Echo()'s description states that it echoes audio, video, and DTMF except for #
while it actually echoes any frame that it receives other than DTMF #. This
was causing frame storms in the test suite in some circumstances where Echo()
was attached to both ends of a pair of local channels and control frames
were being periodically generated. Echo()'s behavior and description have
been modifed so that it only echoes media and non-# DTMF frames.
........
Merged revisions 360033 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360034 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added 'b' and 'B' options to Dial. These options will allow you to run
last-minute dialplan on the caller and callee channels while the Dial
application is executing, but before the call is started. For example you
can use the 'b' option to run dialplan on the callee channel to get the name
of the newly created channel right away.
Review: https://reviewboard.asterisk.org/r/1229/
(closes issue: ASTERISK-19548)
Reported by: Mark Murawski
Tested by: Mark Murawski, Stefan Schmidt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Milliwatt is vulnerable to a remotely exploitable stack overrun when using
the 'o' option. This occurs due to the milliwatt_generate function not
accounting for AST_FRIENDLY_OFFSET when calculating the maximum number of
samples it can put in the output buffer.
This patch resolves this issue by taking into account AST_FRIENDLY_OFFSET
when determining the maximum number of samples allowed. Note that at no
point is remote code execution possible. The data that is written into the
buffer is the pre-defined Milliwatt data, and not custom data.
(closes issue ASTERISK-19541)
Reported by: Russell Bryant
Tested by: Matt Jordan
Patches:
milliwatt_stack_overrun.rev1.txt by Russell Bryant (license 6283)
Note that this patch was written by Russell, even though Matt uploaded it
........
Merged revisions 359645 from http://svn.asterisk.org/svn/asterisk/branches/1.6.2
........
Merged revisions 359656 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359694 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When connected line support was added, the wait_for_answer() variable
single changed its meaning slightly. Unfortunately, the places where
single was used did not necessarily get updated to reflect that change.
Also audio/video frames were sent to all forked calls when the endpoints
were never made compatible.
* Don't pass audio/video media frames when the channels have not been made
compatible.
* Added handling of AST_CONTROL_SRCCHANGE to app_dial.c.
* Fixed app_dial.c passing on AST_CONTROL_HOLD because that frame can also
pass a requested MOH class.
(closes issue ASTERISK-16901)
Reported by: Chris Gentle
(closes issue ASTERISK-17541)
Reported by: clint
Review: https://reviewboard.asterisk.org/r/1805/
........
Merged revisions 359344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359355 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change restores functionality that was present in 1.4, when AEL macros
were implemented with the Macro dialplan application. Macros are fraught with
functionality issues, because they consume a large portion of the underlying
application stack. This limits the ability of AEL users to call many layers
of subroutines, an issue which Gosub does not have (originally tested to
100,000 levels deep). Therefore, starting in 1.6.0, AEL macros were
implemented with Gosub.
However, there were some implicit behaviors of Macro, which were not replicated
at the same time as with the transition to Gosub, one of which is documented in
the related issue. In particular, the "h" extension is designed to execute not
in the Macro context, but in the topmost calling context. Due to legacy issues
with a misapplied bugfix many years ago, when a macro exited in 1.4, it looks
in all calling contexts, bubbling up from the deepest level until it finds an
"h" extension.
Since AEL hides the complexity of the underlying dialplan logic from the AEL
programmer, it's reasonable to assume that this behavior should not change in
the transition from Asterisk 1.4 LTS to Asterisk 1.8 LTS, lest we break
working AEL configurations in the transition to Asterisk 1.8 LTS. This fix
is the result, which implements a search for the "h" extension in all calling
Gosub contexts.
Fixes ASTERISK-19336
Patch: 20120308__ael_bugfix_for_trunk__2.diff (License #5003) by Tilghman Lesher
(with slight modifications for 1.8)
Tested by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/1776/
........
Merged revisions 358810 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358811 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This should (and does in my testing) act just like the Dial option of the same name.
This allows a queue member to be transfered to the next priority (no args), or to
a context/extension/priority similar to goto (with args context^extension^priority)
when a caller hangs up on them.
(closes issue ASTERISK-19283)
Reported by: To
Patches:
queue_f-v3.diff uploaded by To (license 6347)
Review: https://reviewboard.asterisk.org/r/1785/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the stack frame is allocated, we save the address to which we should
return, when the Gosub returns. However, if we just want to restore the
priority, then we need to subtract 1 before setting it. Otherwise, when
a Gosub goes to a nonexistent address, it will skip a priority in the
dialplan. This is because when we return from an application, the PBX
increments the priority for us.
........
Merged revisions 357416 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357421 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r354890, a memory leak in app_voicemail was fixed by properly disposing of
the allocated heard/deleted pointers. However, there are situations,
particularly when no messages are found in a folder, where these pointers are
not allocated and not NULL. In that case, an invalid free would be attempted,
which could crash app_voicemail. As there are a number of code paths where
this could occur, this patch uses the number of messages detected in the folder
before it attempts to free the pointers. This resolves the crash detected in
the Asterisk Test Suite's check_voicemail_nominal test.
........
Merged revisions 356797 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356798 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This simply fixes the compilation issue introduced in r354429 by
re-adding the 'quote' variable.
(closes issue ASTERISK-19337)
Reported by: John Taylor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
