If an endpoint had previously dynamically registered a contact and the contact
information was successfully stored in astdb then upon restart the qualify
notifications would not be sent out if the qualify_frequency was set. This was
due to the fact that only permanent contacts were being checked and scheduled
for qualifies on startup. Modified the code to check and schedule all
registered contacts at startup.
(closes issue ASTERISK-23062)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/3124/
........
Merged revisions 405748 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When path support was added and contacts were made available during
request creation and transmission, the code path used by outbound
qualify support was not modified correctly and was causing request
creation to fail. This ensures that outbound request creation with only
a contact and no dialog, endpoint, or uri can succeed which restores
qualify support.
Reported by: gtjoseph
Reported by: kharwell
........
Merged revisions 405743 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal
additions in res_pjsip_registrar.c to store the path and additions in
res_pjsip_outbound_registration.c to enable advertisement of path
support to registrars and intervening proxies.
Path information is stored on contacts and is enabled via Address of
Record (AoRs) and Registration configuration sections.
While adding path support, it became necessary to be able to add SIP
supplements that handled messages outside of sessions, so a framework
for handling these types of hooks was added in parallel to the
already-existing session supplements and several senders of
out-of-dialog requests were refactored as a result.
(closes issue ASTERISK-21084)
Review: https://reviewboard.asterisk.org/r/3050/
........
Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following AMI commands:
PUT mailboxes/mailboxName
modifies mailbox state and implicitly creates new mailboxes
GET mailboxes/mailboxName
retrieves a JSON representation of a single mailbox if it exists
GET mailboxes
retrieves a JSON array of all mailboxes
DELETE mailbox/mailboxName
deletes a mailbox
Note that res_mwi_external must be loaded for these functions to
actually do anything.
Review: https://reviewboard.asterisk.org/r/3117/
........
Merged revisions 405553 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We were not including an authentication challenge when sending a 401 response
to unmatched endpoints. This was due to the conversion to use a vector for
authentication section names on an endpoint. The vector for artificial endpoints
was empty, resulting in the challenge being sent back containing no challenges.
This is worked around by placing a bogus value in the artificial endpoint's auth
vector. This value is never looked up by anything, since they instead will directly
call ast_sip_get_artificial_auth().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a few memory leaks that were found based
on a mailing list post.
1. Some JSON response messages were never freed. This was
caused by the documentation stating that message references
were stolen when in reality they were not. The code now follows
the documentation and usage has been updated.
2. HTTP response headers were never freed.
3. The variable list for wildcards paths was never freed.
(closes issue ASTERISK-23128)
Reported by: Kenneth Watson (on list)
Review: https://reviewboard.asterisk.org/r/3119/
........
Merged revisions 405325 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In https://reviewboard.asterisk.org/r/3057/, applications and functions that
manipulate CDRs were made to interact over Stasis. This was done to
synchronize manipulations of CDRs from the dialplan with the updates the
engine itself receives over the message bus.
This change rested on a faulty premise: that messages published to the CDR
topic or to a topic that forwards to the CDR topic are synchronized with the
messages handled by the CDR topic subscription in the CDR engine. This is not
the case. There is no ordering guaranteed for two messages published to the
same topic; ordering is only guaranteed if a message is published to the same
subscriber.
Stasis was modified in r405311 to allow a publisher to synchronize on the
subscriber. This patch uses that API to synchronize the CDR publishers with
the CDR engine message router, which maintains the overall topic subscription.
(closes issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405312 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an API call to Stasis that allows a publisher to publish a
stasis message that will not return until a specific subscriber handles the
message. Since a subscriber can have their own forwarding topic which orders
messages from many topics, this allows a publisher who knows of that subscriber
to synchronize to that subscriber regardless of the forwarding relationships
between topics.
This is of particular use for dialplan applications that need to synchronize
on a particular subscriber's handling of a message.
(issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_rtp_ice_start if the ice session create check list failed, start check
was never initiated and ice_started was never set to true. Upon re-entering
the function (for instance, [un]hold) it would try to create the check list
again with duplicate remote candidates.
Fixed so that if the create check list fails the necessary data structures
are properly re-initialized for any subsequent retries.
Note, it was decided to not stop ice support (by calling ast_rtp_ice_stop) on a
check list failure because it possible things might still work. However, a
debug message was added to help with any future troubleshooting.
(closes issue ASTERISK-22911)
Reported by: Vytis Valentinavičius
Patches:
works_on_my_machine.patch uploaded by xytis (license 6558)
........
Merged revisions 405234 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405235 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When waitmarked users join a ConfBridge, the conference state is transitioned
from EMPTY -> INACTIVE. In this state, the users are maintined in a waiting
users list. When a marked user joins, the ConfBridge conference transitions
from INACTIVE -> MULTI_MARKED, and all users are put onto the active list of
users. This process works correctly.
When the marked user leaves, if they are the last marked user, the MULTI_MARKED
state does the following:
(1) It plays back a message to the bridge stating that the leader has left the
conference. This requires an unlocking of the bridge.
(2) It moves waitmarked users back to the waiting list
(3) It transitions to the appropriate state: in this case, INACTIVE
However, because it plays the prompt back to the bridge before moving the users
and before finishing the state transition, this creates a race condition: with
the bridge unlocked, waitmarked users who leave the conference (or are kicked
from it) can cause a state transition of the bridge to another state before
the conference is transitioned to the INACTIVE state. This causes the state
machine to get a bit wonky, often leading to a crash when the MULTI_MARKED state
attempts to conclude its processing.
This patch fixes this problem:
(1) It prevents kicked users from being kicked again. That's just a nicety.
(2) More importantly, it fixes the race condition by only playing the prompt
once the state has transitioned correctly to INACTIVE. If waitmarked users
sneak out during the prompt being played, no harm no foul.
Review: https://reviewboard.asterisk.org/r/3108/
Note that the patch committed here is essentially the same as uploaded by
Simon Moxon on ASTERISK-22740, with the addition of the double kick prevention.
(closes issue AST-1258)
Reported by: Steve Pitts
(closes issue ASTERISK-22740)
Reported by: Simon Moxon
patches:
ASTERISK-22740.diff uploaded by Simon Moxon (license 6546)
........
Merged revisions 405215 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405216 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the 'rewrite_contact' option was enabled and a Contact header was received
which contained a '*' a crash would occur.
This change makes the res_pjsip_nat module ignore the Contact header if it
contains only a '*'.
(closes issue ASTERISK-23101)
Reported by: Matt Jordan
........
Merged revisions 405019 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The core external MWI resource provides for MWI message counts
persistence using sorcery. With sorcery, the user is able to configure
which sorcery wizzard backend to use if the default astdb is not desired.
* The core external MWI resoruce provides some debugging CLI commands
enabled by defining MWI_DEBUG_CLI.
The debugging CLI commands are:
"mwi delete all",
"mwi delete like <regex>",
"mwi delete mailbox <mailbox>",
"mwi list all",
"mwi list like <regex>",
"mwi show mailbox <mailbox>", and
"mwi update mailbox <mailbox> [<new> [<old>]]".
(closes issue AFS-43)
Review: https://reviewboard.asterisk.org/r/3061/
........
Merged revisions 404952 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Depending on which threading was loading the outbound registration it was
possible for the registration client to be allocated outside of a pj thread.
This change moves the creation inside the synchronous task where it is
guaranteed it will occur in a pj thread.
Reported by: Rob Thomas
........
Merged revisions 404923 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Upon reload the module unconditionally "unloaded" the module (freeing memory
and setting pointers to NULL) and then when attempting a "load" if the config
file had not changed then nothing would be reinitialized.
By moving the "unload" to occur conditionally (reload only) after an attempted
configuration load, but before module "loading" alleviates the issue. The module
now loads/unloads/reloads correctly.
(closes issue ASTERISK-22871)
Reported by: Matteo
........
Merged revisions 404857 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 404858 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 404859 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An md5 hash is 32 bytes long. The char buffer must be at least 33 bytes to
avoid clobbering of the stack. This patch also fixes a potential clobbering
in test_utils.c.
Thanks to Andrew Nagy for reporting and testing this out in #asterisk-dev
Reported by: Andrew Nagy
Tested by: Andrew Nagy
........
Merged revisions 404843 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI action UserEvent event response would include the action header in its
keyvalue pairs list. Adjusted the start of the header loop to skip over the
action part.
(closes issue ASTERISK-22899)
Reported by: outtolunc
Patches:
svn_manager.c.skip_action.diff.txt uploaded by outtolunc (license 5198)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dahdi show channels output slices the callerid (which is dnid copied over on
PRI channels). If the channel naming structures look like:
'DAHDI/i1/1408409XXXX-6'
then the output slices 1408409XXXX down to 1408409XXX. This patch just opens
it up to 15 chars so you can see the whole thing.
(closes issue ASTERISK-22918)
Reported by: outtolunc
Patches:
svn_chan_dahdi.c.format12_15.diff.txt uploaded by outtolunc (license 5198)
........
Merged revisions 404784 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 404785 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 404786 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
