https://origsvn.digium.com/svn/asterisk/trunk
........
r199818 | dvossel | 2009-06-09 15:47:57 -0500 (Tue, 09 Jun 2009) | 11 lines
CLI NOTIFY sending wrong transport type.
SIP's cli NOTIFY command only used UDP rather than copying the transport type from the peer.
(closes issue #15283)
Reported by: jthurman
Patches:
sip-notify-tcp-svn199728.patch uploaded by jthurman (license 614)
Tested by: jthurman, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@199821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r199227 | mmichelson | 2009-06-05 08:51:08 -0500 (Fri, 05 Jun 2009) | 14 lines
Correct "dahdi show channels" output when specifying a group.
Since a DAHDI channel may belong to multiple groups, we need to use
a bitwise and instead of equivalence to determine whether to display
the channel information.
(closes issue #15248)
Reported by: gentian
Patches:
15248.patch uploaded by mmichelson (license 60)
Tested by: gentian
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@199228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r198824 | dvossel | 2009-06-02 12:55:35 -0500 (Tue, 02 Jun 2009) | 8 lines
fixes issue with channels not going down after transfer
Iax2 currently does not support native bridging if the timeoutms value is set. We check for that in iax2_bridge, but then set timeoutms to 0 by default. If the timeoutms is not provided it is set to -1. By setting timeoutms to 0 it is processed causing a bridging retry loop.
(closes issue #15216)
Reported by: oxymoron
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@198825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197621 | eliel | 2009-05-28 12:01:48 -0400 (Thu, 28 May 2009) | 19 lines
Merged revisions 197562 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197562 | eliel | 2009-05-28 11:21:32 -0400 (Thu, 28 May 2009) | 13 lines
Use the address we already know when reloading a peer with nat=yes.
If we already have an address for a peer, and we are reloading the sip
configuration, try to use that address to contact the peer, instead of
getting it from the Contact.
(closes issue #15194)
Reported by: ibc
Patches:
sip.patch uploaded by eliel (license 64)
Tested by: manwe
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197606 | mmichelson | 2009-05-28 10:32:19 -0500 (Thu, 28 May 2009) | 22 lines
Recorded merge of revisions 197588 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197588 | mmichelson | 2009-05-28 10:27:49 -0500 (Thu, 28 May 2009) | 16 lines
Allow for media to arrive from an alternate source when responding to a reinvite with 491.
When we receive a SIP reinvite, it is possible that we may not be able to process the
reinvite immediately since we have also sent a reinvite out ourselves. The problem is
that whoever sent us the reinvite may have also sent a reinvite out to another party,
and that reinvite may have succeeded.
As a result, even though we are not going to accept the reinvite we just received, it
is important for us to not have problems if we suddenly start receiving RTP from a new
source. The fix for this is to grab the media source information from the SDP of the
reinvite that we receive. This information is passed to the RTP layer so that it will
know about the alternate source for media.
Review: https://reviewboard.asterisk.org/r/252
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197467 | file | 2009-05-28 10:47:45 -0300 (Thu, 28 May 2009) | 15 lines
Merged revisions 197466 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197466 | file | 2009-05-28 10:44:58 -0300 (Thu, 28 May 2009) | 8 lines
Fix a bug where the flag indicating the presence of rport would get overwritten by the nat setting.
The presence of rport is now stored as a separate flag. Once the dialog is setup and authenticated
(or it passes through unauthenticated) the proper nat flag is set.
(closes issue #13823)
Reported by: dimas
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r196988 | seanbright | 2009-05-27 09:02:54 -0400 (Wed, 27 May 2009) | 9 lines
Display an error message when chan_alsa fails to load due to a missing
or inaccessible configuration file.
Before this change, when chan_alsa failed to load due to a missing or
inaccessible configuration file, no message would be displayed. With this
change, when chan_alsa fails to load due to a missing or inaccessible
configuration file, a message will be displayed.
(closes issue #14760)
Reported by: Nick_Lewis
Patches:
chan_alsa.c-confload.patch uploaded by Nick (license 657)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@196989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r196416 | dvossel | 2009-05-22 16:09:45 -0500 (Fri, 22 May 2009) | 19 lines
SIP set outbound transport type from Registration
In sip.conf the transport option allows for the configuration of what transport types (udp, tcp, and tls) a peer will accept, but only the first type listed was used for outbound connections. This patch changes this. Now the default transport type is only used until the peer registers. When registration takes place the transport type is parsed out of the Contact header. If the Contact header's transport type is equal to one that the peer supports, the peer's default transport type for outbound connections is set to match the Contact header's type. If the Contact header's transport type is not present, then the peer's default transport type is set to match the one the peer registered with. When a peer unregisters or the registration expires, the default transport type for that peer is reset.
(closes issue #12282)
Reported by: rjain
Patches:
reg_patch_1.diff uploaded by dvossel (license 671)
Tested by: dvossel
(closes issue #14727)
Reported by: pj
Patches:
reg_patch_3.diff uploaded by dvossel (license 671)
Tested by: pj, dvossel
Review: https://reviewboard.asterisk.org/r/249/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@196454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r195995 | dvossel | 2009-05-21 14:11:49 -0500 (Thu, 21 May 2009) | 20 lines
Merged revisions 195991 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r195991 | dvossel | 2009-05-21 14:04:56 -0500 (Thu, 21 May 2009) | 14 lines
Sign problem calculating timestamp for iax frame leads to no audio on the receiving peer.
There are rare cases in which a frame's delivery timestamp is slightly less than the iax2_pvt's offset. This causes the pvt's timestamp to be a small negative number, but since the timestamp value is unsigned it looks like a huge positive number. This patch checks for this negative case and sets the ms to zero. A similar check is already done right below this one in the 'else' statement.
(closes issue #15032)
Reported by: guillecabeza
Patches:
chan_iax2.c.patch_timestamp uploaded by guillecabeza (license 380)
Tested by: guillecabeza
(closes issue #14216)
Reported by: Andrey Sofronov
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@195997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r194833 | dvossel | 2009-05-15 15:52:12 -0500 (Fri, 15 May 2009) | 24 lines
Merged revisions 194557,194685 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194557 | dvossel | 2009-05-14 17:59:43 -0500 (Thu, 14 May 2009) | 10 lines
IAX2 "Ghost" Channels
There is a bug tracker issue where people are reporting "Ghost" channels in their 'iax2 show channels' output. The confusion is caused by channels being listed as "(NONE)" with format "unknown". These are not channels of coarse. They are usually just pending registration or poke requests, but it is confusing output. To help make sense of this I have added two columns to 'iax2 show channels'. One shows the first message which started the transaction, and the second shows the last message sent by either side of the call. This helps diagnose why the entry exists and why it may not go away.
(closes issue #14207)
Reported by: clive18
Review: https://reviewboard.asterisk.org/r/246/
........
r194685 | dvossel | 2009-05-15 10:40:37 -0500 (Fri, 15 May 2009) | 6 lines
Update to previous IAX2 "Ghost" Channels patch.
Fixed some comments made on reviewboard for the previous patch.
(issue #14207)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@194834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r194496 | mmichelson | 2009-05-14 17:20:51 -0500 (Thu, 14 May 2009) | 30 lines
Merged revisions 194484 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194484 | mmichelson | 2009-05-14 17:17:55 -0500 (Thu, 14 May 2009) | 24 lines
Fix a race condition where a reinvite could trigger a 482 response.
The loop detection/spiral detection code in chan_sip used the owner
channel's state as a criterion for determining if the incoming INVITE
is a looped request. The problem with this is that the INVITE-handling
code happens in a different thread than the thread that marks the owner
channel as being up. As a result, if a reinvite were to come in very quickly,
say from another Asterisk on the same LAN, it was possible for the reinvite
to arrive before the owner channel had been set to the up state.
This patch corrects the problem by using the invitestate of the sip_pvt
instead, since that can be guaranteed to be set correctly by the time
the reinvite arrives. Since there is a switch statement further in the
INVITE-handling code, the AST_STATE_RINGING state also checks the invitestate
of the sip_pvt in case we should actually be treating the channel as if it were
up already.
(closes issue #12215)
Reported by: jpyle
Patches:
12215_confirmed.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@194504 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r193954 | mmichelson | 2009-05-12 15:28:13 -0500 (Tue, 12 May 2009) | 18 lines
Update spiral support in trunk and 1.6.X to match what is in 1.4.
In 1.4, a SIP spiral is treated the same way as a call forward. This
works much better than what is currently in trunk and 1.6.X. The code
in trunk and 1.6.X did not create a new call to the recipient of the spiral,
instead trying to continue the same call. In addition to just being plain
wrong, this also had the side effect of only being able to spiral calls
to other SIP channels.
With this in place, as long as call forwards are honored, SIP spirals
will work properly. This means that it will work for outbound calls
made by the Queue, Dial, and Page applications. For originated calls and
spool calls, however, the spiral will not work properly until a generic
call forward mechanism is introduced into Asterisk.
(relates to issue #13630)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r193614 | rmudgett | 2009-05-11 14:11:29 -0500 (Mon, 11 May 2009) | 19 lines
Merged revisions 193613 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193613 | rmudgett | 2009-05-11 14:09:00 -0500 (Mon, 11 May 2009) | 12 lines
Sent wrong message to clear a call we started if the other end has not responed yet.
In the state MISDN_CALLING (i.e. SETUP was sent but no answer has arrived yet),
it is not allowed to clear the call with RELEASE_COMPLETE. It must be
cleared with DISCONNECT. A RELEASE_COMPLETE is only allowed as an answer
to a SETUP. (See Q.931 ch. 5.3.2, 5.3.2.a, 5.3.2.b)
Patches:
chan-misdn-ccstate7.patch uploaded by customer.
JIRA ABE-1862
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r193387 | dvossel | 2009-05-08 15:32:51 -0500 (Fri, 08 May 2009) | 7 lines
TCP not matching valid peer.
find_peer() does not find a valid peer when using pvt->recv as the sockaddr_in argument. Because of the way TCP works, the port number in pvt->recv is not what we're looking for at all. There is currently only one place that find_peer searches for a peer using the sockaddr_in argument. If the peer is not found after using pvt->recv (works for UDP since the port number will be correct), a temp sockaddr_in struct is made using the Contact header in the sip_request. This has the correct port number in it.
Review: http://reviewboard.digium.com/r/236/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r193077 | rmudgett | 2009-05-07 17:24:04 -0500 (Thu, 07 May 2009) | 12 lines
Merged revisions 193050 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193050 | rmudgett | 2009-05-07 17:17:06 -0500 (Thu, 07 May 2009) | 5 lines
Give a more helpful message when an incoming call's dialed extension does not match.
Added the dialed extension and context to the chan_misdn messages warning
that the dialed number cannot be matched in the dialplan.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@193078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r192933 | tilghman | 2009-05-07 11:43:56 -0500 (Thu, 07 May 2009) | 17 lines
Merged revisions 192932 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r192932 | tilghman | 2009-05-07 11:29:08 -0500 (Thu, 07 May 2009) | 10 lines
Eliminate repetition of fullcontact during reconstruction.
If the fullcontact field appears in both the sippeers and the
sipregs table, then during reconstruction of the field, it will
otherwise be doubled.
(closes issue #14754)
Reported by: Alexei Gradinari
Patches:
20090506__bug14754.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@192934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r192387 | file | 2009-05-05 11:22:47 -0300 (Tue, 05 May 2009) | 10 lines
Fix a bug with setting t38pt_udptl at the user or peer level.
If an incoming call authenticated as a user or peer and t38pt_udptl was
not set to yes in general then no UDPTL session would be present and any
T38 related things would fail. This commit changes it so that if after
authenticating T38 is enabled but no UDPTL session is present one will be
created.
(issue AST-215)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@192397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r190287 | file | 2009-04-23 16:15:30 -0300 (Thu, 23 Apr 2009) | 13 lines
Merged revisions 190286 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r190286 | file | 2009-04-23 16:13:18 -0300 (Thu, 23 Apr 2009) | 6 lines
Fix a bug in chan_local glare hangup detection.
If both sides of a Local channel were hung up at around the same time it was
possible for one thread to destroy the local private structure and have the other thread
immediately try to remove the already freed structure from the local channel list.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@190288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189993 | jpeeler | 2009-04-22 14:23:49 -0500 (Wed, 22 Apr 2009) | 18 lines
Make chan_h323 respect packetization settings
Previously, packetization settings were ignored and now they are not. A new
config option 'autoframing' has been added to mirror the way chan_sip handles
it. Turning on the autoframing option (available both as a global option or per
peer) overrides the local settings with the remote packetization settings.
Testing was performed with varying packetization levels with the following
codecs: ulaw, alaw, gsm, and g729.
(closes issue #12415)
Reported by: pj
Patches:
2009012200_h323packetization.diff.txt uploaded by mvanbaak (license 7),
modified by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189911 | tilghman | 2009-04-22 11:01:30 -0500 (Wed, 22 Apr 2009) | 7 lines
Do not continue to receive DTMF, when the channel is hungup and about to be destroyed.
(closes issue #14858)
Reported by: barryf
Patches:
20090421__bug14858.diff.txt uploaded by tilghman (license 14)
Tested by: barryf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189771 | dvossel | 2009-04-21 15:28:37 -0500 (Tue, 21 Apr 2009) | 11 lines
Fixes segfault when switching UDP to TCP in sip.conf after reload.
If transport in sip.conf is switched from UDP to TCP, Asterisk segfaults right after issuing a sip reload. The problem is the socket type is changed to TCP but the fd may still be present for UDP. Later, when the TCP session should be created or set using an existing one, it isn't because the old file descriptor is still present. Now every time transport is changed during a sip.conf reload, the file descriptor is set to -1, signifying it must be created or found.
(closes issue #14727)
Reported by: pj
Tested by: dvossel
Review: http://reviewboard.digium.com/r/229/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r189419 | dbailey | 2009-04-20 14:28:16 -0500 (Mon, 20 Apr 2009) | 11 lines
Merged revisions 189391 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189391 | dbailey | 2009-04-20 14:10:56 -0500 (Mon, 20 Apr 2009) | 4 lines
Clean up problem with manager implementation of mmap where it was not testing against MAP_FAILED response.
Got rid of shadowed variable used in processign the mmap results.
Change test of mmap results to compare against MAP_FAILED
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189421 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r189204 | dvossel | 2009-04-17 20:28:45 -0500 (Fri, 17 Apr 2009) | 18 lines
Merged revisions 189203 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189203 | dvossel | 2009-04-17 20:27:19 -0500 (Fri, 17 Apr 2009) | 12 lines
Fixed autologoff in agents.conf not working when agent logs in via AgentLogin app
An agent logs in by calling an extension that calls the AgentLogin app. In agents.conf ackcall=always is set, so when they get a call they have the choice to either acknowledge it or ignore it. autologoff=10 is set as well, so if the agent ignores the call over 10sec one may assume that the agent should be logged out (and in this case hungup on as well), but this was not happening.
(closes issue #14091)
Reported by: evandro
Patches:
autologoff.diff uploaded by dvossel (license 671)
Review: http://reviewboard.digium.com/r/225/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r189097 | mmichelson | 2009-04-17 15:20:23 -0500 (Fri, 17 Apr 2009) | 13 lines
Prevent a crash when SIP blonde transferring an unbridged call.
If one attempts to use the attended transfer button on a SIP phone
to transfer an unbridged call (such as a call to an IVR) but hangs
up while the target of the transfer is still ringing, we need to not
crash.
The problem was that ast_hangup was called from outside the channel
thread.
AST-211
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@189101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r188947 | file | 2009-04-17 11:44:56 -0300 (Fri, 17 Apr 2009) | 22 lines
Merged revisions 188946 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188946 | file | 2009-04-17 11:41:25 -0300 (Fri, 17 Apr 2009) | 15 lines
Fix a bug where a value used to create the channel name was bogus.
This commit fixes the scenario where an incoming call is authenticated
using a peer entry. Previously the channel name was created using either
the username setting from the sip.conf entry or the IP address that the
call came from. Now the channel name will be created using the peer name
itself. This commit will not change the way the channel name is generated
for users or friends.
(closes issue #14256)
Reported by: Nick_Lewis
Patches:
chan_sip.c-chname.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis, file
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r188647 | dvossel | 2009-04-15 17:10:04 -0500 (Wed, 15 Apr 2009) | 18 lines
Merged revisions 188646 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188646 | dvossel | 2009-04-15 17:08:40 -0500 (Wed, 15 Apr 2009) | 12 lines
National prefix inserted even when caller ID not available
When the caller ID is restricted, the expected behavior is for the caller id to be blank. In chan_dahdi, the national prefix is placed onto the callers number even if its restricted (empty) causing the caller id to be the national prefix rather than blank.
(closes issue #13207)
Reported by: shawkris
Patches:
national_prefix.diff uploaded by dvossel (license 671)
Review: http://reviewboard.digium.com/r/220/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@188648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
