https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r281294 | russell | 2010-08-09 07:14:34 -0500 (Mon, 09 Aug 2010) | 5 lines
Reorder some options in cdr.conf.sample.
Put all of the options that affect the contents of CDRs together, instead
of having the batch mode options in the middle of them.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
FXS lines normally connect to a telephone. However, when FXS lines are routed
to an external PBX or Key System to act as "external" or "CO" lines, it is
extremely difficult, if not impossible for the external PBX to know when
the call has been disconnected without receiving a polarity reversal on the line.
Now using answeronpolarityswitch and hanguponpolarityswitch keywords that
previously were used only for FXO ports, now applies like functionality for
an FXS port, but from the connected equipment's point of view.
(closes issue #17318)
Reported by: armeniki
Patches:
fxs_linepolarity.diff5.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/797/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for this option did not match the code. Fix that along with
some minor cleanups to the code along the way. Document a slight change in
behavior (to something that was previously undocumented) in UPGRADE.txt.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two changes here:
1. Since the externip setting can now have a port attached
to it, calling it "externip" is misleading. The option is now
documented and parsed as "externaddr." This also extends to the
"matchexterniplocally" setting. It is now documented and parsed
as "matchexternaddrlocally." The old names for the options may
still be used, but they are no longer used in the sip.conf.sample
file.
2. If no port is set for the externaddr, and UDP is the transport
to be used, then we will set the port of the externaddr to that of
the udpbindaddr. This was how things worked prior to the IPv6 merge,
so this is a regression fix.
(closes issue #17665)
Reported by: mmichelson
Patches:
17665.diff#2 uploaded by pprindeville (license 347)
Tested by: pprindeville
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip.conf configuration for the channel and for devices.
The Max-Forwards header is used to prevent loops in a SIP network. Each intermediary,
like SIP proxys and SBCs, decrement this counter and detects when it reaches zero,
at which point the SIP request is nicely killed in a SIP-friendly way.
Review: https://reviewboard.asterisk.org/r/778/
Thanks to dvossel for the review and good advice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge handling code did not properly consider feature groups when setting
parameters that would affect whether or not a native bridge would be attempted.
If DYNAMIC_FEATURES only include a feature group, a native bridge would occur
that may prevent features from working.
Fix a bug in verbose output that would show the key mapping as empty if it was
using the default mapping and not a custom mapping in the feature group.
Add feature groups to the output of "features show".
Adjust the feature execution logic to match that of the logic when executing
a feature that was not configured through a feature group.
Update features.conf.sample to show that an '=' is still required if using
the default key mapping from [applicationmap].
Finally, clean up a little bit of formatting to better coform to coding
guidelines while in the area.
(closes issue #17589)
Reported by: lmadsen
Patches:
issue_17589.rev4.txt uploaded by russell (license 2)
Tested by: russell, lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch as documented in the sample config allows one to optionally apply
white, black, or both types of filtering to manager events. The new
'eventfilter' option is set per user.
(closes issue #14861)
Reported by: fnordian
Patches:
eventfilter3.patch uploaded by fnordian (license 110),
modified by me
Review: https://reviewboard.asterisk.org/r/673/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_dahdi supports dialing configuring and dialing by device file name.
DAHDI/span-name!local!1 will use /dev/dahdi/span-name/local/1 . Likewise
it may appear in chan_dahdi.conf as 'channel => span-name!local!1'.
* A new options for chan_dahdi.conf: 'ignore_failed_channels'. Boolean.
False by default. If set, chan_dahdi will ignore failed 'channel' entries.
Handy for the above name-based syntax as it does not depend on
initialization order.
* have my_pri_make_cc_dialstring() only manupulate dial-strings of group
(gGrR) dialing, which make it lsightly more complicated.
https://reviewboard.asterisk.org/r/535/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
People expressed an interest in having access to the exact length of calls to a finer degree than seconds. See the CHANGES and UPGRADE.txt for usage also updated the sample configs to note the change.
Patch by snuffy.
(closes issue #16559)
Reported by: cianmaher
Tested by: cianmaher, snuffy
Review: https://reviewboard.asterisk.org/r/461/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to announce a call to an endpoint when there are no B
channels available. A call waiting call is a SETUP message with no B
channel selected.
Relevant specification: EN 300 056, EN 300 057, EN 300 058
For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the
"no_media_path" option.
* Returns "0" if there is a B channel associated with the call.
* Returns "1" if no B channel is associated with the call. The call is
either on hold or is a call waiting call.
If you are going to allow incoming call waiting calls then you need to use
CHANNEL(no_media_path) do determine if you must drop a call to accept the
new call.
Review: https://reviewboard.asterisk.org/r/568/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added ability to send and receive ETSI Explicit Call Transfer (ECT)
messages to eliminate tromboned calls.
Note: Asterisk already supported initiating the transfer of calls to
eliminate tromboned calls to libpri so there was nothing to do for the
asterisk portion.
Review: https://reviewboard.asterisk.org/r/520/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
directmediapermit/directmediadeny support to restrict which peers can do
directmedia based on ip address. In some networks not all phones are fully
routed, i.e. not all phones can ping each other. This patch adds a way to
restrict directmedia for certain peers between certain networks.
(closes issue #16645)
Reported by: raarts
Patches:
directmediapermit.patch uploaded by raarts (license 937)
Tested by: raarts
Review: https://reviewboard.asterisk.org/r/467/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
