The crash on the issues is a result of an invalid transport configuration
change when asterisk is restarted. The attempt to send the qualify
request fails and we cleaned up. However, the callback is also called
which results in a double unref of the objects involved.
* Put a wrapper around pjsip_endpt_send_request() to detect when the
passed in callback is called because of an error so callers can know to
not cleanup.
* Made send_request_cb() able to handle repeated challenges (Up to 10).
* Fix periodic endpoint qualify OPTIONS sched deletion race by avoiding
it. The sched entry will no longer self stop and must be externally
stopped.
* Added REF_DEBUG description tags to struct sched_data in
pjsip_options.c.
* Fix some off-nominal ref leaks in schedule_qualify(),
qualify_and_schedule().
* Reordered pjsip_options.c module start/stop code to cleanup better on
error.
ASTERISK-24295 #close
Reported by: Rogger Padilla
Review: https://reviewboard.asterisk.org/r/3954/
........
Merged revisions 423866 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When no transport is associated to an endpoint, the AMI output for
PJSIPShowEndpoint indicates an error instead of silently ignoring the
missing transport.
This patch causes the error to appear only if a transport was specified
on the endpoint and the transport doesn't exist. It also fixes an issue
with counting the objects that were actually found.
ASTERISK-24161 #close
ASTERISK-24331 #close
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3998/
........
Merged revisions 423282 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now when running PJSIPShowEndpoint, you will receive a
ContactStatusDetail for each bound contact that Asterisk
is qualifying. This information includes the URI of the
contact, current reachability, and roundtrip time.
AFS-91 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3797
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a problem where permanent contacts being qualified were not
being updated. This was caused by the permanent contacts getting a uuid and not a
known identifier, causing an inability to look them up when updating in the
qualify code. A bug also existed where the new configuration may not be available
immediately when updating qualifies.
(closes issue ASTERISK-23514)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/3448/
........
Merged revisions 412551 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed bad use of ao2_find() in on_endpoint().
* Replaced use of find_endpoints() with find_an_endpoint() since only the
first found endpoint is ever needed.
* Fixed qualify_contact_cb() to update the contact with the aor
authenticate_qualify setting. Otherwise, permanent contacts in the aor
type sections would have a config line order dependancy.
* Fixed off nominal path contact ref leak in qualify_contact(). The
comment saying the unref is not needed was wrong.
* Fixed off nominal path use of the endpoint parameter if it is NULL in
send_out_of_dialog_request().
* Added missing off nominal path unref of pjsip tdata in
send_out_of_dialog_request().
* Fixed off nominal path failing to call the callback in send_request_cb()
when the request is challenged for authentication.
* Eliminated silly RAII_VAR() use in qualify_contact_cb().
* Updated ast_sip_send_request() doxygen to better reflect reality.
(closes issue ASTERISK-23254)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/3381/
........
Merged revisions 411141 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds identify, transport, and registration support to the PJSIP CLI.
* Creates three additional callbacks, one for an iterator, one for a
comparator, and one for a container. This eliminates the link dependency
from higher level modules to lower level ones.
* Eliminates duplicate sorting in PJSIP CLI commands.
* Cleans up PJSIP CLI output formatting.
* Pushes CLI command registration down to the implementing source file.
* Adds several ast_sip_destroy_sorcery functions to complement existing
ast_sip_sorcery_initialize functions. The destroy functions unregister
PJSIP CLI commands and PJSIP CLI formatters.
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3104/
........
Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an endpoint had previously dynamically registered a contact and the contact
information was successfully stored in astdb then upon restart the qualify
notifications would not be sent out if the qualify_frequency was set. This was
due to the fact that only permanent contacts were being checked and scheduled
for qualifies on startup. Modified the code to check and schedule all
registered contacts at startup.
(closes issue ASTERISK-23062)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/3124/
........
Merged revisions 405748 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal
additions in res_pjsip_registrar.c to store the path and additions in
res_pjsip_outbound_registration.c to enable advertisement of path
support to registrars and intervening proxies.
Path information is stored on contacts and is enabled via Address of
Record (AoRs) and Registration configuration sections.
While adding path support, it became necessary to be able to add SIP
supplements that handled messages outside of sessions, so a framework
for handling these types of hooks was added in parallel to the
already-existing session supplements and several senders of
out-of-dialog requests were refactored as a result.
(closes issue ASTERISK-21084)
Review: https://reviewboard.asterisk.org/r/3050/
........
Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport type determination for security events has been simplified to use
the type present on the message itself instead of searching through configured
transports to find the transport used.
The actual WebSocket transport has also been simplified. It now leverages the
existing PJSIP transport manager for finding the active WebSocket transport
for outgoing messages. This removes the need for res_pjsip_transport_websocket
to store a mapping itself.
(closes issue ASTERISK-22897)
Reported by: Max E. Reyes Vera J.
Review: https://reviewboard.asterisk.org/r/3036/
........
Merged revisions 403256 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you run Asterisk in the background and then connect to
it through a separate console, the thread that runs CLI commands
is not registered with PJLIB. Thus PJLIB does not like it when
you attempt to send OPTIONS requests from that thread. So now
we push the task into the threadpool, which we know to be registered
with PJLIB.
Thanks to Antti Yrjola for reporting this.
........
Merged revisions 400680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are times when a configuration option should not have documentation.
1. Some options are registered with a particular object merely as a warning to
users. These options aren't even really 'deprecated' - which has its own
separate API call - they are actually provided by a different configuration
file. The options are merely registered so that the user gets a warning that
a different configuration file provides the item.
2. Some object types - most notably some used by modules that use sorcery - are
completely internal and should never be shown to the user.
3. Sorcery itself has several 'hidden' fields that should never be shown to a
user.
This patch updates the configuration framework and sorcery with additional API
calls that allow a module to register types as internal and options as not
requiring documentation. This bypasses the XML documentation checking.
This patch also re-enables the strict XML documentation checking in trunk, as
well as updates some documentation that was missing.
Review: https://reviewboard.asterisk.org/r/2785/
(closes issue ASTERISK-22359)
Reported by: Matt Jordan
(closes issue ASTERISK-22112)
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For chan_pjsip, this introduces CLI/AMI remote unregistration commands,
reworks CLI syntax for sending NOTIFYs, adds AMI qualification support,
and adds documentation for PJSIPNotify.
This also fixes two refcounting bugs in the outbound registration code.
Review: https://reviewboard.asterisk.org/r/2695/
(closes issue ASTERISK-21939)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
