........
r369436 | twilson | 2012-06-27 15:58:51 -0500 (Wed, 27 Jun 2012) | 17 lines
AST-2012-010: Clean up after a reinvite that never gets a final response
The basic problem is that if a re-INVITE is sent by Asterisk and it receives a
provisional response, but no final response, then the dialog is never torn
down. In addition to leaking memory, this also leaks file descriptors and will
eventually lead to Asterisk no longer being able to process calls.
This patch just keeps track of whether there is an outstanding re-INVITE, and if
there is goes ahead and cleans up everything as though there was no outstanding
reinvite.
Review: https://reviewboard.asterisk.org/r/2009/
(closes issue ASTERISK-19992)
Reported by: Steve Davies
Tested by: Steve Davies, Terry Wilson
........
r369557 | twilson | 2012-07-03 09:27:02 -0500 (Tue, 03 Jul 2012) | 11 lines
Better handle re-INVITEs with provisional but no final repsonses
A previous attempt at fixing this issue had negative side effects related
to attended transfers which this patch should resolve. Many thanks to
Steve Davies for all of the good suggestions and testing.
(closes issue ASTERISK-19992)
Reported by: Steve Davies
Tested by: Steve Davies, Terry Wilson
Review: https://reviewboard.asterisk.org/r/2009/
........
r369579 | twilson | 2012-07-03 11:58:16 -0500 (Tue, 03 Jul 2012) | 8 lines
More improvements to re-INVITEs timing out after a provisional response
There is no need to call check_pendings() on a final response to an INVITE
when destroying the scheduler entry as it will be done later during normal
processing.
(issue ASTERISK-19992)
........
r369626 | mjordan | 2012-07-05 12:01:52 -0500 (Thu, 05 Jul 2012) | 16 lines
Do not send a BYE when a provisional response arrives during a re-INVITE
Commits r369557 and r369579 were done to improve handling of re-INVITEs
when the UA that was supposed to receive the re-INVITE fails to respond.
A limitation of those patches occurred when a UA sent a provisional
response to the re-INVITE. This triggered a sending of a BYE in
check_pending. This patch tweaks the handling of the re-INVITE such that
a BYE is not sent in response to those messages.
(issue ASTERISK-19992)
Reported by: Steve Davies
Tested by: Steve Davies
patches:
(reinvite_tweak.diff license #5012 by Steve Davies)
........
r369652 | kmoore | 2012-07-05 14:01:52 -0500 (Thu, 05 Jul 2012) | 22 lines
AST-2012-011: Resolve heap corruption issue with voicemail
The heard and deleted arrays in the voicemail state structure were not
handled properly following the memory leak fix in r354890 and a fix for
an invalid free in r356797. This could result in accessing and writing
into freed memory. The allocation for these arrays has been reworked
to avoid the possibility of invalid frees, access of freed memory, and
crashes that were occurring as a result of this.
Locking around accesses and modifications of the voicemail state
structure members dh_arraysize, heard, and deleted has been added to
prevent simultaneous modification and access when IMAP storage is in
use. If IMAP storage is not in use, this locking is not compiled in.
Review: https://reviewboard.asterisk.org/r/1994/
(closes issue ASTERISK-19923)
Reported by: Dan Delaney
Tested by: Dan Delaney, Julian Yap
Patches:
vm_alloc_fix.diff uploaded by kmoore (license 6273)
........
r372628 | rmudgett | 2012-09-07 17:06:29 -0500 (Fri, 07 Sep 2012) | 5 lines
Remove annoying unconditional debug message from INC/DEC functions.
(closes issue AST-1001)
Reported by: Guenther Kelleter
........
Merged revisions 369436,369557,369579,369626,369652,372628 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/1.8.11@375568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
........
Merged revisions 373652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/1.8.11@375024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This includes the following
* r369351 for AST-883
* r368807 for AST-884
* r356604, r356650, r364203 for AST-890
* r370618 for AST-896
* r370205, r370273, r370360 for AST-916
* r371469 for AST-932
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/1.8.11@371651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is based on the review request posted by Walter Doekes
(referenced lower in the commit message)
The main fix here is to treat the IPorHost portion of the dial
string as a temporary outbound proxy. This ensures requests
get sent to the proper location.
Due to the age of the request, some parts were no longer relevant.
For instance, the request moved outbound proxy parsing code into
a single method. This is done in a previous commit, so it was not
necessary to do again.
Also, the review request fixed some errors with regards to request
routing for CANCEL and ACK requests. This has also been fixed in
more recent commits.
(closes issue ASTERISK-19677)
reported by Walter Doekes
Review https://reviewboard.asterisk.org/r/1859
........
Merged revisions 370769 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/1.8.11@370843 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP TCP/TLS worker threads were created joinable but noone could join
them if they died on their own.
* Fix the SIP TCP/TLS worker threads to not be created joinable.
* _sip_tcp_helper_thread() only needs one parameter since the pvt
parameter is only passed in as NULL and never used.
(closes issue ASTERISK-19203)
Reported by: Steve Davies
Review: https://reviewboard.asterisk.org/r/1714/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@356677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* fix: use %u instead of %d when dealing with CSeq numbers - to remove possibility of -ve numbers.
* fix: change all uses of seqno and friends (ocseq icseq) from 'int' or 'unsigned int' to uint32_t.
Summary of CSeq numbers.
An initial CSeq number must be less than 2^31
A CSeq number can increase in value up to 2^32-1
An incrementing CSeq number must not wrap around to 0.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1699/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353320 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a BLF subscription exists for long enough, using %d may print negative version numbers.
Unlikely, as 2^32 at 1 update per second is ~137 years, or half that before the versions number started going negative.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1694/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@352862 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch resolves the issue where MWI subscriptions are orphaned
by subsequent SIP SUBSCRIBE messages. When a peer is removed, either
by pruning realtime SIP peers or by unloading / loading chan_sip, the
MWI subscriptions that were orphaned would still be on the event engine
list of valid subscriptions but have a pointer to a peer that no longer
was valid. When an MWI event would occur, this would cause a seg fault.
(closes issue ASTERISK-18663)
Reported by: Ross Beer
Tested by: Ross Beer, Matt Jordan
Patches:
blf_mwi_diff_12_06_11.txt uploaded by Matt Jordan (license 6283)
Review: https://reviewboard.asterisk.org/r/1610/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@347058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The recent fix for ASTERISK-17288 to get RFC3578 SIP overlap support
working correctly removed a long standing ability to do overlap dialing
using DTMF in the early media phase of a call.
See ASTERISK-18702 it has a very good description of the issue.
I started with Pavel Troller's chan_sip.diff patch on issue
ASTERISK-18702.
* Added 'dtmf' enum value to sip.conf allowoverlap config option. The new
option value causes the Incomplte application to not send anything with
chan_sip so the caller can supply more digits via DTMF.
* Renames SIP_GET_DEST_PICKUP_EXTEN_FOUND to SIP_GET_DEST_EXTEN_MATCHMORE
since that is what it really means.
* Fixed get_destination() inconsistency with the pickup extension
matching.
* Fixed initialization of PAGE3 of global_flags in reload_config().
(closes issue ASTERISK-18702)
Reported by: Pavel Troller
Review: https://reviewboard.asterisk.org/r/1517/
Review: https://reviewboard.asterisk.org/r/1582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@345273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix bug ASTERISK-16558 which dealt with the order of responses to incoming
streams defined by SDP.
Fix unreported bug where offering multiple same-type streams would cause
Asterisk to reply with an incorrect SDP response missing one or more streams
without a proper declination.
Fix bugs related to a single non-audio stream being offered with responses
requesting codecs that were not offered in the initial invite along with an
additional audio stream that was not in the initial invite.
Review: https://reviewboard.asterisk.org/r/1516/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@344385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The domain matching code prior to 1.8 used to manually remove the port
from the host:port string when determining if an incoming request
matched the list of domains. When switching to the new parsing
functions, the documentation implied that the "domain" was being
returned by these functions, when instead it was returning the
"hostport" as defined by RFC 3261. This led to confusion and resulted
in 1.8+ rejecting an incoming request from x.x.x.x:xxxxx when
domain=x.x.x.x was set in sip.conf.
This patch renames the "domain" variables in the parsing functions to
"hostport" to more accurately describe what it is that they are
returning and also properly truncates the resulting hostport strings
when dealing with domain matching.
Review: https://reviewboard.asterisk.org/r/1574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@344215 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original REGISTERTRYING flag, in addition to being impossible to
check, also encroached on the space for the flag above it. This
patch moves the flags that were below REGISTERTRYING back to where
they were as though we had just removed the REGISTERTRYING option.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This option is not only useless, but has been broken since inception since
the flag was never copied from the peer where it is set to the pvt where
it was checked. RFC 3261 specificially states that you should not send a
provisional response to a non-INVITE request, and if we did fix the code
so that it worked, it would cause the same kind of user enumeration
vulnerability that we've discussed with the nat= setting. This patch
removes registertrying option and any code that would have sent a 100
response to a register.
Review: https://reviewboard.asterisk.org/r/1562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@343220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix potential deadlocks in SIP and IAX blind transfer to parking.
* Fix SIP, IAX, DAHDI analog, and MGCP channel drivers to respect the
parkext_exclusive option with transfers (Park(,,,,,exclusive_lot)
parameter). Created ast_park_call_exten() and ast_masq_park_call_exten()
to maintian API compatibility.
* Made masq_park_call() handle a failed ast_channel_masquerade() setup.
* Reduced excessive struct parkeduser.peername[] size.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@341254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you use the auth= parameter and do a "sip reload" while there is an
ongoing call. The peer->auth data points to free'd memory.
The patch does several things:
1) Puts the authentication list into an ao2 object for reference counting
to fix the reported crash during a SIP reload.
2) Converts the authentication list from open coding to AST list macros.
3) Adds display of the global authentication list in "sip show settings".
(closes issue ASTERISK-17939)
Reported by: wdoekes
Patches:
jira_asterisk_17939_v1.8.patch (license #5621) patch uploaded by rmudgett
Review: https://reviewboard.asterisk.org/r/1303/
JIRA SWP-3526
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@326291 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new option engaged, Asterisk should interpret user fields with useroptions
contained within the userfield of the uri by stripping them out of the original message
whenever a semicolon is encountered in the userfield string.
(closes issue #18344)
Reported by: danimal
Tested by: jrose
Review: https://reviewboard.asterisk.org/r/1223/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@319938 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@314628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@286931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The auth_options_request option was created to do authentication
on OPTIONS request just like INVITES are done. Since it has been
noted that some endpoints use OPTIONS requests as a way of qualifying
a peer and that a 401 authentication response could result in
interoperability issues, this option has been disabled by default.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@285006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OPTIONS requests should be treated the same as an INVITE
This includes authentication. This patch adds the ability for
incoming out of dialog OPTION requests to be authenticated
before providing a response indicating whether an extension
is available or not. The authentication routine works the
exact same way as it does for incoming INVITEs. This means
that if a peer has 'insecure=invite' in their peer definition,
the same will be true for the processing of the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/881/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283558 | dvossel | 2010-08-25 10:52:54 -0500 (Wed, 25 Aug 2010) | 10 lines
Asterisk will not advertise session timers are supported when 'session-timers=refuse' is used.
Asterisk now dynamically builds the "Supported" header depending
on what is enabled/disabled in sip.conf. Session timers used
to always be advertised as being supported even when they were disabled
in the configuration. This caused problems with some end points.
(issue #17005)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch modifies the way chan_sip.c does transaction to dialog
matching. Asterisk now stores information in the top most Via header
of the initial incoming request and compares that against other Requests
that have the same call-id. This results in Asterisk being able to
detect a forked call in which it has received multiple legs of the
fork. I completely stripped out the previous matching code and made
the comparisons a little more explicit and easier to understand. My
comments in the code should offer all the details involving this patch.
This patch also fixes a bug with the usage of the OBJ-MULTIPLE flag to
find multiple dialogs with the same call-id. Since the callback
function was returning (CMP_MATCH | CMP_STOP) only the first item
found was being returned. I fixed this by making a new callback
function for finding multiple dialogs that only returns (CMP_MATCH)
on a match allowing for multiple items to be returned.
Review: https://reviewboard.asterisk.org/r/776/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@279568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two changes here:
1. Since the externip setting can now have a port attached
to it, calling it "externip" is misleading. The option is now
documented and parsed as "externaddr." This also extends to the
"matchexterniplocally" setting. It is now documented and parsed
as "matchexternaddrlocally." The old names for the options may
still be used, but they are no longer used in the sip.conf.sample
file.
2. If no port is set for the externaddr, and UDP is the transport
to be used, then we will set the port of the externaddr to that of
the udpbindaddr. This was how things worked prior to the IPv6 merge,
so this is a regression fix.
(closes issue #17665)
Reported by: mmichelson
Patches:
17665.diff#2 uploaded by pprindeville (license 347)
Tested by: pprindeville
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip.conf configuration for the channel and for devices.
The Max-Forwards header is used to prevent loops in a SIP network. Each intermediary,
like SIP proxys and SBCs, decrement this counter and detects when it reaches zero,
at which point the SIP request is nicely killed in a SIP-friendly way.
Review: https://reviewboard.asterisk.org/r/778/
Thanks to dvossel for the review and good advice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Retransmission of packets should not be based on how many packets were
sent, but instead on a timeout period. Depending on whether or not the
packet is for a INVITE or NON-INVITE transaction, the number of packets
sent during the retransmission timeout period will be different, so
timing out based on the number of packets sent is not accurate.
This patch fixes this by removing the retransmit limit and only stopping
retransmission after a timeout period is reached. By default this
timeout period is 64*(Timer T1) for both INVITE and non-INVITE
transactions. For more information on sip timer values refer to
RFC3261 Appendix A.
Review: https://reviewboard.asterisk.org/r/749/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A failure when calling the get_destination can mean multiple things. If
the extension is not found, a 404 error is appropriate, but if the URI
scheme is incorrect, a 404 is not approperiate. This patch adds the
get_destination_result enum to differentiate between these and other failure
types. The only logical difference in this patch is that we now send a "416
Unsupported URI scheme" response instead of a "404" when the scheme is not
recognized. This indicates to the initiator of the INVITE to retry the request
with a correct URI.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 3261 section 8.2.2.3 states that if any unsupported options
are found in the Require header field, a "420 (Bad Extension)"
response should be sent with an Unsupported header field containing
only the unsupported options.
This is not currently being done correctly. Right now, if Asterisk
detects any unsupported sip options in a Require header the entire
list of options are returned in the Unsupported header even if some
of those options are in fact supported. This patch fixes that by
building an unsupported options character buffer when parsing the
options that can be sent with the 420 response. A unit test verifying
this functionality has been created. Some code refactoring was required.
Review: https://reviewboard.asterisk.org/r/680/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271689 | mnicholson | 2010-06-22 07:52:27 -0500 (Tue, 22 Jun 2010) | 8 lines
Modify chan_sip's packet generation api to automatically calculate the Content-Length. This is done by storing packet content in a buffer until it is actually time to send the packet, at which time the size of the packet is calculated. This change was made to ensure that the Content-Length is always correct.
(closes issue #17326)
Reported by: kenner
Tested by: mnicholson, kenner
Review: https://reviewboard.asterisk.org/r/693/
........
This change also adds an ast_str_copy_string() function (similar to ast_copy_string), that copies one ast_str into another, properly handling embedded nulls.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271690 65c4cc65-6c06-0410-ace0-fbb531ad65f3
According to RFC 3261 section 17.2.2, which describes non-INVITE server
transaction, when a dialog enters the Completed state it must destroy
the dialog after Timer J (T1*64) fires. For a BYE transaction Asterisk
terminates the dialog immediately during sip_hangup() when it should be
waiting T1*64 ms. This results in some odd behavior. For instance if
Asterisk receives a BYE and transmits a 200ok in response, if the endpoint
never receives the 200ok it will retransmit the BYE to which Asterisk
responds with a "481 Call leg/transaction does not exist" because the
dialog is already gone.
To resolve this I made a function called sip_scheddestroy_final(). This
differs slightly from sip_schedestroy() in that it enables a flag that
will prevent the destruction from ever being rescheduled or canceled
afterwards. It also prevents the pvt's needdestroy flag from being set
which triggers the destruction of the dialog within the do_monitor thread().
By using this function we are guaranteed destruction will not occur
until the scheduled time. This allows Asterisk to respond to any possible
retransmits for a dialog after we process the initial BYE request for T1*64 ms.
Other changes: I removed two instances where sip_cancel_destroy is used
right before calling sip_scheddestroy. sip_scheddestroy always calls
sip_cancel_destroy before scheduling the new destruction so it is completely
unnecessary.
Review: https://reviewboard.asterisk.org/r/694/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch breaks up every part of the sip registry string during
config parsing and removes all parsing from transmit_register().
Thanks to Nick_Lewis for contributing this patch!
(closes issue #14331)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domparse.patch uploaded by Nick Lewis (license 657)
chan_sip.c.patch uploaded by Nick Lewis (license 657)
chan_sip.c.domainparse3.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse4.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse5.patch uploaded by Nick Lewis (license 657)
nicklewispatch.diff uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
Review: https://reviewboard.asterisk.org/r/628/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
directmediapermit/directmediadeny support to restrict which peers can do
directmedia based on ip address. In some networks not all phones are fully
routed, i.e. not all phones can ping each other. This patch adds a way to
restrict directmedia for certain peers between certain networks.
(closes issue #16645)
Reported by: raarts
Patches:
directmediapermit.patch uploaded by raarts (license 937)
Tested by: raarts
Review: https://reviewboard.asterisk.org/r/467/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The example given within the related issue showed 120 lines, which was mostly
a result of the body being XML.
(closes issue #17179)
Reported by: khw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From the original issue report opened by Nick Lewis:
Many sip headers in many sip methods contain the ABNF structure
name-andor-addr = name-addr / addr-spec
Examples include the to-header, from-header, contact-header, replyto-header
At the moment chan_sip.c makes various different attempts to parse this name-andor-addr structure for each header type and for each sip method with sometimes limited degrees of success.
I recommend that this name-andor-addr structure be parsed by a dedicated function and that it be used irrespective of the specific method or header that contains the name-andor-addr structure
Nick has also included unit tests for verifying these routines as well, so...heck yeah.
(closes issue #16708)
Reported by: Nick_Lewis
Patches:
reqresp_parser-nameandoraddr2.patch uploaded by Nick Lewis (license 657
Review: https://reviewboard.asterisk.org/r/549
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
application is executing on a channel.
This patch addresses an issue found during working with end-users
using res_fax. If an incoming call is answered in the dialplan, or
jumps to the 'fax' extension due to reception of a CNG tone (with
faxdetect enabled), and then the remote endpoint sends a T.38
re-INVITE, it is possible for the channel's T.38 state to be
'T38_STATE_NEGOTIATING' when the application starts up. Unfortunately,
even if the application wants to use T.38, it can't respond to the
peer's negotiation request, because the AST_CONTROL_T38_PARAMETERS
control frame that chan_sip sent originally has been lost, and the
application needs the content of that frame to be able to formulate a
reply.
This patch adds a new 'request' type to AST_CONTROL_T38_PARAMETERS,
AST_T38_REQUEST_PARMS. If the application sends this request, chan_sip
will re-send the original control frame (with
AST_T38_REQUEST_NEGOTIATE as the request type), and the application
can respond as normal. If this occurs within the five second timeout
in chan_sip, the automatic cancellation of the peer reinvite will be
stopped, and the application will 'own' the negotiation process from
that point onwards.
This also improves the code path in chan_sip to allow sip_indicate(),
when called for AST_CONTROL_T38_PARAMETERS, to be able to return a
non-zero response, which should have been in place before since the
control frame *can* fail to be processed properly. It also modifies
ast_indicate() to return whatever result the channel driver returned
for this control frame, rather than converting all non-zero results
into '-1'. Finally, the new request type intentionally returns a
positive value, so that an application that sends
AST_T38_REQUEST_PARMS can know for certain whether the channel driver
accepted it and will be replying with a control frame of its own, or
whether it was ignored (if the sip_indicate()/ast_indicate() path had
properly supported failure responses before, this would not be
necessary).
This patch also modifies res_fax to take advantage of the new request.
In addition, this patch makes sip_t38_abort() actually lock the
private structure before doing its work... bad programmer, no donut.
This patch also enhances chan_sip's 'faxdetect' support to allow
triggering on T.38 re-INVITEs received as well as CNG tone detection.
Review: https://reviewboard.asterisk.org/r/556/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
