This patch serves two purposes:
(1) It fixes some bugs with endpoint subscriptions not reporting all of the
channel events
(2) It serves as the preliminary work needed for ASTERISK-23692, which allows
for sending/receiving arbitrary out of call text messages through ARI in a
technology agnostic fashion.
The messaging functionality described on ASTERISK-23692 requires two things:
(1) The ability to send/receive messages associated with an endpoint. This is
relatively straight forwards with the endpoint core in Asterisk now.
(2) The ability to send/receive messages associated with a technology and an
arbitrary technology defined URI. This is less straight forward, as
endpoints are formed from a tech + resource pair. We don't have a
mechanism to note that a technology that *may* have endpoints exists.
This patch provides such a mechanism, and fixes a few bugs along the way.
The first major bug this patch fixes is the forwarding of channel messages
to their respective endpoints. Prior to this patch, there were two problems:
(1) Channel caching messages weren't forwarded. Thus, the endpoints missed
most of the interesting bits (such as channel creation, destruction, state
changes, etc.)
(2) Channels weren't associated with their endpoint until after creation.
This resulted in endpoints missing the channel creation message, which
limited the usefulness of the subscription in the first place (a major use
case being 'tell me when this endpoint has a channel'). Unfortunately,
this meant another parameter to ast_channel_alloc. Since not all channel
technologies support an ast_endpoint, this patch makes such a call
optional and opts for a new function, ast_channel_alloc_with_endpoint.
When endpoints are created, they will implicitly create a technology endpoint
for their technology (if one does not already exist). A technology endpoint is
special in that it has no state, cannot have channels created for it, cannot
be created explicitly, and cannot be destroyed except on shutdown. It does,
however, have all messages from other endpoints in its technology forwarded to
it.
Combined with the bug fixes, we now have Stasis messages being properly
forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar),
where bar has a single channel associated with it and foo has two channels
associated with it. The messages would be forwarded as follows:
channel PJSIP/foo-1 --
\
--> endpoint PJSIP/foo --
/ \
channel PJSIP/foo-2 -- \
---- > endpoint PJSIP
/
channel PJSIP/bar-1 -----> endpoint PJSIP/bar --
ARI, through the applications resource, can:
- subscribe to endpoint:PJSIP/foo and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo
- subscribe to endpoint:PJSIP/bar and get notifications for channels
PJSIP/bar-1 and endpoint PJSIP/bar
- subscribe to endpoint:PJSIP and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar
Note that since endpoint PJSIP never changes, it never has events itself. It
merely provides an aggregation point for all other endpoints in its technology
(which in turn aggregate all channel messages associated with that endpoint).
This patch also adds endpoints to res_xmpp and chan_motif, because the actual
messaging work will need it (messaging without XMPP is just sad).
Review: https://reviewboard.asterisk.org/r/3760/
ASTERISK-23692
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@419196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.
This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.
Review: https://reviewboard.asterisk.org/r/3724/
ASTERISK-24000 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@418756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Holding a reference to the peer during mwi subscriptions
resulted in a circular reference because the final event
message would not be sent until destruction of the peer.
Instead, pass the name of the peer to the event callback
so that it can fail gracefully after the peer has gone.
ASTERISK-23959
Review: https://reviewboard.asterisk.org/r/3754/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@418636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects two issues with the extra field information in Asterisk
12+ in channel event logs.
It is possible to inject custom values into the dialstatus provided by
ast_channel_dial_type() Stasis messages that fall outside the
enumeration allowed for the DIALSTATUS channel variable. CEL now
filters for the allowed values and ignores other values.
The "hangupsource" extra field key is always blank if the far end
channel is a chan_pjsip channel. This is because the hangupsource is
never set for the pjsip channel driver. This change sets the
hangupsource whenever a hangup is queued for chan_pjsip channels.
This corrects an issue with the pjsip channel driver where the
hangupcause information was not being set properly.
Review: https://reviewboard.asterisk.org/r/3690/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@418071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new inband_on_setup_ack option causes Asterisk to assume inband audio
may be present when a SETUP_ACKNOWLEDGE message is received.
Q.931 Section 5.1.3 says that in scenarios with overlap dialing, when a
dialtone is sent from the network side, progress indicator 8 "Inband info
now available" MAY be sent to the CPE if no digits were received with the
SETUP. It is thus implied that the ie is mandatory if digits came with
the SETUP and dialtone is needed. This option should be enabled, when the
network sends dialtone and you want to hear it, but the network doesn't
send the progress indicator when needed.
NOTE: For Q.SIG setups this option should be enabled when outgoing overlap
dialing is also enabled because Q.SIG does not send the progress indicator
with the SETUP ACK.
The commit -r413714 (AST-1338) which causes this issue was dealing with a
SIP-to-ISDN interoperability issue.
This commit is a merge of the two patches indicated below.
ASTERISK-23897 #close
Reported by: Pavel Troller
Patches:
pri-4.diff (license #6302) patch uploaded by Pavel Troller
jira_asterisk_23897_v11.patch (license #5621) patch uploaded by rmudgett
Review: https://reviewboard.asterisk.org/r/3633/
........
Merged revisions 417956 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 417957 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@417958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@417678 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is essentially a backport of a small portion of r397526 from
ASTERISK-21981. In that patch, pass through support and format attribute
negotiation was added for Opus. Part of that included being more tolerant to
whitespace in the fmtp line of an SDP; that part of the patch is being
applied here.
As the author of the backport pointed out, in SDP, the fmtp line is allowed to
include whitespace between attributes. RFC 3267 chapter 8.3 (from 2001)
includes an example for this. This was not removed in the updated RFC 4867 in
2007.
Review: https://reviewboard.asterisk.org/r/3658
#ASTERISK-23916 #close
Reported by: Alexander Traud
patches:
sdpFMTPspace_Asterisk11.patch uploaded by Alexander Traud (License 6520)
........
Merged revisions 417587 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 417588 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@417589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will drive the test on review r3419. Note that the patch for this was
done by Ben Ford, although it was slightly modified for this commit.
ASTERISK-23562
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@417399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
Note that this version of the patch, unlike r417310 in Asterisk 11, exposes
configuration options beyond just chan_sip's sip.conf. Configuration options
to configure the write timeout have also been added to pjsip.conf and ari.conf.
#ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
........
Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@417311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a framehook is removed - such as the fax gateway framehook - the bridge
framework will re-evaluate the bridge mixing technologies to see if it can
improve the bridging. When this occurs, get_rtp_info will be called to
determine if local or remote bridging can be used. Using remote bridging
will cause a fax to fail, as direct media negotiation will cause some small
number of packets to not arrive at the remote endpoint.
This patch forces local native bridging if T.38 negotiation is in progress or
has been established.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@416318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415854 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@415896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk started counting the session timer at INVITE while the other
end correctly started at 200. This meant that for short session-expiries
(90 seconds) combined with long ringing times (e.g. 30 seconds), asterisk
would wrongly assume that the timer was hit before the other end thought
it was time to send a session refresh. This resulted in prematurely
ended calls.
This changes the session timer to start counting first at 200 like RFC
says it should.
(Also removed a few excess NULL checks that would never hit, because if
they did, asterisk would have crashed already.)
ASTERISK-22551 #close
Reported by: i2045
Review: https://reviewboard.asterisk.org/r/3562/
........
Merged revisions 414620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414628 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Populate the CALLERID(ani2) value (and the special CALLINGANI2 channel
variable) with the ANI2 value in addition to the PRI specific ANI2 channel
variable.
* Made complete snapshot staging with the channel lock held. All channel
snapshots need to be done while the channel lock is held.
........
Merged revisions 414050 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
........
Merged revisions 413714 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413765 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per rfc3892, the Referred-By header in a REFER must be copied into the
referenced request (IE. The outgoing INVITE to the transfer target).
* Automatically put the Referred-By header in the outgoing INVITE message
if the SIPREFERREDBYHDR channel variable is defined with a value.
* Made chan_sip.c:get_refer_info() set SIPREFERREDBYHDR for inheritance so
chan_pjsip has a better chance to interoperate.
* Fixed refer_blind_callback() and refer_incoming_refer_request() to not
modify the data in the pointer returned by pjsip_msg_find_hdr_by_name().
It seems wrong to modify that data since the calling routine doesn't own
the buffer.
ASTERISK-23501 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/3514/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
* Eliminated RAII_VAR usage in res_pjsip_messaging.c:vars_to_headers().
........
Merged revisions 413139 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a task was in-flight which required the channel or bridge lock
it was possible for the synchronous task retrieving the call-id
to deadlock as it holds those locks.
After discussing with Mark Michelson the synchronous task was
removed and the call-id accessed directly. This should be safe as
each object involved is guaranteed to exist and the call-id will
never change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412746 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two issues when building on SmartOS:
- channels/chan_oss.c: it makes sure soundcard.h is found
- main/Makefile: only use "-Wl,--version-script" when GNU LD is used as the Sun
Linker doesn't support that. Similar checks are already used elswhere in the
Makefile
Review: https://reviewboard.asterisk.org/r/3426
ASTERISK-23576 #close
Reported by: Sebastian Wiedenroth
patches:
fix-sunos.diff uploaded by Sebastian Wiedenroth (License 6597)
........
Merged revisions 412468 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unused RAII_VAR() declarations. The compiler cannot catch these
because the cleanup function "references" the unused variable. Some
actually allocated and released resources that were never used.
* Fixed some whitespace issues in stasis_bridges.c.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The failing assertion ensures that the final snapshot gets generated so
CDR records can get finalized. The only place where a channel staging
snapshot flag could be left set is in chan_sip.c:handle_request_bye().
The function could return before clearing the flag because the channel
could dissappear while the function had to have the channel unlocked.
* Fixed handle_request_bye() channel snapshot staging coverage area to not
have a return in the middle of it and be unable to clear the staging flag.
* Pushed the channel snapshot staging coverage area into
ast_rtp_instance_set_stats_vars() to ensure that the staging is not
interrutped.
* Made callers of ast_rtp_instance_set_stats_vars() not call it with any
channels or channel driver private locks held to eliminate the deadlock
potential. The callers must hold references to the passed in channel and
rtp objects.
* Eliminated sip_hangup() trying to get the bridge peer. It is futile at
this point because the channel could never be in a bridge.
Review: https://reviewboard.asterisk.org/r/3431/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
---
r411189 | jrose | 2014-03-26 10:50:48 -0500 (Wed, 26 Mar 2014) | 12 lines
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior to this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
---
........
Merged revisions 412328 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412329 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@411717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior too this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
........
Merged revisions 411189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411190 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@411193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If update_provisional_keepalive() is called while
send_provisional_keepalive_full() is waiting on the PVT lock, then
pvt->provisional_keepalive_sched_id will be changed to a new sched_id
value by update_provisional_keepalive(), but that new sched_id then may
be overwritten with -1 by send_provisional_keepalive_full(), killing
the pvt's reference to a schedule and "leaking" the reference.
(closes issue ASTERISK-22079)
Review: https://reviewboard.asterisk.org/r/3368/
Reported by: Jamuel Starkey, Matteo, Leif Madsen, Steve Davies
Patches:
provisional_keepalive_fix.diff uploaded by Steve Davies (license 5012)
........
Merged revisions 411088 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411089 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@411091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows chan_sip to avoid creation of the channel and
consumption of associated file descriptors altogether if the inbound
request is going to be rejected anyway.
(closes issue ASTERISK-23373)
Reported by: Corey Farrell
Patches:
chan_sip-earlier-st-1.8.patch uploaded by Corey Farrell (license 5909)
chan_sip-earlier-st-11.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 410308 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 410311 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
