The functions needed doesn't exist in Speex 1.05 which is what a lot of distros use.
1.2 seems to have been in beta status for years, and does include the sexy functions needed for func_speex to work.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP channel names were supposed to be unique by way of a name suffix derived from the
pointer to the channel's private data. Uniqueness was preserved on 32-bit systems, but
not on 64-bit systems. This patch, as suggested by kpfleming, replaces this suffix with
a simple incremented unsigned int.
(closes issue #15152)
Reported by: palbrecht
Review: https://reviewboard.asterisk.org/r/420/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP channel names were supposed to be unique by way of a name suffix derived from the
pointer to the channel's private data. Uniqueness was preserved on 32-bit systems, but
not on 64-bit systems. This patch, as suggested by kpfleming, replaces this suffix with
a simple incremented unsigned int.
(closes issue #15152)
Reported by: palbrecht
Review: https://reviewboard.asterisk.org/r/420/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226973 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r226889 | file | 2009-11-02 14:08:11 -0400 (Mon, 02 Nov 2009) | 11 lines
Fix a bug where the recorded privacy introduction file would not get removed if the caller hung up
while the called party had not yet answered.
This was fixed by introducing an argument to the 'n' option which, when enabled, removes the introduction
file under all scenarios. This was done to preserve the behavior that has existed for quite some time.
(closes issue #14674)
Reported by: ulogic
Patches:
bug14674.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since ISDN works like SIP and not analog ports in regard to devices, the
device state based on the ISDN channel number could not work. This has
not been an issue until the advent of PTMP NT mode. Previously, ISDN
lines were used as trunks and did not have to keep track of specific
devices.
As an interim solution until device states are properly implemented, the
channel name is being changed to the following format to use the generic
device state support:
DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
Dialplan hints would thus be:
exten => xxx,hint,DAHDI/i2/5551212
This will work with the following restrictions:
* The number of devices/phones cannot exceed the number of B channels.
(i.e., BRI has 2)
* Each device/phone can only have one number. No shared MSN's.
* The phones/devices probably should not use subaddressing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226882 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r226688 | dvossel | 2009-11-02 09:16:30 -0600 (Mon, 02 Nov 2009) | 5 lines
changes calltoken debug messages from LOG_NOTICE to LOG_DEBUG like they are supposed to be
(closes issue #16144)
Reported by: aragon
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226689 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Cleanup some flags on DAHDI PRI channel hangup. (sig_pri split)
* Make sure the outgoing flag is cleared if a new channel fails to get
created for outgoing calls.
* Remove some unused flags since sig_pri was split.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a side project I've been poking at this week. The intent is to discuss
Asterisk architecture in a top down fashion to help new developers understand how
Asterisk is put together. There is a ton of stuff to write about, so this will
just continue to evolve over time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Solaris 10 nawk doesn't lthe empty pattern ike '//' for 'always'.
Just remove that. No pattern at all always matches.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r226382 | lmadsen | 2009-10-28 15:06:13 -0500 (Wed, 28 Oct 2009) | 9 lines
Update documentation in sip.conf.sample.
Update the documentation in sip.conf.sample in order to make it more clear
that directmedia/canreinvite do not cause Asterisk to ignore reINVITEs. It
is only used to stop Asterisk from generating a reINVITE, but does not stop
it from accepting them if necessary.
(closes issue #15644)
Reported by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r226138 | tilghman | 2009-10-27 15:16:49 -0500 (Tue, 27 Oct 2009) | 7 lines
Manager output is not always NULL-terminated, so force a NULL at the end of the filestream.
(closes issue #15495)
Reported by: pdf
Patches:
20090916__issue15495.diff.txt uploaded by tilghman (license 14)
Tested by: pdf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226159 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a configuration option to SIP peers, unsolicited_mailbox, which
configures a virtual mailbox to use for received new/old MWI information. This
virtual mailbox can then be used by any device supporting MWI.
(closes issue #13028)
Reported by: AsteriskRocks
Patches:
bug_13028_chan_sip_external_mwi_20090707.patch uploaded by cmaj (license 830)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Set OSARCH to linux-gnu even if host_os is linux-gnueabi
* When checking if we are Linux, check OSARCH rather than host_os
The newer ARM ABI ("EABI") shows the OS name 'linux-gnueabi' rather than
'linux-gnu' . This patch sets OSARCH to be 'linux-gnu' even in such a case.
OSARCH is tested for the value of 'linux-gnu' in one or two places in the
tree. This patch also fixes the check libcap to check for $OSARCH rather
than $host_os .
See also: http://wiki.debian.org/ArmEabiPort
Merged revisions 225957 via svnmerge from
http://svn.digium.com/svn/asterisk/branches/1.4
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code committed in revision 225405 was broken; instead of removing the unreference code,
the logic used to decide when to do it should have been reversed. This patch corrects the
situation, and makes reference counting work properly again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ACL check in check_peer_ok was missing and has now been restored. The
missing check allowed for calls to be made on prohibited networks where an ACL
was defined in sip.conf and the allowguest option was set to off. See the AST
security advisory below for more information.
Merge code associated with AST-2009-007.
(closes issue #16091)
Reported by: thom4fun
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prefix PRI trace messages with the span number. This makes the trace
readable even when you have a multi-port device.
(closes issue #15054)
Reported by: tzafrir
Patches:
dahdi_pri_debug_spannum.diff uploaded by tzafrir (license 46)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes chan_sip to use the new astobj2 OBJ_MULTIPLE iterator support
to make pedantic mode dialog searching in find_call() not require a linear search
of all dialogs in the list of dialogs. This patch does *not* change the dialog
matching logic (more on that later), just improves the searching performance.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r225581 | kpfleming | 2009-10-23 09:00:01 -0500 (Fri, 23 Oct 2009) | 10 lines
Don't force menuselect.makeopts to be rebuilt on every build.
For some reason the menuselect.makeopts file was listed as PHONY in the Makefile,
resulting in 'make' needing to rebuild it for every build. This then resulted in
the embedded module rules being rebuilt on every build, which can be slow and is
unnecessary.
This patch fixes the problem by properly allowing 'make' to know when the
menuselect.makeopts file needs to be rebuilt (defining the proper dependencies).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the README documentation to correctly describe which CLI command you should
use when attempting to get help from the CLI.
(closes issue #16064)
Reported by: thedavidfactor
Patches:
readme.patch uploaded by thedavidfactor (license 903)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225515 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r225484 | lmadsen | 2009-10-22 16:51:52 -0500 (Thu, 22 Oct 2009) | 11 lines
Clean valgrind output by suppressing false errors.
Update valgrind.txt documentation and add valgrind.supp file in order to
allow those who are creating valgrind output to have less false errors in
the logfile.
(closes issue #16007)
Reported by: atis
Patches:
valgrind.txt.diff uploaded by atis (license 242)
asterisk2.supp uploaded by atis (license 242)
Tested by: atis, amorsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added documentation on how to create a local git repository from
SVN. This documentation was added via doxygen.
(closes issue #15814)
Reported by: tzafrir
Patches:
git-asterisk-howto uploaded by tzafrir (license 46)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What this patch fixes
1.Moves sip TCP/TLS connection setup into the TCP helper thread:
Connection setup takes awhile and before this it was being
done while holding the monitor lock.
2.Moves TCP/TLS writing to the TCP helper thread: Through the
use of a packet queue and an alert pipe, the TCP helper thread
can now be woken up to write data as well as read data.
3.Locking error: sip_xmit returned an XMIT_ERROR without giving
up the tcptls_session lock. This lock has been completely removed
from sip_xmit and placed in the new sip_tcptls_write() function.
4.Memory leak: When creating a tcptls_client the tls_cfg was alloced
but never freed unless the tcptls_session failed to start. Now the
session_args for a sip client are an ao2 object which frees the
tls_cfg on destruction.
5.Pointer to stack variable: During sip_prepare_socket the creation
of a client's ast_tcptls_session_args was done on the stack and
stored as a pointer in the newly created tcptls_session. Depending
on the events that followed, there was a slight possibility that
pointer could have been accessed after the stack returned. Given
the new changes, it is always accessed after the stack returns
which is why I found it.
Notable code changes
1.I broke tcptls.c's ast_tcptls_client_start() function into two
functions. One for creating and allocating the new tcptls_session,
and a separate one for starting and handling the new connection.
This allowed me to create the tcptls_session, launch the helper
thread, and then establish the connection within the helper thread.
2.Writes to a tcptls_session are now done within the helper thread.
This is done by using an alert pipe to wake up the thread if new
data needs to be sent. The thread's sip_threadinfo object contains
the alert pipe as well as the packet queue.
3.Since the threadinfo object contains the alert pipe, it must now be
accessed outside of the helper thread for every write (queuing of a
packet). For easy lookup, I moved the threadinfo objects from a
linked list to an ao2_container.
(closes issue #13136)
Reported by: pabelanger
Tested by: dvossel, whys
(closes issue #15894)
Reported by: dvossel
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/380/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an object is being unlinked from its container *and* being returned to
the caller, we do not want to decrement the reference count after unlinking
it from the container, as the reference that the container held is what we
are returning to the caller... and if it was the only remaining reference to
the object, that could result in the object being destroyed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
