https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r274280 | twilson | 2010-07-06 17:08:20 -0500 (Tue, 06 Jul 2010) | 9 lines
Add option to not do a call forward on 482 Loop Detected
Asterisk has always set up a forwarded call when receiving a 482 Loop Detected.
This prevents handling the call failure by just continuing on in the dialplan.
Since this would be a change in behavior, the new option to disable this
behavior is forwardloopdetected which defaults to 'yes'.
Review: https://reviewboard.asterisk.org/r/764/
........
(no option for trunk, just changing the behavior)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r274157 | mmichelson | 2010-07-06 09:29:23 -0500 (Tue, 06 Jul 2010) | 16 lines
Fix problem with RFC 2833 DTMF not being accepted.
A recent check was added to ensure that we did not erroneously
detect duplicate DTMF when we received packets out of order.
The problem was that the check did not account for the fact that
the seqno of an RTP stream will roll over back to 0 after hitting
65535. Now, we have a secondary check that will ensure that the
seqno rolling over will not cause us to stop accepting DTMF.
(closes issue #17571)
Reported by: mdeneen
Patches:
rtp_seqno_rollover.patch uploaded by mmichelson (license 60)
Tested by: richardf, maxochoa, JJCinAZ
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r274093 | mnicholson | 2010-07-06 08:52:28 -0500 (Tue, 06 Jul 2010) | 2 lines
Make get_member_status return QUEUE_NO_MEMBERS instead of QUEUE_NO_REACHABLE_MEMBERS to make joinempty=no work again. This regression was introduced in 273639. Also fixed whitespace.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274094 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273565 | russell | 2010-07-01 17:09:19 -0500 (Thu, 01 Jul 2010) | 7 lines
Don't return a partially initialized datastore.
If memory allocation fails in ast_strdup(), don't return a partially
initialized datastore. Bad things may happen.
(related to ABE-2415)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273474 | jpeeler | 2010-07-01 15:19:16 -0500 (Thu, 01 Jul 2010) | 14 lines
Allow admin user to join conference without using admin mode and no user pin.
Configuring the conference in meetme.conf like the following:
conf => 2345,,6666
did not prompt for pin when used without admin mode. This meant that the
conference could not be joined as an admin even if the user knew the correct
pin. The original bug report was submitted claiming that the blank user pin
should deny entry into the conference. I think a better way to handle this
would be with a feature enhancement that used the following syntax:
conf => 2345,X,6666 - where X denotes no acceptable pin allowed
(closes issue #15704)
Reported by: modelnine
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A failure when calling the get_destination can mean multiple things. If
the extension is not found, a 404 error is appropriate, but if the URI
scheme is incorrect, a 404 is not approperiate. This patch adds the
get_destination_result enum to differentiate between these and other failure
types. The only logical difference in this patch is that we now send a "416
Unsupported URI scheme" response instead of a "404" when the scheme is not
recognized. This indicates to the initiator of the INVITE to retry the request
with a correct URI.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273354 | jpeeler | 2010-07-01 10:05:43 -0500 (Thu, 01 Jul 2010) | 12 lines
Ensure channel placed in meetme in ringing state is properly hung up.
An outgoing channel placed in meetme while still ringing which was then hung up
would not exit meetme and the channel was not properly destroyed. Specifically
checking for this scenario by looking at the appropriate control frames resolves
the issue.
(closes issue #15871)
Reported by: Ivan
Patches:
meetme_congestion_trunk_v2.patch uploaded by Ivan (license 229)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273060 | tilghman | 2010-06-29 18:15:28 -0500 (Tue, 29 Jun 2010) | 10 lines
Allow the "useragent" value to be restored into memory from the realtime backend.
This value is purely informational. It does not alter configuration at all.
(closes issue #16029)
Reported by: Guggemand
Patches:
realtime-useragent.patch uploaded by Guggemand (license 897)
Tested by: Guggemand
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Otherwise, it goes to all manager sessions and may exclude the current session,
if the Events mask excludes it.
(closes issue #17504)
Reported by: rrb3942
Patches:
showdialplan_patch.diff uploaded by rrb3942 (license 1003)
Tested by: rrb3942
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 2361 section 24.4.1 send a 400 Bad Request if the request
can not be understood due to malformed syntax. Currently we
simply ignore a packet with a missing callid, to, from, or
via header. Instead of ignoring we now send the 400 Bad request.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 3261 section 8.2.2.3 states that if any unsupported options
are found in the Require header field, a "420 (Bad Extension)"
response should be sent with an Unsupported header field containing
only the unsupported options.
This is not currently being done correctly. Right now, if Asterisk
detects any unsupported sip options in a Require header the entire
list of options are returned in the Unsupported header even if some
of those options are in fact supported. This patch fixes that by
building an unsupported options character buffer when parsing the
options that can be sent with the 420 response. A unit test verifying
this functionality has been created. Some code refactoring was required.
Review: https://reviewboard.asterisk.org/r/680/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I am doing work in this function. I noticed a large number of
coding guidline fixes that needed to be made. Rather than have
those changes distract from my functional changes I decided
to separate these into a separate patch.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC3261 states that Timer A should start at 500ms (T1) by default.
In chan_sip this value initially started at 1000ms and I changed
it to 500ms recently. After doing that I noticed in my packet
captures that it still occasionally retransmitted starting at
1000ms instead of 500ms like I told it to. This occurs because
the scheduler runs in the do_monitor thread. If a new retransmission
is added while the do_monitor thread is sleeping then it may not
detect that retransmission for nearly 1000ms. To fix this I just
poke the do_monitor thread to wake up when a new packet is sent
reliably requiring retransmits. The thread then detects the new
scheduler entry and adjusts its sleep time to account for it.
Review: https://reviewboard.asterisk.org/r/747
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
