https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r312210 | alecdavis | 2011-04-01 21:47:29 +1300 (Fri, 01 Apr 2011) | 29 lines
Merged revisions 312174 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r312174 | alecdavis | 2011-04-01 21:29:49 +1300 (Fri, 01 Apr 2011) | 23 lines
voicemail: get real last_message_index and count_messages, ODBC resequence
change last_message_index to read the max msgnum stored in the database
change count_messages to actually count the number of messages.
last_message_index change:
This fixed overwriting of the last message if msgnum=0 was missing.
Previously every incoming message would overwrite msgnum=1.
count_messages change:
allows us to detect when requencing is required in opneA_mailbox.
resequence enabled for ODBC storage:
Assists with fixing up corrupt databases with gaps, but only when
a user actively opens there mailboxes.
(closes issue #18692,#18582,#19032)
Reported by: elguero
Patches:
based on odbc_resequence_mailbox2.1.diff uploaded by elguero (license 37)
Tested by: elguero, nivek, alecdavis
Review: https://reviewboard.asterisk.org/r/1153/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@312211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r312103 | alecdavis | 2011-04-01 20:25:54 +1300 (Fri, 01 Apr 2011) | 22 lines
Merged revisions 312070 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r312070 | alecdavis | 2011-04-01 19:46:56 +1300 (Fri, 01 Apr 2011) | 16 lines
app_voicemail: close_mailbox needs to respect additional messages while mailbox is open.
close_mailbox leave gaps in message sequence if messages are deleted and new messages
arrive during this time, this is because the shuffle down to slot 0, only shuffles
the number of pre-existing messages when mailbox is opened, ignoring new arrivals.
Fix: in close_mailbox re-evaluate number of messages before the shuffle, this then includes new arrivals.
Happens on filebased or ODBC storage.
(issues #19032,#18582,#18692,#18998)
Reported by: alecdavis,tootai,afosorio
Review: https://reviewboard.asterisk.org/r/1153/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@312117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The segfault happens because jb->mutexjb is uninitialized from the
ast_malloc(). The internals of ast_mutex_init() were assuming a nonzero
value meant mutex tracking initialization had already happened. Recent
changes to mutex tracking code to reduce excessive memory consumption
exposed this uninitialized value.
Converted misdn_jb_init() to use ast_calloc() instead of ast_malloc().
Also eliminated redundant zero initialization code in the routine.
(closes issue #18975)
Reported by: irroot
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@312022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This function isn't used anywhere yet, but we definitely don't want
to keep the same value for buf between calls to the function.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@311558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is supposed to improve Solaris compatibility since Solaris goes berserk when trying to output NULL strings.
(closes issue #18759)
Reported by: bklang
Patches:
null-strings.patch uploaded by bklang (license 919)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@311352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The queued AST_CONTROL_BUSY could sometimes be processed before the
call_forward dial string is recognized.
* Moved setting the call_forwarding dial string after sending a response
to the initiator and just queue an empty frame to wake up the media thread
instead of an AST_CONTROL_BUSY.
* Added check for empty rerouting/deflection number and respond with an
error.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@311297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r310986 | rmudgett | 2011-03-16 13:56:28 -0500 (Wed, 16 Mar 2011) | 28 lines
Dial() o option broke when connected line feature added.
The patch restores the o option behavior and adds the ability to specify
the CallerID. The Dial o and f options are complementary to each other.
The o option stores the CallerID on the outgoing channel as the channel's
CallerID. The f option forces the CallerID sent by the outgoing channel.
o(x) - The argument 'x' is optional. If not present, then specify that
the CallerID that was present on the *calling* channel be stored as the
CallerID on the *called* channel. This was the behavior of Asterisk 1.0
and earlier. If present, then specify the CallerID stored on the *called*
channel. Note that o(${CALLERID(all)}) is similar to option o without
parameters.
f(x) - The argument 'x' is optional and its presence changes the behavior
of this option. If not present, then force the outgoing CallerID on a
call-forward or deflection to the dialplan extension for this Dial() using
a dialplan 'hint'. For example, some PSTNs do not allow CallerID to be
set to anything other than the numbers assigned to you. If present, then
force the outgoing CallerID to 'x'.
Patches:
jira_abe_2752_dial_fo_options.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
JIRA ABE-2752
JIRA SWP-3096
..........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@311295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310889 | twilson | 2011-03-16 12:03:27 -0500 (Wed, 16 Mar 2011) | 36 lines
Merged revisions 310888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310888 | twilson | 2011-03-16 11:58:42 -0500 (Wed, 16 Mar 2011) | 29 lines
Don't delay DTMF in core bridge while listening for DTMF features
This patch is mostly the work of Olle Johansson. I did some cleanup and
added the silence generating code if transmit_silence is set.
When a channel listens for DTMF in the core bridge, the outbound DTMF is not
sent until we have received DTMF_END. For a long DTMF, this is a disaster. We
send 4 seconds of DTMF to Asterisk, which sends no audio for those 4 seconds.
Some products see this delay and the time skew on RTP packets that results and
start ignoring the audio that is sent afterward.
With this change, the DTMF_BEGIN frame is inspected and checked. If it matches
a feature code, we wait for DTMF_END and activate the feature as before. If
transmit_silence=yes in asterisk.conf, silence is sent if we paritally match a
multi-digit feature. If it doesn't match a feature, the frame is forwarded
along with the DTMF_END without delay. By doing it this way, DTMF is not delayed.
(closes issue #15642)
Reported by: jasonshugart
Patches:
issue_15652_dtmf_ast-1.4.patch.txt uploaded by twilson (license 396)
Tested by: globalnetinc, jde
(closes issue #16625)
Reported by: sharvanek
Review: https://reviewboard.asterisk.org/r/1092/
Review: https://reviewboard.asterisk.org/r/1125/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310902 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Send/RcvFax support
Introduce t.38 controls between asterisk core and channel/proto layers.
Not all parameters are transferred from proto layers but *Fax apps
tested and work ok.
(issue #18693)
Reported by: benngard2
Patches:
issue-18693.patch uploaded by may213 (license 454)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves the data store destruction and app signaling events for a call to ast_hangup so that threads which wait for data store destruction
don't become stuck forever when attached to an application/function/etc that keeps the channel open.
(closes issue #18742)
Reported by: jkister
Patches:
patch.diff uploaded by jrose (license 1225)
Tested by: jkister, jcovert, jrose
Review: https://reviewboard.asterisk.org/r/1136/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310635 | rmudgett | 2011-03-14 11:47:54 -0500 (Mon, 14 Mar 2011) | 32 lines
Merged revisions 310633 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310633 | rmudgett | 2011-03-14 11:38:24 -0500 (Mon, 14 Mar 2011) | 25 lines
"Caller*ID failed checksum" on Wildcard TDM2400P and TDM410
The last character in the caller id message is getting a framing error.
The checksum is the last character in the message. A framing error in the
checksum could be because:
1) The sender did not send a full stop bit.
2) The sender cut off the FSK carrier too soon.
3) The sender opted to send zero of the specified zero to 10 trailing mark
bits and round-off errors in the code resulted in the code not being where
it thought it was in the demodulated bit stream.
Bit 8 of 'b' is set when parity error.
Bit 9 of 'b' is set when framing error.
Made ignore the framing and parity error bits if the errored character is
the checksum. We can tolerate a framing/parity error there. The checksum
character validates the message.
(closes issue #18474)
Reported by: nivek
Patches:
callerid.c.1.patch uploaded by nivek (license 636) (with modifications)
Tested by: nivek
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310448 | tilghman | 2011-03-12 14:24:54 -0600 (Sat, 12 Mar 2011) | 38 lines
Recorded merge of revisions 310435 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310435 | tilghman | 2011-03-12 14:22:07 -0600 (Sat, 12 Mar 2011) | 31 lines
Add AELSub, which provides a stable entry point into AEL subroutines.
This commit needs some explanation, given that we're adding a new application
into an existing release branch. This is generally a violation of our release
policy, except in very limited circumstances, and I believe this is one of
those circumstances.
The problem that this solves is one of the sanity of using multiple dialplan
languages to define a dialplan. In the case of the reporter, he or she is
using AEL is define subroutines, while using Realtime extensions to invoke
those subroutines. While you can do this, it's based upon the reality of AEL
using actual dialplan extensions; however, there is no guarantee that the
details of _how_ AEL is compiled into extensions will remain stable. In fact,
at the time of this commit, it has already changed twice, once in a
fundamental way.
Now normally, a new application would only be added to trunk. However, this
application is explicitly to create a stable user-level API between versions,
and adding it to trunk only will not solve the user's problem of switching
between 1.6.2 and 1.8, nor will it help anybody switching from 1.8 to 1.10.
Therefore, it needs to go into existing release branches. For the sake of
consistency, and also because one of the changes was between 1.4 and 1.6.x,
I am also electing to commit this to 1.4.
(closes issue #18910)
Reported by: alexandrekeller
Patches:
20110304__issue18919__1.6.2.diff.txt uploaded by tilghman (license 14)
20110304__issue18919__1.4.diff.txt uploaded by tilghman (license 14)
Tested by: alexandrekeller
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the channel condition is one of the following after breaking out of the loop, don't try to update_peer
(where x = 0/1)
1). ZOMBIE
2). cx->tech_pvt != pvtx
3). gluex != ast_rtp_instance_get_glue(cx->tech->type))
(closes issue #18781)
Reported by: alecdavis
Patches:
bug18781.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, ZX81
Review: https://reviewboard.asterisk.org/r/1128/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r309204 changed the behavior of ast_http_send. It now requires headers
to be passed with trailing \r\n. This change updates the remaining
instances in the code that did not pass the \r\n.
(closes issue #18186)
Reported by: nivaldomjunior
Patches:
res_phoneprov.c.diff uploaded by lathama (license 1028)
manager.diff.txt uploaded by twilson (license 396)
Tested by: lathama
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@310240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309541 | mnicholson | 2011-03-04 12:59:20 -0600 (Fri, 04 Mar 2011) | 4 lines
Check for errors from fseek() when loading config file, properly abort on errors from fread(), and supply a traceback for errors generated when loading the config file.
Also, prepend a newline to traceback output so that the main error message is on it's own line.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting with Asterisk v1.8, the DAHDI channel name format was changed for
ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
There were several reasons that the channel name had to change.
1) Call completion requires a device state for ISDN phones. The generic
device state uses the channel name.
2) Calls do not necessarily have B channels. Calls placed on hold by an
ISDN phone do not have B channels.
3) The B channel a call initially requests may not be the B channel the
call ultimately uses. Changes to the internal implementation of the
Asterisk master channel list caused deadlock problems for chan_dahdi if it
needed to change the channel name. Chan_dahdi no longer changes the
channel name.
4) DTMF attended transfers now work with ISDN phones because the channel
name is "dialable" like the chan_sip channel names.
For various reasons, some people need to know which B channel a DAHDI call
is using.
* Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and
CHANNEL(dahdi_type) so the dialplan can determine the B channel currently
in use by the channel. Use CHANNEL(no_media_path) to determine if the
channel even has a B channel.
* Added AMI event DAHDIChannel to associate a DAHDI channel with an
Asterisk channel so AMI applications can passively determine the B channel
currently in use. Calls with "no-media" as the DAHDIChannel do not have
an associated B channel. No-media calls are either on hold or
call-waiting.
(closes issue #17683)
Reported by: mrwho
Tested by: rmudgett
(closes issue #18603)
Reported by: arjankroon
Patches:
issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: stever28, rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
