This change gives framehooks a reverse-direction masquerade callback in
addition to chan_fixup_cb similar to the callback added to datastores
to handle the same situation. The new callback provides the same
parameters as the fixup callback, but is called on the new channel's
framehooks before moving framehooks from the old channel to the new
channel. This gives the framehooks an oppurtunity to decide whether
they should remain on the new channel or be removed.
This new callback is used to prevent the PJSIP T.38 framehook from
remaining on a masqueraded channel if the new channel is not also a
PJSIP channel. This was causing a crash when a local channel was
masqueraded into a PJSIP channel and the framehook was executed on the
local channel since the channel's tech private data was not structured
as expected.
Review: https://reviewboard.asterisk.org/r/4001/
........
Merged revisions 423503 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423504 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This function acts like strsep with three exceptions...
* The separator is a single character instead of a string.
* Separators inside quotes are treated literally instead of like separators.
* You can elect to have leading and trailing whitespace and quotes
stripped from the result and have '\' sequences unescaped.
Like strsep, ast_strsep maintains no internal state and you can call it
recursively using different separators on the same storage.
Also like strsep, for consistent results, consecutive separators are not
collapsed so you may get an empty string as a valid result.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3989/
........
Merged revisions 423476 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423478 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423480 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Empty here means that there are no formats in the format_cap structure
or the only format in it is the "none" format.
I've added calls to check the emptiness of a format_cap in a few places
in order to short-circuit operations that would otherwise be pointless
as well as to prevent some assertions from being triggered in cases
where channels with no formats are used.
........
Merged revisions 423414 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423415 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes made during format improvements resulted in the
recording to voicemail option 'm' of the MixMonitor app
writing a zero length duration in the msgXXXX.txt file.
This change introduces a new function ast_ratestream(),
which provides the sample rate of the format associated
with the stream, and updates the app_voicemail function
for ast_app_copy_recording_to_vm to calculate the right
duration.
Review: https://reviewboard.asterisk.org/r/3996/
ASTERISK-24328 #close
........
Merged revisions 423192 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_play_and_record_full() has a parameter called "acceptdtmf" that is a
string of acceptable DTMF digits that may be pressed by a caller to end
and accept the recording.
ARI uses this function in order to perform recording, and it provides
options for what is passed as acceptdtmf to ast_play_and_record_full().
By default, ARI passes an empty string, with the intention that no DTMF
can be used to end the recording.
The problem is that ast_play_and_record_full() attempts to be "helpful"
by setting "#" as the acceptdtmf if an empty string or NULL pointer
has been passed in. With ARI, this results in unexpected behavior
occurring if you have attempted to intercept "#" yourself in order
to perform some other manipulation of the live recording.
This change removes the "helpful" behavior by no longer accepting
"#" as a default acceptdtmf if none is specified by the caller of
ast_play_and_record_full(). This makes the ARI scenario work as
expected.
The other callers of ast_play_and_record_full() are app_voicemail
and app_minivm, and in both cases, they pass an explicit "#" to
ast_play_and_record_full() as acceptdtmf, so they are unaffected
by this change.
........
Merged revisions 422964 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422965 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a CDR is forked, a new CDR is created and appended to the CDR chain for
the Party A. The forked CDR starts life off as a clone of the last
non-finalized for the particular Party A. In the past, merely copying over
the snapshots for Party A/Party B would be sufficient. However, as the CDRs
now contain cached information from Party A - specifically application/data,
context, and extension - we need to copy that over during a fork as well.
Huzzah for unit tests catching this when the context/extension were derived
from a cached value on the CDR instead of on Party A.
........
Merged revisions 422769 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422770 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On some systems, a timeval's tv_sec/tv_usec will be unsigned lont ints, as
opposed to long ints. When the RTP engine formats these as strings, it was
previously formatting them as signed integers, which can result in some
odd negative timestamp values (particularly on 32-bit systems). This patch
formats the values as unsigned long integers.
........
Merged revisions 422766 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422767 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The context/extension in a CDR is generally considered the destination of a
call. When looking at a 2-party call CDR, users will typically be presented
with the following:
context exten channel dest_channel app data
default 1000 SIP/8675309 SIP/1000 Dial SIP/1000,,20
However, if the Dial actually takes place in a Macro, the current behaviour
in 12 will result in the following CDR:
context exten channel dest_channel app data
macro-dial s SIP/8675309 SIP/1000 Dial SIP/1000,,20
The same is true of a GoSub:
context exten channel dest_channel app data
subs dial_stuff SIP/8675309 SIP/1000 Dial SIP/1000,,20
This generally makes the context/exten fields less than useful.
It isn't hard to preserve these values in the CDR state machine; however, we
need to have something that informs us when a channel is executing a
subroutine. Prior to this patch, there isn't anything that does this.
This patch solves this problem by adding a new channel flag,
AST_FLAG_SUBROUTINE_EXEC. This flag is set on a channel when it executes a
Macro or a GoSub. The CDR engine looks for this value when updating a Party A
snapshot; if the flag is present, we don't override the context/exten on the
main CDR object. In a funny quirk, executing a hangup handler must *not* abide
by this logic, as the endbeforehexten logic assumes that the user wants to see
data that occurs in hangup logic, which includes those subroutines. Since
those execute outside of a typical Dial operation (and will typically have
their own dedicated CDR anyway), this is unlikely to cause any heartburn.
Review: https://reviewboard.asterisk.org/r/3962/
ASTERISK-24254 #close
Reported by: tm1000, Tony Lewis
Tested by: Tony Lewis
........
Merged revisions 422718 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422719 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an issue where CDRs would get stuck generating an infinite
number of CDRs, eventually crashing Asterisk (and consuming a lot of memory
along the way).
When a channel enters into a multi-party bridge, the CDR engine creates
mappings of each participant to each other participant, picking the 'A' party
as it goes. So, if we have four channels in a multi-party bridge (Alice, Bob,
Charlie, Denise), we would have something like:
Alice => Bob
Alice => Charlie
Alice => Denise
Bob => Charlie
Bob => Denise
Charlie => Denise
This works fine when participants enter the bridge a single time.
When a participant leaves a bridge, the CDRs for that channel are transitioned
to a finalized state.
The bug occurs if Bob rejoins. When the CDR engine creates mappings between the
channels, it walks through all the participants currently in the bridge, and
realizes that no one in the bridge can create a CDR with the channel (Bob).
As such it creates a new CDR for the candidate and appends it to that
candidate's chain. Unfortunately, on this particular code path, it doesn't
stop traversing the candidate's chain. Since we just added ourselves to the
chain, this causes the loop to keep going, constantly adding new CDRs.
This patch makes it so the engine bails when it creates a CDR match in this
case.
Review: https://reviewboard.asterisk.org/r/3964/
ASTERISK-24241 #close
Reported by: Deepak Singh Rawat
Tested by: Deepak Singh Rawat
ASTERISK-24208
Reported by: Frankie Chin
........
Merged revisions 422715 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422716 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds an option to the dial API that marks an outgoing dial as replacing the dialing channel for the purpose of propagating accountcode. When it is used, AST_CHANNEL_REQUESTOR_REPLACEMENT is used instead of AST_CHANNEL_REQUESTOR_BRIDGE_PEER when setting accountcodes on the involved channels with ast_channel_req_accountcodes.
Review: https://reviewboard.asterisk.org/r/3968/
........
Merged revisions 422684 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When scheduled tasks run, they are removed from the heap (or hashtab).
When a scheduled task is deleted, if the task can't be found in the
heap (or hashtab), an assertion is triggered. If DO_CRASH is enabled,
this assertion causes a crash.
The problem is, sometimes it just so happens that someone attempts
to delete a scheduled task at the time that it is running, leading
to a crash. This change corrects the issue by tracking which task
is currently running. If that task is attempted to be deleted,
then we mark the task, and then wait for the task to complete.
This way, we can be sure to coordinate task deletion and memory
freeing.
ASTERISK-24212
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/3927
........
Merged revisions 422070 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422071 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When issuing a POST /channels/{channel_id}/play on a channel that is not
yet answered, ARI is supposed to:
* Queue up an AST_CONTROL_PROGRESS on the channel
* Start up the playback of the media
Instead, we sneak an answer on the channel right before starting playing media.
This is due to ARI's usage of control_streamfile. This function implicitly
answers the channel (and doesn't give ARI the option to stop it). The answering
of the channel here is probably unnecessary:
* app_voicemail, by far the biggest consumer of this function, always answers
the channels anyway
* control stream file (in res_agi) and ControlPlayback probably shouldn't be
implicitly answering the channel. Answering should not be tied directly to
playing back media.
As it turns out, the answering of the channel here is pretty old:
356042 twilson if (ast_channel_state(chan) != AST_STATE_UP) {
3087 anthm res = ast_answer(chan);
180259 tilghman }
(As in, ancient?)
Note that others ran into this problem and commented about it on various
mailing lists.
Review: https://reviewboard.asterisk.org/r/3907/
ASTERISK-24229 #close
Reported by: Matt Jordan
........
Merged revisions 421695 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421696 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes gcc warnings that occur due to the type qualifier 'const'
being ignored on a return type of int.
ASTERISK-24246 #close
Reported by: Shaun Ruffell
patches:
0001-main-uri-Quiet-warning-about-ignored-attribute-on-re.patch uploaded by Shaun Ruffell (License 5417)
........
Merged revisions 421675 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
........
Merged revisions 421645 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421538 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the AllVariables parameter to the Status AMI action such that
if defined and set to "true", all channel variables will be reported in
the subsequent Status event(s). This parameter does not negate the
functionality of the "Variables" parameter so that global variables and
dialplan functions can be requested.
Review: https://reviewboard.asterisk.org/r/3915/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a few issues:
1) The order of Dial events have been changed when performing a call forward.
The order has now been altered to
1) Dial begins dialing channel A.
2) When A forwards the call to B, we issue the dial end event to channel
A, indicating the dial is being canceled due to a forward to B.
3) When the call to channel B occurs, we then issue a new dial begin to
channel B.
2) Call forwards are now reported on the calling channel, not the peer channel.
3) AMI DialEnd events have been altered to display the extension the call is
being forwarded to when relevant.
4) You can now get the values of channel variables for channels that are not
currently in the Stasis application. This brings the retrieval of channel
variables more in line with the rest of channel read operations since they
may be performed on channels not in Stasis.
ASTERISK-24134 #close
Reported by Matt Jordan
ASTERISK-24138 #close
Reported by Matt Jordan
Patches:
forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
Review: https://reviewboard.asterisk.org/r/3899
........
Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL typically tracks a lot of information using the unique ID of the channel.
This is typically needed due to tying events together using the linked ID of
the various channels involved in a "call", which is derived from the channel ID
of the oldest channel involved in a bridge (or in the case of a Dial, the
parent channel).
Previously, we had updated the extra fields to include the involved channel
names, but forgot to put in the unique ID. This patch corrects that error.
........
Merged revisions 421037 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421042 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a manager or CLI user attached a mixmonitor to a call running a dynamic
bridge feature while in a bridge, the feature would be interrupted and the
channel would be forcibly kicked out of the bridge (usually ending the call
during a simple 1 to 1 call). This would also occur during any similar action
that could set the unbridge soft hangup flag, so the fix for this was to
remove unbridge from the soft hangup flags and make it a separate thing all
together.
ASTERISK-24027 #close
Reported by: mjordan
Review: https://reviewboard.asterisk.org/r/3900/
........
Merged revisions 420934 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 420940 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds the ability for a user to configure
a resource list in pjsip.conf. Subscribing to this
list simultaneously subscribes the subscriber to all
resources listed. This has the potential to reduce
the amount of SIP traffic when loads of subscribers
on a system attempt to subscribe to each others' states.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed the iax.conf bandwidth option. This is the root cause of
ASTERISK-24150.
* Added checks in iax2_request() to ensure that there are actual formats
requested for the new channel to prevent any more fracks from issues like
ASTERISK-24150. This is a consequence of the iax.conf bandwidth option
not working.
* Fixed struct iax2_codec_pref.order member size mismatch issue when
converting to and from the codec preference order list passed over the
wire. In addition the values sent over the wire are now compatible with
previous Asterisk versions.
* Fixed several issues dealing with the struct iax2_codec_pref members.
Off-by-one, array limit errors, and the order/framing members always need
to be updated together.
* Made iax2_request() setup the channel's native format preference order
according to the user's wishes. The new media format strategy needs the
order specified earler.
* Fixed usage of ast_format_compatibility_bitfield2format(). The function
can return NULL if the bitfield was not associated with a function.
* Deleted dead code iax2_codec_pref_getsize() and
iax2_codec_pref_setsize().
* Made iax2_parse_allow_disallow() and iax2_codec_pref_string() call
iax2_codec_pref_to_cap() instead of inlining it.
* Made IAX_CAPABILITY_MEDBANDWIDTH, IAX_CAPABILITY_LOWBANDWIDTH, and
IAX_CAPABILITY_LOWFREE constants again as they were in Asterisk v1.8.
* Renamed prefs to prefs_global so it won't get confused with the local
pref versions.
* Fixed too small buffer in handle_cli_iax2_show_peer().
* Fixed ast_cli() calls in handle_cli_iax2_show_peer() to output complete
lines.
* Changed struct create_addr_info.prefs to be struct iax2_codec_pref as an
optimization so iax2_request() and iax2_call() do less work.
* Fixed a potential deadlock in ast_iax2_new() on an off-nominal path when
the pbx could not get started.
* Made set_config() setup a local prefs list along side the local
capability format bitfield. Once the config is loaded, then the local
copies are put into the global versions.
* Fix unininialized codec_buf in function_iaxpeer().
ASTERISK-24150 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3890/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420364 65c4cc65-6c06-0410-ace0-fbb531ad65f3
