This takes two actions.
1. Move the reading of the alertpipe in __ast_read() to immediately before the
removal of frames from the readq. This means we won't do something silly like
read from the alertpipe, then ignore the fact that there's a frame to get from
the readq since channel's fdno is the AST_TIMING_FD.
2. When ast_settimeout() sets the rate to 0 and the timingfunc to NULL, if the
channel's fdno is the AST_TIMING_FD, then set the fdno to -1. This is because
if the rate is 0 and the timingfunc is NULL, it means that the channel's timing
fd is being invalidated, so any pending reads should not occur.
This may actually solve more issues than the referenced one below, but it's not
known at this time for sure.
(closes issue ASTERISK-19223)
reported by Frank-Michael Wittig
Review: https://reviewboard.asterisk.org/r/1779
........
Merged revisions 357761 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357762 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the change from 1.6.2 to 1.8, ast_sockaddr was introduced which changed the
behavior of ast_find_ourip such that port number was wiped out. This caused
the port in internip (which is used for Contact and Call-ID on NOTIFYs) to be
0. This change causes ast_find_ourip to be port-preserving again.
(closes issue ASTERISK-19430)
........
Merged revisions 357665 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357667 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reporter was uable to use varchar utf8_unicode_ci with cdr_adaptive_odbc, so
this patch adds those along with some other character types to the list of types
cdr_adaptive_odbc will work using the varchar conditions. The problem wasn't really
UTF8 characters as much as it was a failure to respond to the exact type that was
declared/in use on that database.
(closes issue ASTERISK-19334)
Reported By: Igor Nikolaev
Patches:
cdr_adaptive_odbc.patch uploaded by Igor Nikolaev (license 6236)
........
Merged revisions 357455 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357458 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the stack frame is allocated, we save the address to which we should
return, when the Gosub returns. However, if we just want to restore the
priority, then we need to subtract 1 before setting it. Otherwise, when
a Gosub goes to a nonexistent address, it will skip a priority in the
dialplan. This is because when we return from an application, the PBX
increments the priority for us.
........
Merged revisions 357416 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357421 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, Using "transport=" multiple times would cause them to add to one
another like allow/deny. This patch changes that behavior to simply use the transport
option specified last. Also, if no transport option is applied now, the default will
automatically be UDP.
(closes ASTERISK-19352)
Reported by: jamicque
Patches:
asterisk-19352-transport-warning-message-v1.patch uploaded by Michael L. Young (license 5026)
issueA19352_no_transport_is_udp.patch uploaded by Walter Doekes (license 5674)
Review: https://reviewboard.asterisk.org/r/1745/diff/#index_header
........
Merged revisions 357266 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357271 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to specify what kind of locking an ao2 object has when it
is allocated. The locking could be one of: MUTEX, RWLOCK, or none.
New API:
ao2_t_alloc_options()
ao2_alloc_options()
ao2_t_container_alloc_options()
ao2_container_alloc_options()
ao2_rdlock()
ao2_wrlock()
ao2_tryrdlock()
ao2_trywrlock()
The OBJ_NOLOCK and AO2_ITERATOR_DONTLOCK flags have a slight meaning
change. They no longer mean that the object is protected by an external
mechanism. They mean the lock associated with the object has already been
manually obtained by one of the ao2_lock calls. This change is necessary
for RWLOCK support since they are not reentrant. Also an operation on an
ao2 container may require promoting a read lock to a write lock by
releasing the already held read lock to re-acquire as a write lock.
Replaced API calls:
ao2_t_link_nolock()
ao2_link_nolock()
ao2_t_unlink_nolock()
ao2_unlink_nolock()
with the respective
ao2_t_link_flags()
ao2_link_flags()
ao2_t_unlink_flags()
ao2_unlink_flags()
API calls to be more flexible and to allow an anticipated enhancement to
control linking duplicate objects into a container.
The changes to format.c and format_cap.c are taking advantange of the new
ao2 locking options to simplify the use of the format capabilities
containers.
Review: https://reviewboard.asterisk.org/r/1554/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The build system has some special magic to ensure that if Asterisk is built
with --enable-dev-mode *and* DONT_OPTIMIZE, that all the source is still compiled
with the optimizer enabled (even though the result will be thrown away), because
the compiler is able to find a great deal of coding errors and bugs as a result
of running its optimizers. Unfortunately at some point this mode got broken,
and the 'throwaway' compile of the code was no longer done with the optimizer
enabled. This patch corrects that problem.
........
Merged revisions 357212 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357213 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357214 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix opaquification conversion error.
(closes issue ASTERISK-19424)
Reported by: Jeremy Pepper
Patches:
asterisk-19424-initialize_priority_regression.diff (license #5026) patch uploaded by Michael L. Young
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_iax2 to pass in the correct types.
chan_iax2 is the only consumer for the various ast_netsock_* functions in trunk
at this point, so this feels like a safe change to make.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_diversion=no will prevent Diversion headers from being added to SIP
requests. This doesn't prevent Diversion from being added with dialplan
such as with SIPAddHeader.
(closes issue ASTERISK-16862)
Reported by: rsw686
Review: https://reviewboard.asterisk.org/r/1769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r354890, a memory leak in app_voicemail was fixed by properly disposing of
the allocated heard/deleted pointers. However, there are situations,
particularly when no messages are found in a folder, where these pointers are
not allocated and not NULL. In that case, an invalid free would be attempted,
which could crash app_voicemail. As there are a number of code paths where
this could occur, this patch uses the number of messages detected in the folder
before it attempts to free the pointers. This resolves the crash detected in
the Asterisk Test Suite's check_voicemail_nominal test.
........
Merged revisions 356797 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356798 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
