This patch addresses two issues in ConfBridge and the channel bridge layer:
1. It fixes a race condition wherein the bridge channel could be hung up
2. It removes the deadlock avoidance from the bridging layer and makes the
bridge_pvt an ao2 ref counted object
Patch by David Vossel (mjordan was merely the commit monkey)
(issue ASTERISK-18988)
(closes issue ASTERISK-18885)
Reported by: Dmitry Melekhov
Tested by: Matt Jordan
Patches: chan_bridge_cleanup_v.diff uploaded by David Vossel (license 5628)
(closes issue ASTERISK-19100)
Reported by: Matt Jordan
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1654/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@350550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit removes the V.21 preamble detection code previously added to the
generic DSP implementation in Asterisk, and instead enhances the res_fax module
to be able to utilize V.21 preamble detection functionality made available by
FAX technology modules. This commit also adds such support to res_fax_spandsp,
which uses the Spandsp modem tone detection code to do the V.21 preamble
detection.
There should be no functional change here, other than much more reliable V.21
preamble detection (and thus T.38 gateway initiation).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@349248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, res_musiconhold existed at the same module priority level
as the timing sources that it depends on. This would cause a problem when
music on hold was reloaded, as the timing source could be changed after
res_musiconhold was processed. This patch adds a new module priority level,
AST_MODPRI_TIMING, that the various timing modules are now loaded at. This
now occurs before loading other resource modules, such that the timing source
is guaranteed to be set prior to resolving the timing source dependencies.
(closes issue ASTERISK-17474)
Reporter: Luke H
Tested by: Luke H, Vladimir Mikhelson, zzsurf, Wes Van Tlghem, elguero, Thomas Arimont
Patches:
asterisk-17474-dahdi_timing-infinite-wait-fix_v3_branch-1.8.diff uploaded by elguero (License #5026)
asterisk-17474-dahdi_timing-infinite-wait-fix_v3_branch-10.diff uploaded by elguero (License #5026)
asterisk-17474-dahdi_timing-infinite-wait-fix_v3.diff uploaded by elguero (License #5026)
Review: https://reviewboard.asterisk.org/r/1578/
........
Merged revisions 349194 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@349195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_sip gives a dialog reference to the extension state callback and
assumes that when ast_extension_state_del() returns, the callback cannot
happen anymore. Chan_sip then reduces the dialog reference count
associated with the callback. Recent changes (ASTERISK-17760) have
resulted in the potential for the callback to happen after
ast_extension_state_del() has returned. For chan_sip, this could be very
bad because the dialog pointer could have already been destroyed.
* Added ast_extension_state_add_destroy() so chan_sip can account for the
sip_pvt reference given to the extension state callback when the extension
state callback is deleted.
* Fix pbx.c awkward statecbs handling in ast_extension_state_add_destroy()
and handle_statechange() now that the struct ast_state_cb has a destructor
to call.
* Ensure that ast_extension_state_add_destroy() will never return -1 or 0
for a successful registration.
* Fixed pbx.c statecbs_cmp() to compare the correct information. The
passed in value to compare is a change_cb function pointer not an object
pointer.
* Make pbx.c ast_merge_contexts_and_delete() not perform callbacks with
AST_EXTENSION_REMOVED with locks held. Chan_sip is notorious for
deadlocking when those locks are held during the callback.
* Removed unused lock declaration for the pbx.c store_hints list.
(closes issue ASTERISK-18844)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/1635/
........
Merged revisions 348940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@348952 65c4cc65-6c06-0410-ace0-fbb531ad65f3
According to the RTP packetization documentation, and the maximum values
listed in AST_FORMAT_LIST, we should support values > that the signed
char array that ast_codec_pref makes available to store the value. All
places in the code treat the framing field as though it were an int
array instaead of a char array anyway, so this just fixes the type of
the array.
(closes issue ASTERISK-18876)
Review: https://reviewboard.asterisk.org/r/1639/
........
Merged revisions 348833 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@348845 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The STUN socket must remain open between polls or the external address
seen by the STUN server is likely to change. However, if the STUN request
poll fails then the STUN server address needs to be re-resolved and the
STUN socket needs to be closed and reopened.
* Re-resolve the STUN server address and create a new socket if the STUN
request poll fails.
* Fix ast_stun_request() return value consistency.
* Fix ast_stun_request() to check the received packet for expected message
type and transaction ID.
* Fix ast_stun_request() to read packets until timeout or an associated
response packet is found. The stun_purge_socket() hack is no longer
required.
* Reduce ast_stun_request() error messages to debug output.
* No longer pass in the destination address to ast_stun_request() if the
socket is already bound or connected to the destination.
(closes issue ASTERISK-18327)
Reported by: Wolfram Joost
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1595/
........
Merged revisions 346700 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@346701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleaning up chan_sip/tcptls file descriptor closing.
This patch attempts to eliminate various possible instances of undefined behavior caused
by invoking close/fclose in situations where fclose may have already been issued on a
tcptls_session_instance and/or closing file descriptors that don't have a valid index
for fd (-1). Thanks for more than a little help from wdoekes.
(closes issue ASTERISK-18700)
Reported by: Erik Wallin
(issue ASTERISK-18345)
Reported by: Stephane Cazelas
(issue ASTERISK-18342)
Reported by: Stephane Chazelas
Review: https://reviewboard.asterisk.org/r/1576/
........
Merged revisions 346564 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@346565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_msg_get_var function did not properly decrement
the ref count of the var it retrieves. The way this is
implemented is a bit tricky, as we must decrement the var and then
return the var's value. As long as the documentation for the
function is followed, this will not result in a dangling pointer as
the ast_msg structure owns its own reference to the var while it
exists in the var container.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@346349 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The dnsmgr refresh would always get the first address found regardless of
the original address family requested. So if you asked for only IPv4
addresses originally, you might get an IPv6 address on refresh.
* Saved the original address family requested by ast_dnsmgr_lookup() to be
used when the address is refreshed.
........
Merged revisions 345976 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@345977 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Integers should always be aligned. For some platforms (ARM, SPARC) this
is more important than for others. This changeset ensures that the
string field string lengths are aligned on *all* platforms, not just on
the SPARC for which there was a workaround. It also fixes that the
length integer can be resized to 32 bits without problems if needed.
(closes issue ASTERISK-17310)
Reported by: radael, S Adrian
Reviewed by: Tzafrir Cohen, Terry Wilson
Tested by: S Adrian
Review: https://reviewboard.asterisk.org/r/1549
........
Merged revisions 343157 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@343158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were several problems with the dynamic realtime peer/user lookup
code. The lookup logic had become rather hard to read due to lots of
incremental changes to the realtime_peer function. And, during the
addition of the sipregs functionality, several possibilities for memory
leaks had been introduced. The insecure=port matching has always been
broken for anyone using the sipregs family. And, related, the broken
implementation forced those using sipregs to *still* have an ipaddr
column on their sippeers table.
Thanks Terry Wilson for comprehensive testing and finding and fixing
unexpected behaviour from the multientry realtime call which caused
the realtime_peer to have a completely unused code path.
This changeset fixes the leaks, the lookup inconsistenties and that
you won't need an ipaddr column on your sippeers table anymore (when
you're using sipregs). Beware that when you're using sipregs, peers
with insecure=port will now start matching!
(closes issue ASTERISK-17792)
(closes issue ASTERISK-18356)
Reported by: marcelloceschia, Walter Doekes
Reviewed by: Terry Wilson
Review: https://reviewboard.asterisk.org/r/1395
........
Merged revisions 342927 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@342929 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_LIST_INSERT_BEFORE_CURRENT() could not be used twice in an iteration
or before AST_LIST_REMOVE_CURRENT() without corrupting the list.
AST_LIST_INSERT_BEFORE_CURRENT() could also corrupt the list if
AST_LIST_INSERT_BEFORE_CURRENT() or AST_LIST_REMOVE_CURRENT() is used on
the next iteration.
* Fixed cut and paste error using the wrong variable in
AST_LIST_INSERT_BEFORE_CURRENT().
* Added linked list unit tests for AST_LIST_INSERT_BEFORE_CURRENT(),
AST_LIST_APPEND_LIST(), and AST_LIST_INSERT_LIST_AFTER().
........
Merged revisions 342661 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@342662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix for ASTERISK-12715 and ASTERISK-12685 added a check for the Park
application because the channel needed to be masqueraded to prevent a
crash. Since the Park application now always masquerades the channel into
the parking lot, the special check is no longer needed. The fix also
resulted in AGI exec Park attempting to double park the call and not honor
the Park application parameters.
* Removed no longer necessary call to ast_masq_park_call() by AGI exec for
the Park application. (Reverts -r146923)
* Fix Park application to only return 0 or -1. The AGI exec Park was
causing broken pipe error messages because the Park application returned 1
on successful park.
(closes issue ASTERISK-18737)
........
Merged revisions 341717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@341718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix potential deadlocks in SIP and IAX blind transfer to parking.
* Fix SIP, IAX, DAHDI analog, and MGCP channel drivers to respect the
parkext_exclusive option with transfers (Park(,,,,,exclusive_lot)
parameter). Created ast_park_call_exten() and ast_masq_park_call_exten()
to maintian API compatibility.
* Made masq_park_call() handle a failed ast_channel_masquerade() setup.
* Reduced excessive struct parkeduser.peername[] size.
........
Merged revisions 341254 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@341255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed race between calling an AMI action callback and unregistering that
action. Refixes ASTERISK-13784 broken by ASTERISK-17785 change.
* Fixed potential memory leak if an AMI action failed to get registered
because is already was registered. Part of the ao2 conversion.
* Fixed AMI ListCommands action not walking the actions list with a lock
held.
* Fix usage of ast_strdupa() and alloca() in loops. Excess stack usage.
* Fix AMI Originate action Variable header requiring a space after the
header colon. Reported by Yaroslav Panych on the asterisk-dev list.
* Increased the number of listed variables allowed per AMI Originate
action Variable header to 64.
* Fixed AMI GetConfigJSON action output format.
* Fixed usage of res contents outside of scope in append_channel_vars().
* Fixed inconsistency of config file channelvars option. The values no
longer accumulate with every channelvars option in the config file. Only
the last value is kept to be consistent with the CLI "manager show
settings" command.
(closes issue ASTERISK-18479)
Reported by: Jaco Kroon
........
Merged revisions 340279 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@340281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r340108 | mnicholson | 2011-10-10 09:14:48 -0500 (Mon, 10 Oct 2011) | 11 lines
Load the proper XML documentation when multiple modules document the same application.
This patch adds an optional "module" attribute to the XML documentation spec
that allows the documentation processor to match apps with identical names from
different modules to their documentation. This patch also fixes a number of
bugs with the documentation processor and should make it a little more
efficient. Support for multiple languages has also been properly implemented.
ASTERISK-18130
Review: https://reviewboard.asterisk.org/r/1485/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@340109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339719 | rmudgett | 2011-10-06 17:47:50 -0500 (Thu, 06 Oct 2011) | 20 lines
Fix regression in configure script for libpri capability checks.
JIRA AST-598 added the PRI_L2_PERSISTENCE option to fix BRI PTMP TE layer
2 persistence issues with some telcos. ASTERISK-18535 attempted to fix
the unexpected requirement that libpri *must* have that feature to work
with Asterisk. The AST_EXT_LIB_SETUP_DEPENDENT lines made the PRI
optional features required. Unfortunately, I thought
AST_EXT_LIB_SETUP_DEPENDENT didn't do anything useful for libpri and
deleted those lines for libpri. The result was the HAVE_PRI_xxx defines
that control the ability to use optional libpri features were also
deleted.
* Created AST_EXT_LIB_SETUP_OPTIONAL configuration macro to allow optional
features in a library that the source code could take advantage of if the
code supports the feature.
(closes issue ASTERISK-18687)
Reported by: Norbert
Tested by: rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@339720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@337974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Security Events Framework was added in 1.8 and support was added for AMI to generate
events at that time. This patch adds support for chan_sip to generate security events.
(closes issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (license #5026) by Michael L. Young
Review: https://reviewboard.asterisk.org/r/1362/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@337595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337118 | mjordan | 2011-09-20 17:38:54 -0500 (Tue, 20 Sep 2011) | 21 lines
Fix for incorrect voicemail duration in external notifications
This patch fixes an issue where the voicemail duration was being reported
with a duration significantly less than the actual sound file duration.
Voicemails that contained mostly silence were reporting the duration of
only the sound in the file, as opposed to the duration of the file with
the silence. This patch fixes this by having two durations reported in
the __ast_play_and_record family of functions - the sound_duration and the
actual duration of the file. The sound_duration, which is optional, now
reports the duration of the sound in the file, while the actual full duration
of the file is reported in the duration parameter. This allows the voicemail
applications to use the sound_duration for minimum duration checking, while
reporting the full duration to external parties if the voicemail is kept.
(issue ASTERISK-2234)
(closes issue ASTERISK-16981)
Reported by: Mary Ciuciu, Byron Clark, Brad House, Karsten Wemheuer, KevinH
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1443
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@337120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336733 | tilghman | 2011-09-19 15:27:03 -0500 (Mon, 19 Sep 2011) | 11 lines
Various changes to allow 1.8 to compile on Mac OS X Lion (10.7)
* Makefile workaround for 10.6 extended to work on 10.7 and later.
* Now uses the 'weak' symbol for Lion systems, which no longer support
'weak_import'
Closes ASTERISK-17612.
Closes ASTERISK-18213.
Tested by: tilghman, oej.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@336734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336294 | jrose | 2011-09-16 14:53:40 -0500 (Fri, 16 Sep 2011) | 13 lines
Fix bad RTP media bridges in directmedia calls on peers separated by multiple Asterisk nodes.
In a situation involving devices on separate Asterisk trunks, the remote RTP bridge would
break when starting a call with directmedia. This patch queues a new type of control frame
so that our RTP bridge loop can properly detect when these situations occur and check to see
if peers need to be updated in order to send their media to the proper location.
(Closes issue ASTERISK-18340)
Reported by: Thomas Arimont
(Closes issue ASTERISK-17725)
Reported by: kwk
Tested by: twilson, jrose
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@336307 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335911 | rmudgett | 2011-09-14 13:21:35 -0500 (Wed, 14 Sep 2011) | 13 lines
Remove unnecessary libpri dependency checks in the configure script.
Using the --with-pri option with the configure script generated an error
about not having PRI_L2_PERSISTENCE if you did not have the absolute
latest libpri SVN checkout installed.
The AST_EXT_LIB_SETUP_DEPENDENT macro in the configure.ac script seems to
be for libraries that are dependent upon other libraries and not
necessarily for optional/added features within a library.
(closes issue ASTERISK-18535)
Reported by: Michael Keuter
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@335912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335497 | russell | 2011-09-13 02:11:36 -0500 (Tue, 13 Sep 2011) | 15 lines
Fix a crash in res_ais.
This patch resolves a crash observed in a load testing environment that
involved the use of the res_ais module. I observed some crashes where
the event delivery callback would get called, but the length parameter
incidcating how much data there was to read was 0. The code assumed
(with good reason I would think) that if this callback got called, there
was an event available to read. However, if the rare case that there's
nothing there, catch it and return instead of blowing up.
More specifically, the change always ensure that the size of the received
event in the cluster is always big enough to be a real ast_event.
Review: https://reviewboard.asterisk.org/r/1423/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@335510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@335078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334296 | rmudgett | 2011-09-02 12:10:58 -0500 (Fri, 02 Sep 2011) | 39 lines
Fix potential memory allocation failure crashes in config.c.
* Added required checks to the returned memory allocation pointers to
prevent crashes.
* Made ast_include_rename() create a replacement ast_variable list node if
the new filename is longer than the available space. Fixes potential
crash and memory leak.
* Factored out ast_variable_move() from ast_variable_update() so
ast_include_rename() can also use it when creating a replacement
ast_variable list node.
* Made the filename stuffed at the end of the struct a minimum allocated
size in ast_variable_new() in case ast_include_rename() changes the stored
filename.
* Constify struct char pointers pointing to strings stuffed at the end of
the struct for: ast_variable, cache_file_mtime, and ast_config_map.
* Factored out cfmtime_new() to remove inlined code and allow some struct
pointers to become const.
* Removed the list lock from struct cache_file_mtime that was never used.
* Added doxygen comments to several structure elements and better
documented what strings are stuffed at the struct end char array.
* Reworked ast_config_text_file_save() and set_fn() to handle allocation
failure of the include file scratch pad object tracking blank lines.
* Made ast_config_text_file_save() fn[] declared with PATH_MAX to ensure
it is long enough for any filename with path. Also reduced the number of
container fileset buckets from a rediculus 180,000 to 1023.
JIRA AST-618
Review: https://reviewboard.asterisk.org/r/1378/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@334297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332355 | tilghman | 2011-08-17 14:21:36 -0500 (Wed, 17 Aug 2011) | 10 lines
Re-add support for spaces in pathnames, including now spaces in DESTDIR.
This was initially added to 1.8 prior to release, primarily to support the
standard paths on Mac OS X, but was partially reverted recently in Subversion,
due to the lack of support for spaces in DESTDIR. This commit restores support
for the standard paths on Mac OS X, and also includes support for spaces in
DESTDIR.
(closes issue ASTERISK-18290)
Reported by: pabelanger
Review: https://reviewboard.asterisk.org/r/1326/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@332369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines
Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
France Telecom brings layer 2 and layer 1 down on BRI lines when the line
is idle. When layer 1 goes down Asterisk cannot make outgoing calls and
the HA8 and HB8 cards also get IRQ misses.
The inability to make outgoing calls is because the line is in red alarm
and Asterisk will not make calls over a line it considers unavailable.
The IRQ misses for the HA8 and HB8 card are because the hardware is
switching clock sources from the line which just brought layer 1 down to
internal timing.
There is a DAHDI option for the B410P card to not tell Asterisk that layer
1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards:
"modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear
up the IRQ misses when the telco brings layer 1 down.
* Add layer 2 persistence option to customize the layer 2 behavior on BRI
PTMP lines. The new option has three settings: 1) Use libpri default
layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer
brings it down. 3) Leave layer 2 down when the peer brings it down.
Layer 2 will be brought up as needed for outgoing calls.
JIRA AST-598
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@332265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As a result of converting Unlink events that were missed in the AMI
1.1 update to Bridge events, the AMI protocol version is being incremented.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@331097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329527 | jrose | 2011-07-26 08:25:35 -0500 (Tue, 26 Jul 2011) | 17 lines
Fixes some voicemail forwarding behavior based around prepend mode.
Formerly, prepend forwarding would have the user record a message with no useful prompt
and an expectation for the user to push a button on the phone when finished recording.
If a length of silence was detected instead, the recording would be canceled and the user
would re-enter the voicemail forwarding menu. Subsequent time-outs in prepend recording
would also bug out in the sense that they would write over the original message and get
sent to the recipient regardless of whether they timed out or were accepted. This patch
fixes this issue and adds a prompt which will be played after a timeout informing the
user that they needed to press a button. Currently, the sound files that we have are
somewhat inadquate for this, so after the call we simply have Allison say "Please try
again. Then press pound." which actually relies on two separate sound files. Just one
would be more appropriate.
reporter: Vlad Povorozniuc
Review: https://reviewboard.asterisk.org/r/1327/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@329528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328823 | kmoore | 2011-07-19 12:57:18 -0500 (Tue, 19 Jul 2011) | 11 lines
RTP bridge away with inband DTMF and feature detection
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
(closes 17237)
Review: https://reviewboard.asterisk.org/r/1302/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.10@328824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
Kevin P. Fleming
Richard Mudgett
Terry Wilson
Jonathan Rose
David Vossel
Walter Doekes
Kinsey Moore
Tzafrir Cohen
Matthew Nicholson
Tilghman Lesher
Russell Bryant
Gregory Nietsky