This patch fixes issues with direct media bridges that occur after a blind
transfer. These issues were caught by the (currently failing)
pjsip/transfers/blind_transfer/caller_direct_media test.
The test currently fails primarily for two reasons:
(1) When Bob and Charlie (the transfer target and the transfer destination)
enter a bridge together, the framehook remains on the transfer target
channel until both channels are in the bridge. As it consumes voice frames,
the initial bridge type is a simple bridge. The framehook is removed when
both channels are in the bridge; however, this does not currently cause the
bridging framework to re-evaluate the bridge. This patch adds a
AST_SOFTHANGUP_UNBRIDGE poke to the transfer target channel when a
framehook is removed so the bridge can re-evaluate itself.
(2) When a channel leaves a native RTP bridge, it may be leaving due to being
hung up. Sending a re-INVITE to a channel that is about to be hung up is
not nice - in fact, there's a good chance we'll send the BYE request before
the channel has had a chance to send back a 200 OK. To be somewhat nicer,
this patch adds a function to channel.h that allows the bridging framework
to query for exactly why a channel is leaving a bridge via the channel's
soft hangup flags. This allows it to only send the re-INVITE if there's a
chance the channel will survive the native bridging experience.
Review: https://reviewboard.asterisk.org/r/3535/
........
Merged revisions 414122 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414123 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the past framehooks have had no capability to determine what frame types a hook
is actually interested in consuming. This has meant that code has had to assume they
want all frames, thus preventing native bridging.
This change adds a callback which allows a framehook to be queried for whether it
is consuming a frame of a specific type. The native RTP bridging module has also
been updated to take advantange of this, allowing native bridging to occur when
previously it would not.
ASTERISK-23497 #comment Reported by: Etienne Lessard
ASTERISK-23497 #close
Review: https://reviewboard.asterisk.org/r/3522/
........
Merged revisions 413681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the past framehooks have had no capability to determine what frame types a hook
is actually interested in consuming. This has meant that code has had to assume they
want all frames, thus preventing native bridging.
This change adds a callback which allows a framehook to be queried for whether it
is consuming a frame of a specific type. The native RTP bridging module has also
been updated to take advantange of this, allowing native bridging to occur when
previously it would not.
ASTERISK-23497 #comment Reported by: Etienne Lessard
ASTERISK-23497 #close
Review: https://reviewboard.asterisk.org/r/3522/
........
Merged revisions 413650 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
* Eliminated RAII_VAR usage in res_pjsip_messaging.c:vars_to_headers().
........
Merged revisions 413139 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413142 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413144 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When bridge locking was added for bridge snapshot creation, some
locations where bridge locking was added were not guaranteed to
actually have a bridge and locking NULL AO2 objects tends to cause
segfaults. This ensures that NULL bridges aren't locked.
........
Merged revisions 413073 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Backport -r411687 and fix the fix because content_length is the length of
out plus the length of the file controlled by fd.
When a response has an out content length of 0, fwrite would be called to
write a buffer with no data in it. This resulted in the following classic
error message:
[Apr 3 11:49:17] ERROR[26421] http.c: fwrite() failed: Success
This patch makes it so that we only attempt to write the content of out if
the out string is non-zero.
........
Merged revisions 412922 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412923 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412924 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some odd reason, loading app_mixmonitor was fine, but res_monitor was not.
This patch fixes a set of issues related to func_periodic_hook exporting the
beep functions that gets res_monitor working again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the TCP_NODELAY option to accepted connections on the HTTP
server built into Asterisk. This option disables the Nagle algorithm
which controls queueing of outbound data and in some cases can cause
delays on receipt of response by the client due to how the Nagle
algorithm interacts with TCP delayed ACK. This option is already set on
all non-HTTP AMI connections and this change would cover standard HTTP
requests, manager HTTP connections, and ARI HTTP requests and
websockets in Asterisk 12+ along with any future use of the HTTP
server.
Review: https://reviewboard.asterisk.org/r/3466/
........
Merged revisions 412745 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412748 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ASTERISK-23265/ASTERISK-23320 was fixed, it inadvertently led to realtime
features breaking. This was due to features loading prior to realtime. This
patch fixes this by loading features after loading dynamic modules.
ASTERISK-23487 #close
Reported by: Denis
Tested by: Denis
........
Merged revisions 412698 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Restore the reason value set by pbx_outgoing_attempt() to use
AST_CONTROL_xxx values as all the consumers were expecting rather than
cause codes.
* Fixed the dial routines to set cause codes for more than just
ast_request() so pbx_outgoing_attempt() reason codes will function.
* Fix inconsistent locked_channel return status in pbx_outgoing_attempt().
The chanel may not have been locked or the channel may have been a stale
pointer.
* Fixed the OutgoingSpoolFailed channel to run dialplan whenever the
dialing fails for an originate exten and 1 < synchronous.
* Fix incorrect ast_cond_wait() usage in pbx_outgoing_attempt().
Indroduced by issue ASTERISK-22212 patch.
* Made struct pbx_outgoing use the ao2 lock instead of its own lock for
the cond wait mutex. No sense in having two locks associated with the
same struct when only one is needed.
Review: https://reviewboard.asterisk.org/r/3421/
........
Merged revisions 412581 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed ast_channel_publish_dial_forward() not locking the forwarded
channel when taking the channel snapshot.
* Fixed app_dial.c:do_forward() using the wrong channel to get the
original call forwarding string.
* Removed unnecessary locking when calling ast_channel_publish_dial() and
ast_channel_publish_dial_forward() in app_dial and app_queue. Holding
channel locks when calling ast_channel_publish_dial_forward() with a
forwarded channel could result in pausing the system while the stasis bus
completes processsing a forwarded channel subscription.
Review: https://reviewboard.asterisk.org/r/3451/
........
Merged revisions 412579 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a tones URI type to the playback resource. The tone can be specified by
name (from indications.conf) or by a tone pattern. In addition, tonezone can
be specified in the URI (by appending ;tonezone=<zone>). Tones must be
stopped manually in order for a stasis control to move on from playback of
the tone. Tones may be paused, resumed, restarted, and stopped. They may
not be rewound or fast forwarded (tones can't be controlled in a way that
lets you skip around from note to note and pausing and resuming will also
restart the tone from the beginning). Tests are currently in development
for this feature (https://reviewboard.asterisk.org/r/3428/).
(closes issue ASTERISK-23433)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3427/
........
Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unused RAII_VAR() declarations. The compiler cannot catch these
because the cleanup function "references" the unused variable. Some
actually allocated and released resources that were never used.
* Fixed some whitespace issues in stasis_bridges.c.
........
Merged revisions 412399 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The failing assertion ensures that the final snapshot gets generated so
CDR records can get finalized. The only place where a channel staging
snapshot flag could be left set is in chan_sip.c:handle_request_bye().
The function could return before clearing the flag because the channel
could dissappear while the function had to have the channel unlocked.
* Fixed handle_request_bye() channel snapshot staging coverage area to not
have a return in the middle of it and be unable to clear the staging flag.
* Pushed the channel snapshot staging coverage area into
ast_rtp_instance_set_stats_vars() to ensure that the staging is not
interrutped.
* Made callers of ast_rtp_instance_set_stats_vars() not call it with any
channels or channel driver private locks held to eliminate the deadlock
potential. The callers must hold references to the passed in channel and
rtp objects.
* Eliminated sip_hangup() trying to get the bridge peer. It is futile at
this point because the channel could never be in a bridge.
Review: https://reviewboard.asterisk.org/r/3431/
........
Merged revisions 412385 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
* Removed ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and
ast_opt_internal_timing.
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411717 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Assert if a channel is destroyed but has the snapshot staging flag set.
In this case the final channel destruction snapshot would never get taken.
* Assert if what we just got out of the stasis cache is not what we were
looking for. This assert would have saved several days searching for a
bug and a lot of my hair.
* Assert if the music on hold message posts could not find the associated
channel. A crash will happen later when manager tries to send the MOH AMI
message. This assert catches the problem when the stasis message is
posted instead of by the thread processing the defective message.
* Always generate a backtrace when an ast_assert() fails.
Review: https://reviewboard.asterisk.org/r/3411/
........
Merged revisions 411701 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a response has a content length of 0, fwrite would be called to write a
buffer with no data in it. This resulted in the following classic error
message:
[Apr 3 11:49:17] ERROR[26421] http.c: fwrite() failed: Success
This patch makes it so that we only attempt to write out the content if the
calculated content_length is non-zero.
........
Merged revisions 411687 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit contains several changes to sorcery:
1) Application of sorcery configuration based on module name is automatically performed
when sorcery is opened for a module.
2) Sorcery will not attempt to apply the same wizard to an object type more than once.
3) Sorcery gives more exact results when attempting to apply a wizard, whether as the
default or based on configuration.
Sorcery unit tests still pass for me after making these changes.
Review: https://reviewboard.asterisk.org/r/3326
........
Merged revisions 411159 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch works around a problem with the HTTP body
being dropped from the response to a specific client
and under specific circumstances:
a) Client request comes from node.js user agent
"Shred" via use of swagger-client library.
b) Asterisk and Client are *not* on the same
host or TCP/IP stack
In testing this problem, it has been determined that
the write of the HTTP body is lost, even if the data
is written using low level write function. The only
solution found is to instruct the TCP stack with the
shutdown function to flush the last write and finish
the transmission. See review for more details.
ASTERISK-23548 #close
(closes issue ASTERISK-23548)
Reported by: Sam Galarneau
Review: https://reviewboard.asterisk.org/r/3402/
........
Merged revisions 411462 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411463 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411465 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On graceful shutdown, sorcery wizards are all killed off, but it is
possible for sorcery instances to still have dangling pointers after
this, possibly causing a crash. Giving the sorcery instances a reference
to their wizards ensures that the wizard reference will remain valid for
the lifetime of the sorcery instance.
Review: https://reviewboard.asterisk.org/r/3401
........
Merged revisions 411295 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix memory leak in ast_unreal_new_channels(). Made it generate the ;2
uniqueid on a stack variable instead of mallocing it.
* Made send error response to ARI and AMI requests instead of just logging
excessive uniqueid length and allowing truncation. action_originate() and
ari_channels_handle_originate_with_id().
* Fixed minor truncating uniqueid hole when generating the ;2 uniqueid
string length. Created public and internal lengths of uniqueid. The
internal length can handle a max public uniqueid plus an appended ;2.
* free() and ast_free() are NULL tolerant so they don't need a NULL test
before calling.
* Made use better struct initialization format instead of the position
dependent initialization format. Also anything not explicitly initialized
in the struct is initialized to zero by the compiler.
* Made ast_channel_internal_set_fake_ids() use the safer
ast_copy_string() instead of strncpy().
Review: https://reviewboard.asterisk.org/r/3371/
........
Merged revisions 410949 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a request was received with a Content-type of json,
the body was sent for json parsing - even if it was zero
length. This resulted in ARI requests failing that were
valid, such as a channel DELETE with no parameters. The
code has now been changed to skip json parsing with zero
content length.
(closes issue SWP-6748)
Reported by: Samuel Galarneau
Review: https://reviewboard.asterisk.org/r/3360/
........
Merged revisions 410858 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410863 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the CDR core, every channel should either be filtered out (due to being an
'internal' channel used as an implementation detail, such as playing media
back into a bridge) or it should get a CDR. Even if that CDR ends up being
discarded, we still give the channel a CDR in case we end up needing it. If we
hit a situation where a channel does not have a CDR, we should blow up in
-dev-mode. Asserts are appropriate for that.
This patch adds those asserts, as they would have quickly caught the error
fixed by r410814.
........
Merged revisions 410861 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410862 65c4cc65-6c06-0410-ace0-fbb531ad65f3
