(these memleaks stop development of gk codes, now i can continue)
Fix printHandler 'Unbalanced Structure' issues with locking printHandler
data for single thread.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@335064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- decrease for 1 second registration ttl for very low expirations (some
providers expire few earlier than TTL)
- delete rrq and registration expire timers on URQ received as we make
new registration.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix double alerting (it wasn't fixed here by issue #18542)
Add forced alerting before connect (if it wasn't before)
Try to send all packets from outgoing queue rather than one only
Call goes into clearing state when disconnect command is received
(closes issue #19361)
Reported by: vmikhelson
Patches:
issue19361-3.patch uploaded by may213 (license 454)
Tested by: vmikhelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@321528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code was not handling channel datastores safely. The channel
must be locked.
(closes issue #17964)
Reported by: wuwu
Patches:
issue17964_addon_1.6.2_svn.patch uploaded by seanbright (license 71)
Tested by: wuwu
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317837 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With large result sets we were blowing out the stack.
(closes issue #19090)
Reported by: mickecarlsson
Patches:
issue19090_trunk_svn.patch uploaded by seanbright (license 71)
Tested by: mickecarlsson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Send/RcvFax support
Introduce t.38 controls between asterisk core and channel/proto layers.
Not all parameters are transferred from proto layers but *Fax apps
tested and work ok.
(issue #18693)
Reported by: benngard2
Patches:
issue-18693.patch uploaded by may213 (license 454)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
small fixes.
Interpret remote side H.225 version.
Corrections for H.323v2 endpoints:
don't start TCS and MSD before connect,
don't start TCS and MSD by accepting H.245 connection,
start TCS and MSD by StartH245 facility message.
Other fixes:
fix non zeroended remoteDisplayName issue, small fixes in call clearing
by closing H.245 connection, tcp keepalive introduced on TCP
connections (now is hardcoded, will be configurable in the future),
don't force H.245tunneling if FastStart is active, don't send Alerting
singal more than once per call.
(issue 0018542)
Reported by: vmikhelson
Patches:
issue18542-final-3.patch uploaded by may213 (license 454)
Tested by: vmikhelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@307509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Change order of sending Terminal Capability Set and MasterSlave
Determination packets, MSD send when TCS exchange procedure is done
(we send tcs ack to remote and we have remote tcs ack already
or we receive tcs ack from remote and we have send our tcs ack to
remote already). Some endpoints can work in this sequence only,
i suggest they can't work with both (tcs and msd) exchange procedures
simultaneously.
Also changed StartH245 facility message sending. It send on
incoming calls only due to some endpoints can't proccess properly
this facility messages on their incoming calls.
(issue #18433)
Reported by: MrHanMan
Patches:
tcs-msd-h245-3.patch uploaded by may213 (license 454)
Tested by: MrHanMan, may213
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@299711 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't use GK ID if it's not presented in GK replies
Extract GK ID not only in GK confirm but in GK register confirm also
(issue #18401)
Reported by: MrHanMan
Patches:
no-gkid-2.patch uploaded by may213 (license 454)
Tested by: may213, MrHanMan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@298099 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added options for faststart/h.245 tunneling per user/peer, properly
handle these and global options, correction of handling fs/tunneling
fields in signalling responses
(issue #17972)
Reported by: salecha
Patches:
fs-tunnel-per-point-3.patch uploaded by may213 (license 454)
Tested by: may213, salecha
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@291005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
