https://origsvn.digium.com/svn/asterisk/trunk
................
r172441 | tilghman | 2009-01-29 17:15:40 -0600 (Thu, 29 Jan 2009) | 16 lines
Merged revisions 172438 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172438 | tilghman | 2009-01-29 16:54:29 -0600 (Thu, 29 Jan 2009) | 9 lines
Lose the CAP_NET_ADMIN at every fork, instead of at startup. Otherwise, if
Asterisk runs as a non-root user and the administrator does a 'restart now',
Asterisk loses the ability to set QOS on packets.
(closes issue #14004)
Reported by: nemo
Patches:
20090105__bug14004.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r168746 | murf | 2009-01-15 17:34:31 -0700 (Thu, 15 Jan 2009) | 20 lines
Merged revisions 168745 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r168745 | murf | 2009-01-15 17:19:12 -0700 (Thu, 15 Jan 2009) | 14 lines
This patch fixes a problem where a goto (or jump, in this case)
fails a consistency check because it can't find a matching
extension. The problem was a missing instruction to end
the range notation in the code where it converts the pattern
into a regex and uses the regex code to determine the match.
I tested using the AEL code the user supplied, and now,
the consistency check passes.
(closes issue #14141)
Reported by: dimas
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@168747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r166470 | mmichelson | 2008-12-22 17:25:34 -0600 (Mon, 22 Dec 2008) | 11 lines
Always use the value of the AGISIGHUP when running an AGI.
Prior to this patch, the value of AGISIGUP was not always
honored when set on a channel.
(closes issue #13711)
Reported by: fmueller
Patches:
13711.patch uploaded by putnopvut (license 60)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@166471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r166258 | russell | 2008-12-22 08:16:54 -0600 (Mon, 22 Dec 2008) | 26 lines
Remove AST_PBX_KEEPALIVE usage from res_agi.
This patch removes the usage of AST_PBX_KEEPALIVE from res_agi. The only usage
was for the AGI command, "asyncagi break". This patch removes this feature.
Normally, a feature would not be removed like this. However, this code is
broken and usage of it will result in a memory leak.
Usage of this feature will make the AGI code return a result of
AST_PBX_KEEPALIVE. The PBX handler assumes that another thread has assumed
ownership of the channel. The channel thread will exit without destroying the
channel. Unfortunately, _no_ thread has ownership of the channel at this
point. There are a couple of serious problems here:
1) The only way to recover the caller is to issue a channel redirect. This
will work, but this will be done with a masquerade, and the old ast_channel
structure will be lost.
2) Until the channel redirect happens, there is no code servicing the channel.
That means nothing is reading audio or handling events coming from the
channel. This is very bad.
The recommended way to get this same "break" functionality is to issue the
redirect while the channel is still being handled by the AGI code. That way,
there will be no memory leak, and there will be no period of time that the
channel is not being serviced.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@166259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r165318 | mmichelson | 2008-12-17 15:17:20 -0600 (Wed, 17 Dec 2008) | 15 lines
Merged revisions 165255 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r165255 | mmichelson | 2008-12-17 14:51:38 -0600 (Wed, 17 Dec 2008) | 7 lines
Fix some memory leaks found while looking at how realtime
configs are handled.
Also cleaned up some coding guidelines violations in app_realtime.c,
mostly related to spacing
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@165322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r165219 | twilson | 2008-12-17 13:55:10 -0600 (Wed, 17 Dec 2008) | 2 lines
Polycom phones close the connection after reading a little bit of the firmware files, we should stop sending in that case. Also, make that case print out a debug statement instead of a scary WARNING.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@165233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r162891 | jpeeler | 2008-12-10 16:11:46 -0600 (Wed, 10 Dec 2008) | 13 lines
Merged revisions 162874 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162874 | jpeeler | 2008-12-10 16:04:18 -0600 (Wed, 10 Dec 2008) | 5 lines
(closes issue #13229)
Reported by: clegall_proformatique
Ensure that moh_generate does not return prematurely before local_ast_moh_stop is called. Also, the sleep in mp3_spawn now only occurs for http locations since it seems to have been added originally only for failing media streams.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@162894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r162271 | murf | 2008-12-09 13:40:31 -0700 (Tue, 09 Dec 2008) | 9 lines
Merged revisions 162264 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162264 | murf | 2008-12-09 13:20:54 -0700 (Tue, 09 Dec 2008) | 1 line
In discussion with seanbright on #asterisk-dev, I have added a default rule, and an option to suppress the default rule from being generated in the flex output, for the sake of those OS's where they didn't tweak flex's ECHO macro, and the compiler doesn't like it. The regressions are OK with this.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@162272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r162079 | murf | 2008-12-09 10:18:03 -0700 (Tue, 09 Dec 2008) | 53 lines
Merged revisions 162013 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162013 | murf | 2008-12-09 09:31:55 -0700 (Tue, 09 Dec 2008) | 45 lines
(closes issue #14019)
Reported by: ckjohnsonme
Patches:
14019.diff uploaded by murf (license 17)
Tested by: ckjohnsonme, murf
This crash was the result of a few small errors that
would combine in 64-bit land to result in a crash.
32-bit land might have seen these combine to mysteriously
drop the args to an application call, in certain
circumstances.
Also, in trying to find this bug, I spotted
a situation in the flex input, where, in passing
back a 'word' to the parser, it would allocate
a buffer larger than necessary. I changed the
usage in such situations, so that strdup was
not used, but rather, an ast_malloc, followed
by ast_copy_string.
I removed a field from the pval struct, in
u2, that was never getting used, and set in
one spot in the code. I believe it was an
artifact of a previous fix to make switch
cases work invisibly with extens.
And, for goto's I removed a '!' from
before a strcmp, that has been there
since the initial merging of AEL2, that
might prevent the proper target of a
goto from being found. This was pretty
harmless on its own, as it would just
louse up a consistency check for users.
Many thanks to ckjohnsonme for providing
a simplified and complete set of information
about the bug, that helped considerably in
finding and fixing the problem.
Now, to get aelparse up and running again
in trunk, and out of its "horribly broken" state,
so I can run the regression suite!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@162080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r159818 | kpfleming | 2008-11-29 11:57:39 -0600 (Sat, 29 Nov 2008) | 18 lines
incorporates r159808 from branches/1.4:
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@159855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r158188 | seanbright | 2008-11-20 14:41:23 -0500 (Thu, 20 Nov 2008) | 10 lines
Fix one case where the application argument was not converted from a pipe to
a comma. This was causing problems with switch statements with empty expressions.
(closes issue #13901)
Reported by: smurfix
Patches:
20081118_bug13901.diff uploaded by seanbright (license 71)
Tested by: seanbright
Reviewed by: murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@158190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r157974 | kpfleming | 2008-11-19 18:08:12 -0600 (Wed, 19 Nov 2008) | 13 lines
Merged revisions 157859 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r157859 | kpfleming | 2008-11-19 15:34:47 -0600 (Wed, 19 Nov 2008) | 7 lines
the gcc optimizer frequently finds broken code (use of uninitalized variables, unreachable code, etc.), which is good. however, developers usually compile with the optimizer turned off, because if they need to debug the resulting code, optimized code makes that process very difficult. this means that we get code changes committed that weren't adequately checked over for these sorts of problems.
with this build system change, if (and only if) --enable-dev-mode was used and DONT_OPTIMIZE is turned on, when a source file is compiled it will actually be preprocessed (into a .i or .ii file), then compiled once with optimization (with the result sent to /dev/null) and again without optimization (but only if the first compile succeeded, of course).
while making these changes, i did some cleanup work in Makefile.rules to move commonly-used combinations of flag variables into their own variables, to make the file easier to read and maintain
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@157976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r157706 | kpfleming | 2008-11-19 06:42:19 -0600 (Wed, 19 Nov 2008) | 5 lines
make some corrections to the ast_agi_register_multiple(), ast_agi_unregister_multiple() and ast_agi_fdprintf() API calls to be consistent with API guidelines
also, move UPGRADE.txt to UPGRADE-1.6.txt and make the new UPGRADE.txt contain information about upgrading between Asterisk 1.6 releases
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@157738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r148200 | seanbright | 2008-10-09 20:42:13 -0400 (Thu, 09 Oct 2008) | 12 lines
Don't include logger.h in asterisk.h by default as it is causing problems building
app_voicemail. Instead, include it where it is needed. This turned out to be a
relatively minor issue because other headers include logger.h as well.
Need to test -addons before merging this back to 1.6.0.
(closes issue #13605)
Reported by: tomo1657
Patches:
13605_seanbright.diff uploaded by seanbright (license 71)
Tested by: mmichelson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@148204 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r141115 | murf | 2008-09-04 17:31:41 -0600 (Thu, 04 Sep 2008) | 78 lines
Merged revisions 141094 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141094 | murf | 2008-09-04 17:15:07 -0600 (Thu, 04 Sep 2008) | 70 lines
(closes issue #13357)
Reported by: pj
Tested by: murf
(closes issue #13416)
Reported by: yarns
Tested by: murf
If you find this message overly verbose, relax, it's probably
not meant for you. This message is meant for probably only
two people in the whole world: me, or the poor schnook that
has to maintain this code because I'm either dead or unavailable
at the moment.
This fix solves two reports, both having to do with embedding
a function call in a ${} construct. It was tricky because the
funccall syntax has parenthesis () in it. And up till now,
the 'word' token in the flex stuff didn't allow that, because
it would tend to steal the LP and RP tokens. To be truthful,
the "word" token was the trickiest, most unstable thing in
the whole lexer. I was lucky it made this long without complaints.
I had to choose every character in the pattern with extreme
care, and I knew that someday I'd have to revisit it. Well,
the day has come.
So, my brilliant idea (and I'm being modest), was to use the
surrounding ${} construct to make a state machine and capture
everything in it, no matter what it contains. But, I have to now
treat the word token like I did with comments, in that I turn
the whole thing into a state-machine sort of spec, with new
contexts "curlystate", "wordstate", and "brackstate".
Wait a minute, "brackstate"? Yes, well, it didn't take very many
regression tests to point out if I do this for ${} constructs,
I also have to do it with the $[] constructs, too.
I had to create a separate pcbstack2 and pcbstack3 because
these constructs can occur inside macro argument lists, and
when we have two state machines operating on the same structures
we'd get problems otherwise. I guess I could have stopped at
pcbstack2 and had the brackstate stuff share it, but it doesn't
hurt to be safe. So, the pcbpush and pcbpop routines also now
have versions for "2" and "3".
I had to add the {KEYWORD} construct to the initial pattern for
"word", because previously word would match stuff like "default7",
because it was a longer match than the keyword "default". But,
not any more, because the word pattern only matches only one or
two characters now, and it will always lose. So, I made it the
winner again by making an optional match on any of the keywords
before it's normal pattern.
I added another regression test to make sure we don't
lose this in future edits, and had to fix just one regression,
where it no longer reports a 'cascaded' error, which I guess
is a plus.
I've given some thought as to whether to apply these fixes to
1.4 and the 1.6.x releases, vs trunk; I decided to put it in
1.4 because one of the bug reports was against 1.4; and it
is unexpected that AEL cannot handle this situation. It actually
reduced the amount of useless "cascade" error messages that
appeared in the regressions (by one line, ehhem). There is
a possible side-effect in that it does now do more careful
checking of what's in those ${} constructs, as far as matching
parens, and brackets are concerned. Some users may find a an
insidious problem and correct it this way. This should be
exceedingly rare, I hope.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@141116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r141039 | jpeeler | 2008-09-04 12:27:56 -0500 (Thu, 04 Sep 2008) | 15 lines
Merged revisions 141028 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141028 | jpeeler | 2008-09-04 12:00:29 -0500 (Thu, 04 Sep 2008) | 7 lines
(closes issue #11979)
Fixes multiple parking problems:
Crash when executing a park on an extension dialed by AGI due to not returning the proper return code.
Crash when using a builtin feature that was a subset of a enabled dynamic feature.
Crash due to always hanging up the peer despite the fact that the peer was supposed to be parked.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@141086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r138815 | murf | 2008-08-19 09:59:12 -0600 (Tue, 19 Aug 2008) | 19 lines
These changes are in regards to bug 13249, where users are being surprised by the changes made
to the Set app in trunk/1.6.x, as they come from the 1.4 world. They are only bitten if
they write their AEL dialplan in the 1.4 world, and then carry it over to a trunk/1.6.x
installation where a "make samples" was executed, or where they hand-edited the
asterisk.conf file and added the [compat] category with app_set = 1.6 (or higher).
(this commit does not totally solve 13249, at least not yet)
The change involves issueing a single warning while the AEL file is loading, if:
1. app_set is present in the config file, and set to 1.6 or higher.
2. there are double quotes in an assignment statement (eg x = "hi there";)
3. the warning was not already issued.
The standalone app, aelparse, does not (yet) issue this warning. I'd have to
have it read in the asterisk.conf file, and that's a bit of hassle. I'll add
it if users request it, tho.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@138846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r136859 | tilghman | 2008-08-08 20:15:38 -0500 (Fri, 08 Aug 2008) | 4 lines
Update documentation as to the behavior of AGI in 1.6.0 and higher. Also, add
an OOB message that answers the question of, if AGI no longer shuts down the
connection on hangup, how will FastAGI know when to stop processing the call?
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@136860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r136746 | murf | 2008-08-07 18:48:35 -0600 (Thu, 07 Aug 2008) | 40 lines
Merged revisions 136726 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136726 | murf | 2008-08-07 18:15:34 -0600 (Thu, 07 Aug 2008) | 32 lines
(closes issue #13236)
Reported by: korihor
Wow, this one was a challenge!
I regrouped and ran a new strategy for
setting the ~~MACRO~~ value; I set it once
per extension, up near the top. It is only
set if there is a switch in the extension.
So, I had to put in a chunk of code to detect
a switch in the pval tree.
I moved the code to insert the set of ~~exten~~
up to the beginning of the gen_prios routine,
instead of down in the switch code.
I learned that I have to push the detection
of the switches down into the code, so everywhere
I create a new exten in gen_prios, I make sure
to pass onto it the values of the mother_exten
first, and the exten next.
I had to add a couple fields to the exten
struct to accomplish this, in the ael_structs.h
file. The checked field makes it so we don't
repeat the switch search if it's been done.
I also updated the regressions.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@136778 65c4cc65-6c06-0410-ace0-fbb531ad65f3
