This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
Replaces the never used opaque data array.
Updated stream tests to include get/set metadata and
stream clone with metadata.
Added stream metadata dump to "core show channel"
Change-Id: Id7473aa4b374d7ab53046c20e321037ba9a56863
Similar to pjproject's PJ_ASSERT_RETURN macro, this one will do the
following...
If the assert passes... NoOp
If the assert fails and AST_DEVMODE is defined, execute ast_assert()
then, if DO_CRASH isn't set, return from the calling function with
the supplied value.
If the assert fails and AST_DEVMODE is not defined, return from the
calling function with the supplied value.
The macro will execute a return without a value if one isn't suppled.
Change-Id: I0003844affeab550d5ff5bca7aa7cf8a559b873e
Core bridging and, more specifically, bridge_softmix have been
enhanced to relay received frames of type TEXT or TEXT_DATA to all
participants in a softmix bridge. res_pjsip_messaging and
chan_pjsip have been enhanced to take advantage of this so when
res_pjsip_messaging receives an in-dialog MESSAGE message from a
user in a conference call, it's relayed to all other participants
in the call.
res_pjsip_messaging already queues TEXT frames to the channel when
it receives an in-dialog MESSAGE from an endpoint and chan_pjsip
will send an MESSAGE when it gets a TEXT frame. On a normal
point-to-point call, the frames are forwarded between the two
correctly. bridge_softmix was not though so messages weren't
getting forwarded to conference bridge participants. Even if they
were, the bridging code had no way to tell the participants who
sent the message so it would look like it came from the bridge
itself.
* The TEXT frame type doesn't allow storage of any meta data, such
as sender, on the frame so a new TEXT_DATA frame type was added that
uses the new ast_msg_data structure as its payload. A channel
driver can queue a frame of that type when it receives a message
from outside. A channel driver can use it for sending messages
by implementing the new send_text_data channel tech callback and
setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech
properties. If set, the bridging/channel core will use it instead
of the original send_text callback and it will get the ast_msg_data
structure. Channel drivers aren't required to implement this. Even
if a TEXT_DATA enabled driver uses it for incoming messages, an
outgoing channel driver that doesn't will still have it's send_text
callback called with only the message text just as before.
* res_pjsip_messaging now creates a TEXT_DATA frame for incoming
in-dialog messages and sets the "from" to the display name in the
"From" header, or if that's empty, the caller id name from the
channel. This allows the chat client user to set a friendly name
for the chat.
* bridge_softmix now forwards TEXT and TEXT_DATA frames to all
participants (except the sender).
* A new function "ast_sendtext_data" was added to channel which
takes an ast_msg_data structure and calls a channel's
send_text_data callback, or if that's not defined, the original
send_text callback.
* bridge_channel now calls ast_sendtext_data for TEXT_DATA frame
types and ast_sendtext for TEXT frame types.
* chan_pjsip now uses the "from" name in the ast_msg_data structure
(if it exists) to set the "From" header display name on outgoing text
messages.
Change-Id: Idacf5900bfd5f22ab8cd235aa56dfad090d18489
Adds the ability to receive and handle incoming NACK requests if
retransmissions are enabled. If retransmissions are enabled, a data
buffer is allocated that stores packets being sent. If a NACK request
is received, the packet requested for retransmission is sent if it is
still in the buffer. In the same request, if any of the following 16
packets are marked as not received, those will be sent as well if
available, as outlined in RFC4585.
Also changes RTCP RR and SR to use media source SSRC instead of packet
source SSRC when determining which instance to use for RTCP reports.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27806 #close
Change-Id: I7f7f124af3b9d5d2fd9cffc6ba8cb48a6fff06ec
Use of extended stringfields is a temporary mechanism to avoid ABI
breakage in released branches without resorting to more inconvienient
methods.
* Collect existing extended stringfields into the parent stringfield
section of the struct.
Change-Id: I8d46d037801b4518837c3ea4b6df95ceadc9436b
When a scheduled task is created you can pass in the
AST_SIP_SCHED_TASK_TRACK flag. This new flag causes scheduling events to
be logged.
Change-Id: I91967eb3d5a220915ce86881a28af772f9a7f56b
ast_sip_push_task_synchronous() did not necessarily execute the passed in
task under the specified serializer. If the current thread is any
registered pjsip thread then it would execute the task immediately instead
of under the specified serializer. Reentrancy issues could result if the
task does not execute with the right serializer.
The original reason ast_sip_push_task_synchronous() checked to see if the
current thread was a registered pjsip thread was because of a deadlock
with masquerades and the channel technology's fixup callback
(ASTERISK_22936). A subsequent masquerade deadlock fix (ASTERISK_24356)
involving call pickups avoided the original deadlock situation entirely.
The PJSIP channel technology's fixup callback no longer needed to call
ast_sip_push_task_synchronous().
However, there are a few places where this unexpected behavior is still
required to avoid deadlocks. The pjsip monitor thread executes callbacks
that do calls to ast_sip_push_task_synchronous() that would deadlock if
the task were actually pushed to the specified serializer. I ran into one
dealing with the pubsub subscriptions where an ao2 destructor called
ast_sip_push_task_synchronous().
* Split ast_sip_push_task_synchronous() into
ast_sip_push_task_wait_servant() and ast_sip_push_task_wait_serializer().
ast_sip_push_task_wait_servant() has the old behavior of
ast_sip_push_task_synchronous(). ast_sip_push_task_wait_serializer() has
the new behavior where the task is always executed by the specified
serializer or a picked serializer if one is not passed in. Both functions
behave the same if the current thread is not a SIP servant.
* Redirected ast_sip_push_task_synchronous() to
ast_sip_push_task_wait_servant() to preserve API for released branches.
ASTERISK_26806
Change-Id: Id040fa42c0e5972f4c8deef380921461d213b9f3
* Fix the periodic interval wander because it may take significant time
between the sched thread queueing the task in the serializer and the
serializer actually executing the task. The time it takes to actually
execute the task was already taken into account.
* Pass a schtd ref to the serializer when we queue a scheduled task on
the serializer. We don't want it going away on us while it is in the
serializer queue.
* Skip the scheduled task if the task was canceled between queueing the
task to the serializer and the serializer actually executing the task.
* Reorder struct ast_sip_sched_task to avoid unnecessary padding. Removed
task_id and added next_periodic.
* Hold a ref to the passed in serializer so the serializer cannot go away
on the scheduled task.
ASTERISK_26806
Change-Id: I6c8046b75f6953792c8c30e55b836a4291143f24
* Removed several invalid uses of OBJ_NOLOCK. These uses resulted in the
'tasks' container being accessed without a lock in a multi-threaded
environment. A recipe for crashes.
* Removed needlessly obtaining schtd object references. If the caller
providing you a pointer to an object doesn't have a valid reference then
you cannot safely get one from it.
* Getting a ref to 'tasks' when you aren't copying the pointer into
another location is useless. The 'tasks' container pointer is global.
* Removed many unnecessary uses of RAII_VAR.
* Make ast_sip_schedule_task() name parameter const.
ASTERISK_26806
Change-Id: I5c62488e651314e2a1dbc01f5b078a15512d73db
There is a problem when an INVITE-with-Replaces transfer targets a channel
in a ConfBridge. The transfer will unconditionally swap out the
ConfBridge channel. Unfortunately, the ConfBridge state will not be aware
of this change. Unexpected behavior will happen as a result since
ConfBridge channels currently can only be replaced by a masquerade and not
normal bridge channel moves.
* We just need to pretend that the channel isn't in a bridge (like other
transfer methods already do) so the transfer channel will masquerade into
the ConfBridge channel.
Change-Id: I209beb0e748fa4f4b92a576f36afa8f495ba4c82
The previous payload specific feedback handling was very single
minded in that it just assumed everything should trigger a video
update. This was changed but the handling of picture loss indication
was not added. The result was that video may not flow. This change
adds it explicitly in.
Change-Id: I1894be02e39ee10a0af841b5a1dca5f0ec7d60b6
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
Adds a data buffer with a configurable size that can store different
kinds of packets (like RTP packets for retransmission). Given a number
it will store a data packet at that position relative to the others.
Given a number it will retrieve the given data packet if it is present.
This is purposely a storage of arbitrary things so it can be used not
just for RTP packets but also Asterisk frames in the future if needed.
The API does not internally use a lock, so it will be up to the user of
the API to properly protect the data buffer.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
Change-Id: Iff13c5d4795d52356959fe2a57360cd57dfade07
This change extends the existing AST_FRAME_RTCP frame type to be
able to contain additional RTCP message types, such as feedback
messages. The payload type is contained in the subclass which allows
knowing what is in the frame itself.
The RTCP feedback message type is now handled and REMB[1] messages
are raised with their containing information.
This also fixes a bug where all feedback messages were triggering
video updates instead of just FIR and FUR.
Finally RTCP frames are now passed up through the Asterisk core to
what is handling the channel, mapped appropriately in the case of
bridging, and written to an outgoing stream. Since RTCP frames are
on a per-stream basis this is only done on multistream capable
channels.
[1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
ASTERISK-27758
ASTERISK-26366
Change-Id: I680da0ad8d5059d5e9655d896fb9d92e9da8491e
This creates a separate source to 'own' symbols related to options.h and
paths.h. This significantly reduces the number of exports created by
main/asterisk.o. This change is required to eventually be able to
link unmodified Asterisk sources to utilities and/or stand-alone tests.
ASTERISK~26245
Change-Id: I5cf184f4757f9363b80c9e678bdc35c477122380
* dahdi_chan_name
* dahdi_chan_name_len
* dahdi_chan_mode
* __manager_event
* dialed_interface_info
Added comment about __progname and environ being needed for FreeBSD to
prevent accidental removal in the future.
Change-Id: I3ae026bc541cd9cb572be2ffa95fc359547642b5
If the two formats on a channel are equal, we don't transcode and since
the generic plc needs slin to work, it doesn't get invoked.
* A new configuration option "genericplc_on_equal_codecs" was added
to the "plc" section of codecs.conf to allow generic packet loss
concealment even if no transcoding was originally needed.
Transcoding via SLIN is forced in this case.
ASTERISK-27743
Change-Id: I0577026a179dea34232e63123254b4e0508378f4
This change adds a property to RTP instances to indicate that
REMB support is enabled and that sending/receiving should be
passed through.
This also enables it on video RTP instances in PJSIP if
WebRTC support is enabled.
Finally the goog-remb extension is added to the SDP using
the rtcp-fb attribute to indicate our support for it.
Details about REMB can be found on the draft document for it:
https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
Change-Id: I1902dda1c0882bd1a0d71b2f120684b44b97e789
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
This replaces AST_INLINE_API allocators in utils.h with real functions
implemented in astmm.c. Associated macro's are also moved from utils.h
to astmm.h.
Remove menuselect conflicts between MALLOC_DEBUG and DEBUG_CHAOS as they
can now be combined.
This has multiple benefits:
* Simplifies asterisk/utils.h by removing inline functions and use of
the logger.
* Removal of these inline functions decreases size of Asterisk and
module binaries by 1% or more.
* Puts memory management functions together with and without
MALLOC_DEBUG enabled, simplifying management of the code.
* Enables DEBUG_CHAOS for ASTMM_REDIRECT and bundled pjproject.
Change-Id: If9df4377f74bdbb627461b27a473123e05525887
