https://origsvn.digium.com/svn/asterisk/trunk
(closes issue #16470)
Reported by: kjotte
........
r228798 | tilghman | 2009-11-09 01:37:52 -0600 (Mon, 09 Nov 2009) | 14 lines
Fix various problems detected with Valgrind.
* chan_console accessed pvts after deallocation.
* The module loader did not check usecount on shutdown, which led to chan_iax2
reading a timer that was already unloaded.
(closes issue #16062)
Reported by: alexanderheinz
Patches:
20091109__issue16062.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@248009 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r202410 | dvossel | 2009-06-22 10:33:35 -0500 (Mon, 22 Jun 2009) | 5 lines
attempting to load running modules
Modules placed in the priority heap for loading were not properly removed from the linked list. This resulted in some modules attempting to load twice.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@202412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r199743 | dvossel | 2009-06-09 11:22:04 -0500 (Tue, 09 Jun 2009) | 11 lines
module load priority
This patch adds the option to give a module a load priority. The value represents the order in which a module's load() function is initialized. The lower the value, the higher the priority. The value is only checked if the AST_MODFLAG_LOAD_ORDER flag is set. If the AST_MODFLAG_LOAD_ORDER flag is not set, the value will never be read and the module will be given the lowest possible priority
on load. Since some modules are reliant on a timing interface, the timing modules have been given a high load priorty.
(closes issue #15191)
Reported by: alecdavis
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/262/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@199745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r199051 | seanbright | 2009-06-04 10:31:24 -0400 (Thu, 04 Jun 2009) | 47 lines
Merged revisions 199022 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199022 | seanbright | 2009-06-04 10:14:57 -0400 (Thu, 04 Jun 2009) | 40 lines
Safely handle AMI connections/reload requests that occur during startup.
During asterisk startup, a lock on the list of modules is obtained by the
primary thread while each module is initialized. Issue 13778 pointed out a
problem with this approach, however. Because the AMI is loaded before other
modules, it is possible for a module reload to be issued by a connected client
(via Action: Command), causing a deadlock.
The resolution for 13778 was to move initialization of the manager to happen
after the other modules had already been lodaded. While this fixed this
particular issue, it caused a problem for users (like FreePBX) who call AMI
scripts via an #exec in a configuration file (See issue 15189).
The solution I have come up with is to defer any reload requests that come in
until after the server is fully booted. When a call comes in to
ast_module_reload (from wherever) before we are fully booted, the request is
added to a queue of pending requests. Once we are done booting up, we then
execute these deferred requests in turn.
Note that I have tried to make this a bit more intelligent in that it will not
queue up more than 1 request for the same module to be reloaded, and if a
general reload request comes in ('module reload') the queue is flushed and we
only issue a single deferred reload for the entire system.
As for how this will impact existing installations - Before 13778, a reload
issued before module initialization was completed would result in a deadlock.
After 13778, you simply couldn't connect to the manager during startup (which
causes problems with #exec-that-calls-AMI configuration files). I believe this
is a good general purpose solution that won't negatively impact existing
installations.
(closes issue #15189)
(closes issue #13778)
Reported by: p_lindheimer
Patches:
06032009_15189_deferred_reloads.diff uploaded by seanbright (license 71)
Tested by: p_lindheimer, seanbright
Review: https://reviewboard.asterisk.org/r/272/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@199053 65c4cc65-6c06-0410-ace0-fbb531ad65f3
has been loaded, fix a return value in the loader, and ensure that the help
workhorse header does not print on load.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103728 | russell | 2008-02-15 13:50:11 -0600 (Fri, 15 Feb 2008) | 4 lines
In the case that you try to directly reload a module has returned
AST_MODULE_LOAD_DECLINE, log a message indicating that the module is not fully
initialized and must be initialized using "module load".
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103726 | russell | 2008-02-15 12:33:29 -0600 (Fri, 15 Feb 2008) | 6 lines
Don't attempt to execute the reload callback for a module that returned
AST_MODULE_LOAD_DECLINE. This fixes a crash that was reported against
chan_console in trunk.
(closes issue #11953, reported by junky, fixed by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
gdb dying while debugging asterisk. The problem seems to be related
with a race in the handling of module_list, which in turn is triggeded
by calling dlopen() on a system which uses initializers to create
locks.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is only to complete the build, clearly the linker
behaviour will be completely different and likely to
cause trouble in those cases.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89325 | kpfleming | 2007-11-16 10:47:46 -0600 (Fri, 16 Nov 2007) | 4 lines
To help combat problems where people build external modules (asterisk-addons or others) and then change the build options of the Asterisk build in a way that makes the incompatible without warning, this commit introduces an MD5 signature of the important build-time options and includes that signature into modules when they are built. When the loader loads one of these modules and notices the problem, it will emit a warning to console and refuse to initialize the module, as doing so could cause the system to be unstable or even crash.
If you upgrade to this version of Asterisk, you must rebuild *all* of your modules that came from other sources before trying to run this version. If you are using Digium's G.729 binary codec module, you will need v33 or newer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the constructor for the list of modules was run
after the constructors for the embedded modules
(which appended entries to the list).
As a result, the list appeared empty when it was
time to use it.
On linux the order of execution of constructor
was evidently different (it may depend on the
ordering of modules in the ELF file).
This is only a workaround - there may be other
situations where the execution of constructors
causes problems, so if we manage to find a more
general solution this workaround can go away.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89031 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r67308 | russell | 2007-06-05 10:51:53 -0500 (Tue, 05 Jun 2007) | 5 lines
When shutting down "gracefully", go through and run the unload() callbacks for
all of the modules. "stop now" is considered a non-graceful shutdown and will
not go through this process.
(issue #9804, reported by chrisost, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r62986 | kpfleming | 2007-05-03 11:38:56 -0500 (Thu, 03 May 2007) | 2 lines
improve loader a bit, by avoiding trying to initialize embedded modules twice and avoiding trying to load modules from disk when they have been loaded already during the 'preload' pass (reported by blitzrage on IRC, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@62988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
