The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code comes from svn/asterisk/team/russell/event_performance/.
Here is a summary of the changes that have been made, in order of both
invasiveness and performance impact, from smallest to largest.
1) Asterisk 1.6.1 introduces some additional logic to be able to handle
distributed device state. This functionality comes at a cost.
One relatively minor change in this patch is that the extra processing
required for distributed device state is now completely bypassed if
it's not needed.
2) One of the things that I noticed when profiling this code was that a
_lot_ of time was spent doing string comparisons. I changed the way
strings are represented in an event to include a hash value at the front.
So, before doing a string comparison, we do an integer comparison on the
hash.
3) Finally, the code that handles the event cache has been re-written.
I tried to do this in a such a way that it had minimal impact on the API.
I did have to change one API call, though - ast_event_queue_and_cache().
However, the way it works now is nicer, IMO. Each type of event that
can be cached (MWI, device state) has its own hash table and rules for
hashing and comparing objects. This by far made the biggest impact on
performance.
For additional details regarding this code and how it was tested, please see the
review request.
(closes issue #14738)
Reported by: russell
Review: http://reviewboard.digium.com/r/205/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@184339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to get rid of a shadow warning (but this seemed legitimate enough to fix
here instead of in my branch).
Thanks to putnopvut for taking a look as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100465 | tilghman | 2008-01-27 15:59:53 -0600 (Sun, 27 Jan 2008) | 11 lines
When deleting a task from the scheduler, ignoring the return value could
possibly cause memory to be accessed after it is freed, which causes all
sorts of random memory corruption. Instead, if a deletion fails, wait a
bit and try again (noting that another thread could change our taskid
value).
(closes issue #11386)
Reported by: flujan
Patches:
20080124__bug11386.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, flujan, stuarth`
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93182 | oej | 2007-12-17 08:15:13 +0100 (MÃ¥n, 17 Dec 2007) | 8 lines
Issue 11574: Add dependencies on res_monitor and res_features.
I wonder if Asterisk can run at all without res_features. My guess is that
there's propably a lot of more modules and the core that depends on it.
Reported by: caio1982
(closes issue #11574)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a patch for it. It replaces a bunch of simple calls to snprintf with ast_copy_string
(closes issue #10843)
Reported by: Corydon76
Patches:
2007092900_10843.diff uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83432 | russell | 2007-09-21 09:37:20 -0500 (Fri, 21 Sep 2007) | 4 lines
gcc 4.2 has a new set of warnings dealing with cosnt pointers. This set of
changes gets all of Asterisk (minus chan_alsa for now) to compile with gcc 4.2.
(closes issue #10774, patch from qwell)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79174 | file | 2007-08-13 11:18:04 -0300 (Mon, 13 Aug 2007) | 4 lines
(closes issue #10437)
Reported by: haklin
Don't set the callerid name and number a second time on a newly created channel. ast_channel_alloc itself already sets it and setting it twice would cause a memory leak.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
