https://origsvn.digium.com/svn/asterisk/trunk
........
r220833 | jpeeler | 2009-09-29 11:58:29 -0500 (Tue, 29 Sep 2009) | 12 lines
Make deletion of temporary greetings work properly with IMAP_STORAGE
When imapgreetings was set to yes, the message was being deleted but wasn't
actually being expunged. When imapgreetings was set to no, the file based
message was not being deleted at all. All good now!
(closes issue #14949)
Reported by: noahisaac
Patches:
vm_tempgreeting_removal.patch uploaded by noahisaac (license 748),
modified by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@220836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r219818 | tilghman | 2009-09-22 16:43:22 -0500 (Tue, 22 Sep 2009) | 17 lines
Merged revisions 219816 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r219816 | tilghman | 2009-09-22 16:37:03 -0500 (Tue, 22 Sep 2009) | 10 lines
When IMAP variables were changed during a reload, Voicemail did not use the new values.
This change introduces a configuration version variable, which ensures that
connections with the old values are not reused but are allowed to expire
normally.
(closes issue #15934)
Reported by: viniciusfontes
Patches:
20090922__issue15934.diff.txt uploaded by tilghman (license 14)
Tested by: viniciusfontes
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@219821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r216438 | oej | 2009-09-04 16:02:34 +0200 (Fre, 04 Sep 2009) | 35 lines
Merged revisions 216430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r216430 | oej | 2009-09-04 15:45:48 +0200 (Fre, 04 Sep 2009) | 27 lines
Make apps send PROGRESS control frame for early media and fix too early media issue in SIP
The issue at hand is that some legacy (dying) PBX systems send empty media frames on PRI
links *before* any call progress. The SIP channel receives these frames and by default
signals 183 Session progress and starts sending media. This will cause phones to
play silence and ignore the later 180 ringing message. A bad user experience.
The fix is twofold:
- We discovered that asterisk apps that support early media ("noanswer") did not send
any PROGRESS frame to indicate early media. Fixed.
- We introduce a setting in chan_sip so that users can disable any relay of media frames
before the outbound channel actually indicates any sort of call progress.
In 1.4, 1.6.0 and 1.6.1, this will be disabled for backward compatibility. In later versions
of Asterisk, this will be enabled. We don't assume that it will change your Asterisk
phone experience - only for the better.
We encourage third-party application developers to make sure that if they have applications
that wants to send early media, add a PROGRESS control frame transmission to make sure that
all channel drivers actually will start sending early media. This has not been the default
in Asterisk previous to this patch, so if you got inspiration from our code, you need to
update accordingly. Sorry for the trouble and thanks for your support.
This code has been running for a few months in a large scale installation (over 250
servers with PRI and/or BRI links to old PBX systems).
That's no proof that this is an excellent patch, but, well, it's tested :-)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@216647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r215338 | dhubbard | 2009-09-01 20:16:59 -0500 (Tue, 01 Sep 2009) | 18 lines
Merged revisions 215270 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r215270 | dhubbard | 2009-09-01 18:04:52 -0500 (Tue, 01 Sep 2009) | 12 lines
Use strrchr() so SoftHangup will correctly truncate multi-hyphen channel names
In general channel names are in the form Foo/Bar-Z, but the channel name
could have multiple hyphens and look like Foo/B-a-r-Z. Use strrchr to
truncate the channel name at the last hyphen.
(closes issue #15810)
Reported by: dhubbard
Patches:
dw-softhangup-1.4.patch uploaded by dhubbard (license 733)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@215376 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r213833 | jpeeler | 2009-08-24 11:43:57 -0500 (Mon, 24 Aug 2009) | 14 lines
Fix storage of greetings when using IMAP_STORAGE
The store macro was not getting called preventing storage of IMAP greetings
at all. This has been corrected along with fixing checking if the
imapgreetings option is turned on to store the greeting in IMAP. Lastly,
the attachment filename was incorrectly using the full path instead of just
the basename, which was causing problems with retrieval of the greeting.
(closes issue #14950)
Reported by: noahisaac
(closes issue #15729)
Reported by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@213836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r213697 | kpfleming | 2009-08-21 16:39:51 -0500 (Fri, 21 Aug 2009) | 12 lines
Ensure that realtime mailboxes properly report status on subscription.
This patch modifies app_voicemail's response to mailbox status subscriptions
(via the internal event system) to ensure that a subscription triggers an
explicit poll of the mailbox, so the subscriber can get an immediate cached
event with that status. Previously, the cache was only populated with the
status of non-realtime mailboxes.
(closes issue #15717)
Reported by: natmlt
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@213698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r213404 | jpeeler | 2009-08-20 16:33:11 -0500 (Thu, 20 Aug 2009) | 12 lines
Fix greeting retrieval from IMAP
Properly check for the current voicemail state and if it doesn't exist,
create it.
(closes issue #14597)
Reported by: wtca
Patches:
14597_v2.patch uploaded by mmichelson (license 60)
Tested by: jpeeler
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@213413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r211040 | tilghman | 2009-08-07 13:17:41 -0500 (Fri, 07 Aug 2009) | 21 lines
Merged revisions 211038 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r211038 | tilghman | 2009-08-07 13:16:28 -0500 (Fri, 07 Aug 2009) | 14 lines
QUEUE_MEMBER_LIST _really_ wants the interface name, not the membername.
This is a partial revert of revision 82590, which was an attempted cleanup,
but in reality, it broke QUEUE_MEMBER_LIST, which has always been intended
as a method by which component interfaces could be queried from the queue.
Membername isn't useful here, because that field cannot be used to obtain
further information about the member. See the documentation on
QUEUE_MEMBER_LIST, RemoveQueueMember, QUEUE_MEMBER_PENALTY, and the various
AMI commands which take a member argument for further justification.
(closes issue #15664)
Reported by: rain
Patches:
app_queue-queue_member_list.diff uploaded by rain (license 327)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@211051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r209839 | russell | 2009-08-01 06:02:07 -0500 (Sat, 01 Aug 2009) | 20 lines
Merged revisions 209838 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209838 | russell | 2009-08-01 05:59:05 -0500 (Sat, 01 Aug 2009) | 13 lines
Modify how Playtones() is used in Milliwatt() to resolve gain issue.
When Milliwatt() was changed internally to use Playtones() so that the proper
tone was used, it introduced a drop in gain in the output signal. So, use
the playtones API directly and specify a volume argument such that the output
matches the gain of the original Milliwatt() code.
(closes issue #15386)
Reported by: rue_mohr
Patches:
issue_15386.rev2.diff uploaded by russell (license 2)
Tested by: rue_mohr
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@209842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r209256 | kpfleming | 2009-07-27 16:21:43 -0500 (Mon, 27 Jul 2009) | 10 lines
Make T.38 switchover in ReceiveFAX synchronous.
In receive mode, if the channel that ReceiveFAX is running on supports T.38,
we should *always* attempt to switch T.38, rather than listening for an incoming
CNG tone and only triggering on that. The channel may be using a low-bitrate
codec that distorts the CNG tone, the sending FAX endpoint may not send CNG
at all, or there could be a variety of other reasons that we don't detect it,
but in all those cases if T.38 is available we certainly want to use it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@209265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208464 | kpfleming | 2009-07-23 16:57:24 -0500 (Thu, 23 Jul 2009) | 46 lines
Rework of T.38 negotiation and UDPTL API to address interoperability problems
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@208501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208113 | qwell | 2009-07-22 16:43:57 -0500 (Wed, 22 Jul 2009) | 9 lines
Restore an int declaration on PPC platforms.
This x is one crafty little bugger...
It was used for 2 different things (one of which was only done on PPC) in 1.4.
One of the uses were removed in trunk, and with it went the declaration.
(closes issue #14038)
Reported by: ffloimair
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@208116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205780 | kpfleming | 2009-07-10 11:00:44 -0500 (Fri, 10 Jul 2009) | 11 lines
Eliminate extraneous LOG_DEBUG messages generated by app_fax.
The transmit_audio() and transmit_t38() functions in app_fax have processing
loops that are supposed to wait for frames to arrive on the channel and then
handle them, but they also have short timeouts so that the loops can have
watchdog timers and do other required processing. This commit changes the loops
to not actually call ast_read() and attempt to process the returned frame
unless a frame actually arrived, eliminating hundreds of LOG_DEBUG messages
and slightly improving performance.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@205781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205770 | kpfleming | 2009-07-10 10:28:11 -0500 (Fri, 10 Jul 2009) | 12 lines
Fix some remaining T.38 negotiation problems in app_fax.
Revision 205696 did not quite fix all the issues with the T.38 negotiation
changes and app_fax; this patch corrects them, along with a couple of other
minor issues.
(closes issue #15480)
Reported by: dimas
Patches:
test2-15480.patch uploaded by dimas (license 88)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@205773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205696 | kpfleming | 2009-07-09 16:20:23 -0500 (Thu, 09 Jul 2009) | 16 lines
Repair ability of SendFAX/ReceiveFAX to respond to T.38 switchover.
Recent changes in T.38 negotiation in Asterisk caused these applications to
not respond when the other endpoint initiated a switchover to T.38; this
resulted in the T.38 switchover failing, and the FAX attempt to be made
using an audio connection, instead of T.38 (which would usually cause the
FAX to fail completely).
This patch corrects this problem, and the applications will now correctly
respond to the T.38 switchover request. In addition, the response will include
the appopriate T.38 session parameters based on what the other end offered
and what our end is capable of.
(closes issue #14849)
Reported by: afosorio
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@205699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r205350 | mmichelson | 2009-07-08 14:26:55 -0500 (Wed, 08 Jul 2009) | 20 lines
Merged revisions 205349 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205349 | mmichelson | 2009-07-08 14:26:13 -0500 (Wed, 08 Jul 2009) | 14 lines
Prevent phantom calls to queue members.
If a caller were to hang up while a periodic announcement or position
were being said, the return value for those functions would incorrectly
indicate that the caller was still in the queue. With these changes,
the problem does not occur.
(closes issue #14631)
Reported by: latinsud
Patches:
queue_announce_ghost_call2.diff uploaded by latinsud (license 745)
(with small modification from me)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@205353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r203721 | dbrooks | 2009-06-26 15:13:51 -0500 (Fri, 26 Jun 2009) | 16 lines
Fixing voicemail's error in checking max silence vs min message length
Max silence was represented in milliseconds, yet vmminsecs (minmessage) was represented
as seconds.
Also, the inequality was reversed. The warning, if triggered, was "Max silence should
be less than minmessage or you may get empty messages", which should have been logged
if max silence was greater than minmessage, but the check was for less than.
Also, conforming if statement to coding guidelines.
closes issue #15331)
Reported by: markd
Review: https://reviewboard.asterisk.org/r/293/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.2@203731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
