a DNS lookup fails on a host or outboundproxy.
(closes issue #13432)
Reported by: p_lindheimer
Patches:
outboundproxy.patch uploaded by p (license 558)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@204300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip has had a problem for quite a long time that would manifest when
Asterisk would send multiple SIP responses on the same dialog before receiving
a response. The problem occurred because chan_sip only kept track of the highest
outgoing sequence number used on the dialog. If Asterisk sent two requests out,
and a response arrived for the first request sent, then Asterisk would ignore
the response. The result was that Asterisk would continue retransmitting the
requests and ignoring the responses until the maximum number of retransmissions
had been reached.
The fix here is to rearrange the code a bit so that instead of simply comparing
the sequence number of the response to our latest outgoing sequence number, we
walk our list of outstanding packets and determine if there is a match. If there is,
we continue. If not, then we ignore the response.
In doing this, I found a few completely useless variables that I have now removed.
(closes issue #11231)
Reported by: flefoll
Review: https://reviewboard.asterisk.org/r/298
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@204243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Using the SPINLOCK schedule delete macro can result in the iax_pvt lock
being given up. This makes it possible for the iax_pvt to dissappear
when we thought we held the mutex the entire time. To resolve this, the
iax_pvt's ref count is incremented.
(closes issue #15377)
Reported by: aragon
Patches:
iax_spin_issue_1.4.diff uploaded by dvossel (license 671)
Tested by: aragon, dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@204067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Before this patch, Asterisk unconditionally picked B channels exclusively
on the CPE side and normally allowed alternative B channels on the network
side. Now Asterisk does the opposite.
Reasons for the CPE side to normally not pick B channels exclusively:
* For CPE point-to-multipoint mode (i.e. phone side), the CPE side does
not have enough information to exclusively pick B channels. (There may be
other devices on the line.)
* Q.931 gives preference to the network side picking B channels.
* Some telcos require the CPE side to not pick B channels exclusively.
(closes issue #14383)
Reported by: mbrancaleoni
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@203908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change resolves a crash observed locally during some T.38 testing.
A call was set up using a call file, and when the T.38 reinvite came in,
the channel state was still AST_STATE_DOWN. The reason is explained by
a comment in the code that previously lived in the handling of
AST_STATE_RINGING. This change modifies the logic to handle the same
race condition for any channel state that is not UP.
(closes ABE-1895)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@203115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valid format is: pritimer=timer_name,timer_value
* Fixed segfault if the ',' is missing.
* Completely check the range returned by pri_timer2idx() to prevent
possible access outside array bounds.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@203036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a CANCEL were received by Asterisk, we would send a 487 in response
to the original INVITE and a 200 OK for the CANCEL. If there were a network
hiccup which caused the 200 OK and the 487 to be lost, then the UA communicating
with Asterisk may try to retransmit its CANCEL. Asterisk's response to this used
to be to try sending another 487 to the canceled INVITE and another 200 OK to the
CANCEL.
The problem here is that the originally-sent 487 was sent "reliably" meaning that
it will be retransmitted until it is received properly. So when we receive the second
CANCEL it is likely that the first batch of 487s we sent is still going strong and
reaches the UA. The result was that the second set of 487s would be retransmitted
constantly until the maximum number of retries had been reached.
The fix for this is that if we receive a second CANCEL for an INVITE, then we cancel
the retransmission of the first set of 487s and start a second set. This causes the
dialog to be terminated reasonably.
(closes issue #14584)
Reported by: klaus3000
Patches:
14584_v2.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@202341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a while loop in get_ip_and_port_from_sdp which was controlled
by a call to get_sdp_iterate. The loop would exit either if what we were
searching for was found or if the return was NULL. The problem is that
get_sdp_iterate never returns NULL. This means that if what we were searching
for was not present, the loop would run infinitely. This modification of the
loop fixes the problem.
(closes issue #15213)
Reported by: schmidts
(closes issue #15349)
Reported by: samy
(closes issue #14464)
Reported by: pj
(closes issue #15345)
Reported by: aragon
Patches:
sip_inf_loop.patch uploaded by mmichelson (license 60)
Tested by: aragon
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@202336 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Zombie channels could be passed, and chan_sip.c wasn't checking for it.
Could crash Asterisk. Now checking for NULL pointer.
(closes issue #15330)
Reported by: okrief
Tested by: dbrooks
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@201380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we receive a SIP reinvite, it is possible that we may not be able to process the
reinvite immediately since we have also sent a reinvite out ourselves. The problem is
that whoever sent us the reinvite may have also sent a reinvite out to another party,
and that reinvite may have succeeded.
As a result, even though we are not going to accept the reinvite we just received, it
is important for us to not have problems if we suddenly start receiving RTP from a new
source. The fix for this is to grab the media source information from the SDP of the
reinvite that we receive. This information is passed to the RTP layer so that it will
know about the alternate source for media.
Review: https://reviewboard.asterisk.org/r/252
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@197588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If we already have an address for a peer, and we are reloading the sip
configuration, try to use that address to contact the peer, instead of
getting it from the Contact.
(closes issue #15194)
Reported by: ibc
Patches:
sip.patch uploaded by eliel (license 64)
Tested by: manwe
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@197562 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The presence of rport is now stored as a separate flag. Once the dialog is setup and authenticated
(or it passes through unauthenticated) the proper nat flag is set.
(closes issue #13823)
Reported by: dimas
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@197466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are rare cases in which a frame's delivery timestamp is slightly less than the iax2_pvt's offset. This causes the pvt's timestamp to be a small negative number, but since the timestamp value is unsigned it looks like a huge positive number. This patch checks for this negative case and sets the ms to zero. A similar check is already done right below this one in the 'else' statement.
(closes issue #15032)
Reported by: guillecabeza
Patches:
chan_iax2.c.patch_timestamp uploaded by guillecabeza (license 380)
Tested by: guillecabeza
(closes issue #14216)
Reported by: Andrey Sofronov
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@195991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
IAX was not sending REGREJ to terminate invalid registrations. Instead it sent another REGAUTH if the authentication challenge failed. This caused a loop of REGREQ and REGAUTH frames.
(Related to Security fix AST-2009-001)
(closes issue #14867)
Reported by: aragon
Tested by: dvossel
(closes issue #14717)
Reported by: mobeck
Patches:
regauth_loop_update_patch.diff uploaded by dvossel (license 671)
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@194873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a bug tracker issue where people are reporting "Ghost" channels in their 'iax2 show channels' output. The confusion is caused by channels being listed as "(NONE)" with format "unknown". These are not channels of coarse. They are usually just pending registration or poke requests, but it is confusing output. To help make sense of this I have added two columns to 'iax2 show channels'. One shows the first message which started the transaction, and the second shows the last message sent by either side of the call. This helps diagnose why the entry exists and why it may not go away.
(closes issue #14207)
Reported by: clive18
Review: https://reviewboard.asterisk.org/r/246/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@194557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The loop detection/spiral detection code in chan_sip used the owner
channel's state as a criterion for determining if the incoming INVITE
is a looped request. The problem with this is that the INVITE-handling
code happens in a different thread than the thread that marks the owner
channel as being up. As a result, if a reinvite were to come in very quickly,
say from another Asterisk on the same LAN, it was possible for the reinvite
to arrive before the owner channel had been set to the up state.
This patch corrects the problem by using the invitestate of the sip_pvt
instead, since that can be guaranteed to be set correctly by the time
the reinvite arrives. Since there is a switch statement further in the
INVITE-handling code, the AST_STATE_RINGING state also checks the invitestate
of the sip_pvt in case we should actually be treating the channel as if it were
up already.
(closes issue #12215)
Reported by: jpyle
Patches:
12215_confirmed.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@194484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem was that the hangup code was setting the invitestate too early. The result of
this was that we would always send a CANCEL request, even if it was not an appropriate
time to do so (e.g. we have not yet received a provisional response for our INVITE).
Note that this same fix had been applied to trunk and the 1.6.X branches starting with
revision 155467. This is why you will see this revision being blocked from those places.
AST-216
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@193880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the state MISDN_CALLING (i.e. SETUP was sent but no answer has arrived yet),
it is not allowed to clear the call with RELEASE_COMPLETE. It must be
cleared with DISCONNECT. A RELEASE_COMPLETE is only allowed as an answer
to a SETUP. (See Q.931 ch. 5.3.2, 5.3.2.a, 5.3.2.b)
Patches:
chan-misdn-ccstate7.patch uploaded by customer.
JIRA ABE-1862
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@193613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the dialed extension and context to the chan_misdn messages warning
that the dialed number cannot be matched in the dialplan.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@193050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the fullcontact field appears in both the sippeers and the
sipregs table, then during reconstruction of the field, it will
otherwise be doubled.
(closes issue #14754)
Reported by: Alexei Gradinari
Patches:
20090506__bug14754.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@192932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
mohinterpret and mohsuggest global variables were not copied over during build_users and build_peers.
(closes issue #14728)
Reported by: dimas
Patches:
v1-14728.patch uploaded by dimas (license 88)
Tested by: dimas, dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@192213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If both sides of a Local channel were hung up at around the same time it was
possible for one thread to destroy the local private structure and have the other thread
immediately try to remove the already freed structure from the local channel list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@190286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, packetization settings were ignored and now they are not. A new
config option 'autoframing' has been added to mirror the way chan_sip handles
it. Turning on the autoframing option (available both as a global option or per
peer) overrides the local settings with the remote packetization settings.
Testing was performed with varying packetization levels with the following
codecs: ulaw, alaw, gsm, and g729.
(closes issue #12415)
Reported by: pj
Patches:
2009012200_h323packetization.diff.txt uploaded by mvanbaak (license 7),
modified by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@189991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An agent logs in by calling an extension that calls the AgentLogin app. In agents.conf ackcall=always is set, so when they get a call they have the choice to either acknowledge it or ignore it. autologoff=10 is set as well, so if the agent ignores the call over 10sec one may assume that the agent should be logged out (and in this case hungup on as well), but this was not happening.
(closes issue #14091)
Reported by: evandro
Patches:
autologoff.diff uploaded by dvossel (license 671)
Review: http://reviewboard.digium.com/r/225/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@189203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit fixes the scenario where an incoming call is authenticated
using a peer entry. Previously the channel name was created using either
the username setting from the sip.conf entry or the IP address that the
call came from. Now the channel name will be created using the peer name
itself. This commit will not change the way the channel name is generated
for users or friends.
(closes issue #14256)
Reported by: Nick_Lewis
Patches:
chan_sip.c-chname.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis, file
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@188946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
