https://origsvn.digium.com/svn/asterisk/trunk
................
r257493 | tilghman | 2010-04-15 15:30:15 -0500 (Thu, 15 Apr 2010) | 20 lines
Merged revisions 257467 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r257467 | tilghman | 2010-04-15 15:24:50 -0500 (Thu, 15 Apr 2010) | 13 lines
Don't recreate peer, when responding to a repeated deregistration attempt.
When a reply to a deregistration is lost in transmit, the client retries the
deregistration. Previously, this would cause a realtime/autocreate peer to be
loaded back into memory, after it had already been correctly purged. Instead,
we just want to resend the reply without loading the peer.
(closes issue #16908)
Reported by: kkm
Patches:
20100412__issue16908.diff.txt uploaded by tilghman (license 14)
Tested by: kkm
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@257508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r252089 | twilson | 2010-03-12 16:04:51 -0600 (Fri, 12 Mar 2010) | 20 lines
Only change the RTP ssrc when we see that it has changed
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@252135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r250481 | jpeeler | 2010-03-03 13:06:06 -0600 (Wed, 03 Mar 2010) | 22 lines
Merged revisions 250480 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r250480 | jpeeler | 2010-03-03 13:04:11 -0600 (Wed, 03 Mar 2010) | 15 lines
Make sure to clear red alarm after polarity reversal.
From the issue:
The automatic overnight line tests (or manual ones) used on UK (BT) lines causes
a red alarm on a dahdi / TDM400P connected channel. This is because the line
uses voltage tests (battery loss) and polarity reversal. The polarity reversal
causes chan_dahdi to initiate v23 CallerID processing but during this the event
DAHDI_EVENT_NOALARM is ignored so that the alarm is never cleared.
(closes issue #14163)
Reported by: jedi98
Patches:
chan_dahdi-1.4-inalarm.diff uploaded by jedi98 (license 653)
Tested by: mattbrown, Chainsaw, mikeeccleston
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@250483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r250395 | dvossel | 2010-03-03 12:03:19 -0600 (Wed, 03 Mar 2010) | 22 lines
Merged revisions 250394 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r250394 | dvossel | 2010-03-03 12:02:27 -0600 (Wed, 03 Mar 2010) | 16 lines
fixes problem with duplicate TXREQ packets
When Asterisk receives an IAX2 TXREQ packet, try_transfer()
will call store_by_transfercallno() to link the chan_iax2_pvt
struct into iax_transfercallno_pvts. If a duplicate TXREQ
packet is received for the same call, the pvt struct will be
linked into iax_transfercallno_pvts multiple times. This patch
fixes this. Thanks rain for debugging this and providing a patch!
(closes issue #16904)
Reported by: rain
Patches:
iax2-double-txreq-fix.diff uploaded by rain (license 327)
Tested by: rain, dvossel
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@250397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r249893 | dvossel | 2010-03-02 13:08:38 -0600 (Tue, 02 Mar 2010) | 11 lines
fixes adaptive jitterbuffer configuration
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@249896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r249538 | jpeeler | 2010-03-01 11:11:31 -0600 (Mon, 01 Mar 2010) | 18 lines
Merged revisions 249536 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r249536 | jpeeler | 2010-03-01 11:02:03 -0600 (Mon, 01 Mar 2010) | 11 lines
Modify queued frames from local channels to not set the other side to up
In this case, attended transfers were broken due to ast_feature_request_and_dial
detecting the channel being set to up before the answer frame could be read and
therefore failing to mark the channel as ready. This fix is a regression fix for
244785, which should continue to work properly as well.
(closes issue #16816)
Reported by: jamhed
Tested by: jamhed, corruptor
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@249548 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Following Q.931 5.2.4
When the user has determined that sufficient call information has been received the
user shall stop T302 and send CALL PROCEEDING to the network.
Previously timeouts were possible if the dialplan took a long time to issue any
response back to the network.
Verified that our local TELCO also does the same.
(issue #16789)
Reported by: alecdavis
Patches:
overlap_receiving_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@249363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
(closes issue #16470)
Reported by: kjotte
........
r228798 | tilghman | 2009-11-09 01:37:52 -0600 (Mon, 09 Nov 2009) | 14 lines
Fix various problems detected with Valgrind.
* chan_console accessed pvts after deallocation.
* The module loader did not check usecount on shutdown, which led to chan_iax2
reading a timer that was already unloaded.
(closes issue #16062)
Reported by: alexanderheinz
Patches:
20091109__issue16062.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@248009 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r247914 | rmudgett | 2010-02-19 11:33:33 -0600 (Fri, 19 Feb 2010) | 62 lines
Merged revisions 247910 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r247910 | rmudgett | 2010-02-19 11:18:49 -0600 (Fri, 19 Feb 2010) | 55 lines
Merged revision 247904 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.2-...
..........
r247904 | rmudgett | 2010-02-19 10:49:44 -0600 (Fri, 19 Feb 2010) | 49 lines
Make chan_misdn DTMF processing consistent with other channel technologies.
The processing of DTMF tones on the receiving side of an ISDN channel is
inconsistent with the way it is handled in other channels, especially
DAHDI analog. This causes DTMF tones sent from an ISDN phone to be
doubled at the connected party.
We are using the following 2 options of misdn.conf
1) astdtmf=yes
2) senddtmf=yes
Option one is necessary because the asterisk DSP DTMF detection is better
than mISDN's internal DSP. Not as many false positives.
Option two is necessary to transmit DTMF tones end to end when mISDN
channels are connected to SIP channels with out of band DTMF for example.
The symptom is that DTMF tones sent by an ISDN phone are doubled on the
way through asterisk when two mISDN channels are connected with a Local
channel in between or if it is bridged to an analog channel.
The doubling of DTMF tones is because DTMF is passed inband to asterisk by
the mISDN channel and passed out of band once again after the release of
the DTMF tone. Passing it inband is wrong. Neither an analog channel nor
SIP channel passes DTMF inband if configured to inband DTMF. Analog and
SIP channels filter out the DTMF tones because they use the voice frames
returned by ast_dsp_process. But chan_misdn passes the unfiltered input
voice frames instead.
To overcome one aspect of the problem, the doubling of DTMF tones when two
mISDN channels are directly bridged, someone made an 'optimization', where
in that case the DTMF tone passed out-of-band to the peer channel is not
translated to an inband tone at the transmit side. This optimization is
bad because it does not work in general. For example, analog channels or
mISDN channels when bridged through an intermediary local channel will
generate DTMF tones from out-of-band information. Also, of course, it
must not be done when there is no inband DTMF available.
This patch fixes the issue. Now chan_misdn will filter the received
inband DTMF signal the same as other channel types.
Another change included: No need to build an extra translation path
because ast_process_dsp does it if required.
Patches:
misdn-dtmf.patch
JIRA ABE-2080
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@247946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r247787 | tilghman | 2010-02-18 15:42:53 -0600 (Thu, 18 Feb 2010) | 17 lines
If the peer record is from realtime, it could be set to 0, due to MySQL not representing NULL well in integer columns.
NULL means the value is not specified for the column, which normally means
the driver uses whatever is the default value. However, on MySQL, placing
a NULL in either a float or integer column results in a retrieval of the 0
value. Hence, users get an errant error on load. This patch suppresses
that error and makes the value as if it was not there.
Note that this cannot be done in the realtime driver, because the lack of
difference between NULL and 0 can only be intepreted correctly by the
driver itself. If we did it in the realtime driver, then it would be
effectively impossible to set any realtime field to 0, because it would act
as if the field were unspecified and possibly take on a different value.
(closes issue #16683)
Reported by: wdoekes
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@247790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r246070 | jpeeler | 2010-02-10 10:47:37 -0600 (Wed, 10 Feb 2010) | 22 lines
Change channel state on local channels for busy,answer,ring.
Previously local channels channel state never changed. This became problematic
when the state of the other side of the local channel was lost, for example
during a masquerade. Changing the state of the local channel allows for the
scenario to be detected when the channel state is set to ringing, but the peer
isn't ringing. The specific problem scenario is described in 164201. Although
this was noted on one of the issues, here is the tested dialplan verified to
work:
exten => 9700,1,Dial(Local/*9700@default&Local/0009700@default)
exten => *9700,1,Set(GLOBAL(TESTCHAN)=${CHANNEL:0:${MATH(${LEN(${CHANNEL})}-1):0:2}}1)
exten => *9700,n,wait(3) ;3 works, 1 did not
exten => *9700,n,Dial(SIP/5001)
exten => 0009700,1,Wait(1) ;1 works, 3 did not
exten => 0009700,n,ChannelRedirect(${TESTCHAN},parkedcalls,701,1)
(closes issue #14992)
Reported by: davidw
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@246072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r245793 | dvossel | 2010-02-09 17:07:17 -0600 (Tue, 09 Feb 2010) | 18 lines
Merged revisions 245792 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r245792 | dvossel | 2010-02-09 16:55:38 -0600 (Tue, 09 Feb 2010) | 12 lines
Fixes iaxs and iaxsl size off by one issue.
2^15 = 32768 which is the maximum allowed iax2 callnumber.
Creating the iaxs and iaxsl array of size 32768 means the maximum
callnumber is actually out of bounds. This causes a nasty crash.
(closes issue #15997)
Reported by: exarv
Patches:
iax_fix.diff uploaded by dvossel (license 671)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@245795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r245578 | tilghman | 2010-02-08 16:31:40 -0600 (Mon, 08 Feb 2010) | 12 lines
Actually use _ASTLDFLAGS in the main/ and channels/ Makefiles.
They were previously passed correctly, but they simply weren't used. This
caused issues with various platforms whose builds needed to pass special
linker flags via the configure script.
(closes issue #16596)
Reported by: pprindeville
Patches:
asterisk-1.6-astldflags.patch uploaded by pprindeville (license 347)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@245580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r244505 | tilghman | 2010-02-03 12:34:29 -0600 (Wed, 03 Feb 2010) | 8 lines
The chanvar= setting should inherit the entire list of variables, not just the first one.
(closes issue #16359)
Reported by: raarts
Patches:
dahdi-setvars.diff uploaded by raarts (license 937)
Tested by: raarts
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@244507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r243482 | russell | 2010-01-27 11:32:07 -0600 (Wed, 27 Jan 2010) | 13 lines
Fix the ability to specify an OSP token for an outbound IAX2 call.
When this patch was originally submitted, the code allowed for the token to be
set via a channel variable. I decided that a cleaner approach would be to
integrate it into the CHANNEL() function. Unfortunately, that is not a suitable
approach. It's not possible to get the value set on the channel soon enough
using that method. So, go back to the simple channel variable method.
(closes issue #16711)
Reported by: homesick
Patches:
iax-svn.diff uploaded by homesick (license 91)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@243484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r241314 | jpeeler | 2010-01-19 12:46:11 -0600 (Tue, 19 Jan 2010) | 20 lines
Merged revisions 241227 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r241227 | jpeeler | 2010-01-19 11:22:18 -0600 (Tue, 19 Jan 2010) | 13 lines
Fix deadlock in agent_read by removing call to agent_logoff.
One must always lock the agents list lock before the agent private. agent_read
locks the private immediately, so locking the agents list lock is not an
option (which is what agent_logoff requires). Because agent_read already
has access to the agent private all that is necessary is to do the required
hanging up that agent_logoff performed.
(closes issue #16321)
Reported by: valon24
Patches:
bug16321.patch uploaded by jpeeler (license 325)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@241317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r239427 | dvossel | 2010-01-12 10:14:41 -0600 (Tue, 12 Jan 2010) | 14 lines
fixes text support in sdp answer
The code that handled setting 'm=text' in the sdp was not executing
in the correct order. The check to see if text was needed came after
the check to add 'm=text' to the sdp, this resulted in 'm=text' always
being set to 0 because it looked like text was never required.
(closes issue #16457)
Reported by: peterj
Patches:
textportinsdp.diff uploaded by peterj (license 951)
issue16457.diff uploaded by dvossel (license 671)
Tested by: peterj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@239440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r238412 | dvossel | 2010-01-07 14:15:27 -0600 (Thu, 07 Jan 2010) | 16 lines
Merged revisions 238411 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r238411 | dvossel | 2010-01-07 14:14:25 -0600 (Thu, 07 Jan 2010) | 10 lines
fixes crash in "scheduled_destroy" in chan_iax
A signed short was used to represent a callnumber. This is makes
it possible to attempt to access the iaxs array with a negative
index.
(closes issue #16565)
Reported by: jensvb
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@238430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r236063 | dvossel | 2009-12-22 11:00:08 -0600 (Tue, 22 Dec 2009) | 18 lines
Merged revisions 236062 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236062 | dvossel | 2009-12-22 10:58:19 -0600 (Tue, 22 Dec 2009) | 11 lines
fixes issue with p->method incorrectly set to ACK
It is possible for a second ACK to come in for a retransmitted message.
If an ack does not match an unacked message in our queue, restore the previous
p->method as this ACK is completely ignored.
(closes issue #16295)
Reported by: omolenkamp
Patches:
issue16295_v2.diff uploaded by dvossel (license 671)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@236065 65c4cc65-6c06-0410-ace0-fbb531ad65f3
