Currently, there are situations that can occur when using chan_pjsip
and certain dialplan applications (notably ChanSpy()) that can cause
the channel to get no audio with scrolling warnings about format
mismatches. This is caused by a failure to update translation paths on
a mid-call native format update since the raw formats have already
been updated by res_pjsip_sdp_rtp.c in set_caps(). Removing the
premature raw format updates allows the translation paths to be setup
correctly and the raw read and write formats with them.
AFS-63 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@415342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changed naming of included alias templates to avoid confusion between version names. For example, asterisk12 was for asterisk 1.2, so I changed it to asterisk_1dot2, so that later we can use asterisk_12 for Asterisk 12.
Added alias for "features reload" to the template for Asterisk 11 style syntax template, as features reload was removed in 12, but you can still do "module reload features"
Added alias for "pjsip reload" to the friendly template. It is shorter than "module reload res_pjsip.so" and if some are like me; I constantly forget that reloading chan_pjsip doesn't parse config. Remembering "pjsip reload" is just easier.
ASTERISK-23654 #close
ASTERISK-23654 #comment Fixed by adding two new aliases and enhancements for context names.
Review: https://reviewboard.asterisk.org/r/3572/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@415301 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The twisted logic determining if a config file should be reloaded was
mostly broken and disabled. The incorrect test that ASTERISK-23383 fixed
actually reenabled the broken logic. The incorrect test was causing the
timestamp to always be cleared which caused config files with includes to
always be reloaded.
* Made wildcard includes always cause a reload. Determining if a file was
deleted cannot be determined without restructuring the cache to determine
if any files are missing from the last files actually loaded. Also
without refactoring config_text_file_load(), the glob loop couldn't check
more than one file for changes anyway.
* Made remove the cache entry if the file no longer exists when trying to
get its timestamp or it is no longer a regular file. This fixes the
corner case where the file was loaded, then deleted, then the config
reloaded, then the file restored with the same timestamp, and then the
config reloaded again.
* Made remove the cache entry include list when actually loading the file.
This gets rid of any stale includes the file had from the last time the
file was loaded.
ASTERISK-23683 #close
Reported by: tootai
Review: https://reviewboard.asterisk.org/r/3575/
........
Merged revisions 415225 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@415230 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, users waiting to enter a ConfBridge were not considered
when muted via the CLI or via AMI. Instead, a confusing message would be
emitted stating that the channel did not exist.
This patch allows a user to be muted when waiting to enter a ConfBridge
conference. This is equivalent to start when muted, only toggled via the CLI
or AMI.
Review: https://reviewboard.asterisk.org/r/3582
#ASTERISK-23824 #close
patches:
rb3582.patch uploaded by tm1000 (License 6524)
........
Merged revisions 415206 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@415207 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleans up the safe_asterisk script and adds the ASTSAFE_FOREGROUND
option that allows the debian asterisk init script to capture the
right pid.
* Drop the vim #modeline which wasn't used. Use test consistently
without the odd configure xno syntax. Double quote all paths.
General cleanup.
* Don't output message()s to the console but only to TTY if set.
* Allow TTY to be "no" as well as empty (debian compatibility with
debian/patches/safe_asterisk-config).
* Add option to export ASTSAFE_FOREGROUND=1 from the init script
that calls this to disable backgrounding. Debian uses a similar
method in debian/patches/safe_asterisk-nobg).
ASTERISK-23492 #close
Review: https://reviewboard.asterisk.org/r/3574/
........
Merged revisions 415132 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415171 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@415172 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This small patch adds a debug level 3 statement indicating how a session
refresh is being sent - either as a re-INVITE or as an UPDATE - and where
the session refresh is going.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@415115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Conference names were not checked for maximum length, allowing unexpected
behaviour. This change adds checking to ensure the maximum length is not
exceeded. The maximum length is also changed from 32 to AST_MAX_EXTENSION.
ASTERISK-23035 #close
Reported by: Iñaki Cívico
Tested by: Iñaki Cívico
Patches:
confbridge-enforce_max-1.8.patch uploaded by coreyfarrell (license 5909)
confbridge-enforce_max-11up.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 415060 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415066 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@415078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change that removed the fixed size buffers in odbc-related code --
removing arbitrary column width limits -- was incomplete. This change
adds: no segfault on writesql without insertsql and return value checks
after strdup.
While I was in the vicinity I cleaned up the linefeeds in the odbc
function descriptions, moved some code for clarity, removed some blobs
and noted (but didn't fix) that the 'odbc write ... exec' CLI command
doesn't behave as the dialplan equivalent when insertsql= is used.
ASTERISK-23582 #close
~ASTERISK-23582 #comment test
-ASTERISK-23582 #comment test2
X-ASTERISK-23582 #comment test3
Review: https://reviewboard.asterisk.org/r/3579/
........
Merged revisions 414997 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414998 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge_native_rtp module currently uses the bridge result of the first
channel that joins a bridge as the ultimate result. This means that if the
first channel has direct media enabled but the second does not a direct
media bridge will still occur.
This change makes it so that both sides are taken into account. If either
side forbids the bridge or responds with a local bridge result then
either a generic or local bridge occurs.
ASTERISK-23541 #close
Reported by: Justin E
Review: https://reviewboard.asterisk.org/r/3577/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Blind transfers don't go too well with NULL channels which can occur if
the channel has already been transferred away.
(closes issue ASTERISK-23718)
Reported by: Jonathan Rose
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new channel function TALK_DETECT that, when set on a
channel, causes events indicating the start/stop of talking on a channel to be
emitted to both AMI and ARI clients.
The function allows setting both the silence threshold (the length of silence
after which we decide no one is talking) as well as the talking threshold (the
amount of energy that counts as talking). Parameters can be updated on a channel
after talk detection has been enabled, and talk detection can be removed at
any time.
The events raised by the function use a nomenclature similar to existing AMI/ARI
events.
For AMI: ChannelTalkingStart/ChannelTalkingStop
For ARI: ChannelTalkingStarted/ChannelTalkingFinished
Review: https://reviewboard.asterisk.org/r/3563/
ASTERISK-23786 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When invoking UpdateConfig AMI action with Action set to EmptyCat, Asterisk
will make all categories empty in the config but the one requested with a
Cat variable. This is due to a bug in ast_category_empty (main/config.c)
that makes an incorrect comparison for a category name.
This patch corrects the comparison such that only the requested category
is cleared.
Review: https://reviewboard.asterisk.org/r/3573/
#ASTERISK-23803 #close
Reported by: zvision
patches:
manager.c.diff uploaded by zvision (License 5755)
........
Merged revisions 414880 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414881 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414882 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the semantic versioning of ARI to 1.3.0 and AMI to 2.3.0 to account for
backwards compatible changes going from 12.2.0 to 12.3.0.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When generating SQL files via the repotools alembic_creator.py script, a
configuration object is used programatically with SQLAlechemy, as opposed to
a configuration file. This patch ignores failures to interpret a config file,
as ... there isn't one in this case.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414763 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply enabling PJSIP to negotiage a video codec (e.g., h264) would leak
video RTP ports if the codec were not negotiated by an incoming call.
* Made add_sdp_streams() associate the handler with the media stream if
the handler handled the media stream. Otherwise, when the
ast_sip_session_media object was destroyed it didn't know how to clean up
the RTP resources.
* Fixed sdp_requires_deferral() associating the handler with the media
stream when deciding if the SDP processing needs to be deferred for T.38.
Like the leaked video RTP ports, the T.38 handler needs to clean up
allocated resources from deciding if SDP processing needs to be deffered.
* Cleaned up some dead code in handle_incoming_sdp() and
sdp_requires_deferral().
ASTERISK-23721 #close
Reported by: cervajs
Review: https://reviewboard.asterisk.org/r/3571/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Improvements to the agent pool functionality.
* AgentRequest no longer hangs up the caller if the agent fails to connect
with the caller. It now continues in the dialplan.
* AgentRequest returns AGENT_STATUS set to NOT_CONNECTED if the agent
failed to connect with the call. Most likely because the agent did not
acknowledge the call in time or got disconnected.
* The agent alerting play file configured by the agent.conf custom_beep
option can now be disabled by setting the option to an empty string. The
agent is effectively alerted to a call presence when MOH stops.
* Fixed bridge reference leak when the agent connects with a caller.
ASTERISK-23499 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3551/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk started counting the session timer at INVITE while the other
end correctly started at 200. This meant that for short session-expiries
(90 seconds) combined with long ringing times (e.g. 30 seconds), asterisk
would wrongly assume that the timer was hit before the other end thought
it was time to send a session refresh. This resulted in prematurely
ended calls.
This changes the session timer to start counting first at 200 like RFC
says it should.
(Also removed a few excess NULL checks that would never hit, because if
they did, asterisk would have crashed already.)
ASTERISK-22551 #close
Reported by: i2045
Review: https://reviewboard.asterisk.org/r/3562/
........
Merged revisions 414620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414628 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ODBC realtime driver uses ^NN parameter encoding to cope with the
special meaning of the semi-colon. A semi-colon in a field is
interpreted as if the key was supplied twice, something which isn't
otherwise possible with fixed database columns. E.g. allow=alaw;ulaw
is parsed as allow=alaw and allow=ulaw. A literal semi-colon is
rewritten to ^3B when stored in the database.
The module uses a stringfield to efficiently store the encoded
parameters. However, this stringfield wasn't always freed in some
off-nominal cases.
Commit r413241 fixed initialization so the encoding for INSERT and
DELETE queries wouldn't crash. (Only SELECTs and UPDATEs worked
apparently.) But that commit forgot the frees. This change cleans
that up.
Review: https://reviewboard.asterisk.org/r/3555/
........
Merged revisions 414564 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414565 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel is destroyed (such as via ast_channel_release in off nominal
paths in core_unreal), it will attempt to free (via ast_free) the channel tech
pvt. This is problematic for a few reasons:
1. The channel tech pvt is an ao2 object in core_unreal. Free'ing the pvt
directly is no good.
2. The channel tech pvt's reference count is dropped just prior to calling
ast_channel_release, resulting in the pvt's destruction. Hence, the
channel destructor is free'ing an invalid pointer.
This patch keeps the dropping of the reference count, but sets the pvt to
NULL on the channel prior to releasing it. This models what would occur if the
channel was hung up directly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch instructs test_cel to skip any IE types it doesn't care about. The
addition of the raw and bitfield types caused the tests to fail.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
User events can now be generated from ARI. Events can be signalled with
arbitrary json variables, and include one or more of channel, bridge, or
endpoint snapshots. An application must be specified which will receive
the event message (other applications can subscribe to it). The message
will also be delivered via AMI provided a channel is attached. Dialplan
generated user event messages are still transmitted via the channel, and
will only be received by a stasis application they are attached to or if
the channel is subscribed to.
This change also introduces the multi object blob mechanism used to send
multiple snapshot types in a single message. The dialplan app UserEvent
was also changed to use multi object blob, and a new stasis message type
created to handle them.
ASTERISK-22697 #close
Review: https://reviewboard.asterisk.org/r/3494/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, when the last marked user leaves the conference, waitmarked
users don't get MOH if MOH is supposed to be played while a waitmarked
user is waiting for another marked user.
* Made not interrupt MOH when the user is a waitmarked user. The
waitmarked user doesn't need to hear any leave announcements from the
conference as the user would have already heard different leave
announcements if they were enabled. Apparently DAHDI occasionally sends
unending non-silent streams to these users or a normal user still in the
conference has continuous high background noise. These non-silent streams
cause MOH to be suspended while the never ending "announcement" is played.
Issue caused by ASTERISK-13680.
AST-1349 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3543/
........
Merged revisions 414401 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414402 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes res_corosync such that it works with Asterisk 12. This
restores the functionality that was present in previous versions of
Asterisk, and ensures compatibility with those versions by restoring the
binary message format needed to pass information from/to them.
The following changes were made in the core to support this:
* The event system has been partially restored. All event definition and
event types in this patch were pulled from Asterisk 11. Previously, we had
hoped that this information would live in res_corosync; however, the
approach in this patch seems to be better for a few reasons:
(1) Theoretically, ast_events can be used by any module as a binary
representation of a Stasis message. Given the structure of an ast_event
object, that information has to live in the core to be used universally.
For example, defining the payload of a device state ast_event in
res_corosync could result in an incompatible device state representation
in another module.
(2) Much of this representation already lived in the core, and was not
easily extensible.
(3) The code already existed. :-)
* Stasis message types now have a message formatter that converts their
payload to an ast_event object.
* Stasis message forwarders now handle forwarding to themselves. Previously
this would result in an infinite recursive call. Now, this simply creates a
new forwarding object with no forwards set up (as it is the thing it is
forwarding to). This is advantageous for res_corosync, as returning NULL
would also imply an unrecoverable error. Returning a subscription in this
case allows for easier handling of message types that are published directly
to an aggregate topic that has forwarders.
Review: https://reviewboard.asterisk.org/r/3486/
ASTERISK-22912 #close
ASTERISK-22372 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While load testing an ARI application, I noticed asterisk was returning HTTP 500
internal server errors on channels/:id/answer. After talking to #asterisk-dev,
the issue appeared to be a lack of media flowing after __ast_answer() was
called. So now, we call ast_raw_answer instead and no longer wait for media.
ASTERISK-23758 #close
Review: https://reviewboard.asterisk.org/r/3549/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes issues with direct media bridges that occur after a blind
transfer. These issues were caught by the (currently failing)
pjsip/transfers/blind_transfer/caller_direct_media test.
The test currently fails primarily for two reasons:
(1) When Bob and Charlie (the transfer target and the transfer destination)
enter a bridge together, the framehook remains on the transfer target
channel until both channels are in the bridge. As it consumes voice frames,
the initial bridge type is a simple bridge. The framehook is removed when
both channels are in the bridge; however, this does not currently cause the
bridging framework to re-evaluate the bridge. This patch adds a
AST_SOFTHANGUP_UNBRIDGE poke to the transfer target channel when a
framehook is removed so the bridge can re-evaluate itself.
(2) When a channel leaves a native RTP bridge, it may be leaving due to being
hung up. Sending a re-INVITE to a channel that is about to be hung up is
not nice - in fact, there's a good chance we'll send the BYE request before
the channel has had a chance to send back a 200 OK. To be somewhat nicer,
this patch adds a function to channel.h that allows the bridging framework
to query for exactly why a channel is leaving a bridge via the channel's
soft hangup flags. This allows it to only send the re-INVITE if there's a
chance the channel will survive the native bridging experience.
Review: https://reviewboard.asterisk.org/r/3535/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Populate the CALLERID(ani2) value (and the special CALLINGANI2 channel
variable) with the ANI2 value in addition to the PRI specific ANI2 channel
variable.
* Made complete snapshot staging with the channel lock held. All channel
snapshots need to be done while the channel lock is held.
........
Merged revisions 414050 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@414051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting a conference recording using the admin menu overwrites the DAHDI
conference data structure used to modify the admin user's conference mute
mode.
* Made no longer pass the user's DAHDI conference data structure into the
menu functions. The menu now uses its own DAHDI conference data
structure to start the recording channel.
* Moved the unlock conf->playlock to before playing the conf-full message.
No sense keeping the lock while that prompt is playing. The user is never
going to get into the conference at that point.
........
Merged revisions 413991 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413992 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
