does not match
the current nonce so Asterisk sends a third 401 with a newly
generated nonce (which updates the current nonce)... Now if
the endpoint responds to the second 401, it does not match the
current nonce either and Asterisk sends a fourth 401 with a
newly generated nonce... This loop goes on and on.
There appears to be a simple fix for this. If the nonce from
the request does not match our nonce, but is a good response
to a previous nonce, instead of sending a 401 with a newly
generated nonce, use the current one instead. This breaks
the loop as the nonce is not updated until a response is
received. Additional logic has been added to make sure no
nonce can be responded to twice though.
(closes issue #15102)
Reported by: Jamuel
Patches:
patch-bug_0015102 uploaded by Jamuel (license 809)
nonce_sip.diff uploaded by dvossel (license 671)
Tested by: Jamuel
Review: https://reviewboard.asterisk.org/r/289/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r205776 | mmichelson | 2009-07-10 10:56:45 -0500 (Fri, 10 Jul 2009) | 16 lines
Merged revisions 205775 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205775 | mmichelson | 2009-07-10 10:51:36 -0500 (Fri, 10 Jul 2009) | 10 lines
Ensure that outbound NOTIFY requests are properly routed through stateful proxies.
With this change, we make note of Record-Route headers present in any SUBSCRIBE
request that we receive so that our outbound NOTIFY requests will have the proper
Route headers in them.
(closes issue #14725)
Reported by: ibc
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205778 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205696 | kpfleming | 2009-07-09 16:20:23 -0500 (Thu, 09 Jul 2009) | 16 lines
Repair ability of SendFAX/ReceiveFAX to respond to T.38 switchover.
Recent changes in T.38 negotiation in Asterisk caused these applications to
not respond when the other endpoint initiated a switchover to T.38; this
resulted in the T.38 switchover failing, and the FAX attempt to be made
using an audio connection, instead of T.38 (which would usually cause the
FAX to fail completely).
This patch corrects this problem, and the applications will now correctly
respond to the T.38 switchover request. In addition, the response will include
the appopriate T.38 session parameters based on what the other end offered
and what our end is capable of.
(closes issue #14849)
Reported by: afosorio
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204301 | mmichelson | 2009-06-29 17:50:35 -0500 (Mon, 29 Jun 2009) | 15 lines
Merged revisions 204300 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204300 | mmichelson | 2009-06-29 17:45:34 -0500 (Mon, 29 Jun 2009) | 9 lines
Add error message so that it is clear why a SIP peer was not processed when
a DNS lookup fails on a host or outboundproxy.
(closes issue #13432)
Reported by: p_lindheimer
Patches:
outboundproxy.patch uploaded by p (license 558)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@204303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204247 | mmichelson | 2009-06-29 16:48:54 -0500 (Mon, 29 Jun 2009) | 32 lines
Merged revisions 204243,204246 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204243 | mmichelson | 2009-06-29 16:23:43 -0500 (Mon, 29 Jun 2009) | 22 lines
Fix a problem where chan_sip would ignore "old" but valid responses.
chan_sip has had a problem for quite a long time that would manifest when
Asterisk would send multiple SIP responses on the same dialog before receiving
a response. The problem occurred because chan_sip only kept track of the highest
outgoing sequence number used on the dialog. If Asterisk sent two requests out,
and a response arrived for the first request sent, then Asterisk would ignore
the response. The result was that Asterisk would continue retransmitting the
requests and ignoring the responses until the maximum number of retransmissions
had been reached.
The fix here is to rearrange the code a bit so that instead of simply comparing
the sequence number of the response to our latest outgoing sequence number, we
walk our list of outstanding packets and determine if there is a match. If there is,
we continue. If not, then we ignore the response.
In doing this, I found a few completely useless variables that I have now removed.
(closes issue #11231)
Reported by: flefoll
Review: https://reviewboard.asterisk.org/r/298
........
r204246 | mmichelson | 2009-06-29 16:37:05 -0500 (Mon, 29 Jun 2009) | 3 lines
Fix build oops.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@204249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r203116 | russell | 2009-06-25 11:04:10 -0500 (Thu, 25 Jun 2009) | 18 lines
Merged revisions 203115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203115 | russell | 2009-06-25 11:02:16 -0500 (Thu, 25 Jun 2009) | 11 lines
Resolve a crash related to a T.38 reinvite race condition.
This change resolves a crash observed locally during some T.38 testing.
A call was set up using a call file, and when the T.38 reinvite came in,
the channel state was still AST_STATE_DOWN. The reason is explained by
a comment in the code that previously lived in the handling of
AST_STATE_RINGING. This change modifies the logic to handle the same
race condition for any channel state that is not UP.
(closes ABE-1895)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@203118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
