res_pjsip_log_forwarder has been renamed to res_pjproject
and enhanced as follows:
As a follow-on to the recent 'Add CLI "pjsip show buildopts"' patch,
a new ast_pjproject_get_buildopt function has been added. It
allows the caller to get the value of one of the buildopts.
The initial use case is retrieving the runtime value of
PJ_MAX_HOSTNAME to insure we don't send a hostname greater
than pjproject can handle. Since it can differ between
the version of pjproject that Asterisk was compiled against
and the version of pjproject that Asterisk is running against,
we can't use the PJ_MAX_HOSTNAME macro directly in Asterisk
source code.
Change-Id: Iab6e82fec3d7cf00c1cf6185c42be3e7569dee1e
When CDRs were refactored, func_cdr's ability to report high precision values
for duration and billsec (the 'f' option) was broken. This was due to func_cdr
incorrectly interpreting the duration/billsec values provided by the CDR engine
in milliseconds, as opposed to seconds. Since the CDR engine only provides
duration and billsec in seconds, and does not expose either attribute with
sufficient precision to merely pass back the underlying value, this patch fixes
the bug by re-calculating duration and billsec with microsecond precision based
on the start/answer/end times on the CDR.
ASTERISK-25179 #close
Change-Id: I8bc63822b496537a5bf80baf6102c06206bee841
This change makes the thread_timeout_thrash unit test wait for
each task to complete. This fixes the problem where the test would
prematurely end when all threads were gone and a new one had to be
started to handle the last task. It also increases the thrasing as
it is now more likely for each task to encounter the above scenario.
This also fixes a memory leak where the data for each task was not
being freed.
ASTERISK-25611 #close
Change-Id: I5017d621a4dc911f509074c16229b86bff2fb3c6
You have to call ast_taskprocessor_unref() outside of the taskprocessor
implementation code. Taskprocessor use since v12 has become more
transient than just the singleton uses in earlier versions.
Change-Id: If7675299924c0cc65f2a43a85254e6f06f2d61bb
This removes logchannels locking from init_logger_chain, puts the
responsibility on the caller. Adds locking around the one call that was
missing it.
ASTERISK-24833
Change-Id: I6cc42117338bf9575650a67bcb78ab1a33d7bad8
When the Asterisk is restared is not preseved reason paused of members.
This patch fixed this cases, retain data on astdb and set when Asterisk
is started.
ASTERISK-25732 #close
Report by: Rodrigo Ramírez Norambuena
Change-Id: Id3fb744c579e006d27cda4a02334ac0e4bed9eb5
Corrects the qualify_timeout column type from Integer to Decimal
ASTERISK-25686 #close
Reported-by: Marcelo Terres
Change-Id: I757d0e3c011ee9be6cd5abd48bc92441a405d3c8
The xferfailsound was read from the channel at the beginning of the transfer,
and that value is "cached" for the duration of the transfer. Therefore, changing
the xferfailsound on the channel using the FEATURE() dialplan function does
nothing once the transfer is under way.
This makes it so the transfer code instead gets the xferfailsound configuration
options from the channel when it is actually going to be used.
This patch also fixes a potential memory leak of the props object as well as
making sure the condition variable gets initialized before being destroyed.
ASTERISK-25696 #close
Change-Id: Ic726b0f54ef588bd9c9c67f4b0e4d787934f85e4
* Add freed regions totals to allocations and summary.
* Add totals for all allocations and not just the selected allocations.
Change-Id: I61d5a5112617b0733097f2545a3006a344b4032a
If the attended transfer destination answers (picks call up or goes to
voicemail) and then hangs up on the transferer then transferer hears the
fail sound.
This patch makes it so the fail sound is not played when the transfer
destination/target hangs up after answering.
ASTERISK-25697 #close
Change-Id: I97f142fe4fc2805d1a24b7c16143069dc03d9ded
Asterisk uses a Makefile macro to associate additional sources with a
module. This macro is responsible for creating clean targets but
previously left behind *.gcna and *.gcno files.
ASTERISK-25683 #close
Reported by yaron nahum
Change-Id: Idc0823fe80a25c42cefae901fde875e9fc38d8ea
Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
This issue was exposed when executing a connected line subroutine.
When connected or redirected subroutines or macros are executed it is
expected that the underlying applications and logic invoked are fast
and do not consume frames. In practice this constraint is not enforced
and if not adhered to will cause channels to continue when they shouldn't.
This is because each caller of the connected or redirected logic does not
check whether the channel has been hung up on return. As a result the
the hung up channel continues.
This change makes it so when the API to execute a subroutine or
macro is invoked the channel is checked to determine if it has hung up.
If it has then a hangup is queued again so the caller will see it
and stop.
ASTERISK-25690 #close
Change-Id: I1f9a8ceb1487df0389f0d346ce0f6dcbcaf476ea
There are two ways in which the reload() function in res_musiconhold can be
called from the CLI:
* module reload res_musiconhold.so
* moh reload
In the former case, the module loader holds a lock that prevents multiple
concurrent calls, but in the latter there is no such protection.
This patch changes the 'moh reload' CLI command to invoke the module loader
directly, rather than call reload() explicitly.
ASTERISK-25687 #close
Change-Id: I408968b4c8932864411b7f9ad88cfdc7b9ba711c
PJPROJECT has a function available to dump the compile time
options used when building the library.
* Add CLI "pjsip show buildopts" command.
* Update contrib/scripts/autosupport to get pjproject information.
Change-Id: Id93a6a916d765b2a2e5a1aeb54caaf83206be748
* changes:
Sorcery: Create human friendly serializer names.
Stasis: Create human friendly taskprocessor/serializer names.
taskprocessor.c: New API for human friendly taskprocessor names.
taskprocessor.c: Sort CLI "core show taskprocessors" output.
res_sorcery_realtime's search-by-regex callback performed a check to
ensure that the passed-in regex began with a caret (^). If it did not,
then no results would be returned.
This callback only started to become used when "like" support was added
to PJSIP CLI commands. The CLI command for listing objects would pass an
empty regex ("") to the sorcery backend if no "like" statement was
present. For most sorcery backends, this resulted in returning all
objects. However, for realtime, this resulted in returning no objects.
This commit seeks to fix the regression by removing the requirement from
res_sorcery_realtime for the passed-in-regex to begin with a caret.
ASTERISK-25689 #close
Reported by Marcelo Terres
Change-Id: I22b4dc5d7f3f11bb29ac2e42ef94682e9bab3b20
On a system with multiple ip addresses in the same subnet, if a
transport is bound to a specific ip address and endpoint/media_address
is set, the SIP/SDP will have the correct address in all fields but
the rtp stream MAY still originate from one of the other ip addresses,
most probably the "primary" ip address. This happens because
res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
the "all" ip address (0.0.0.0 or ::).
The new option causes res_pjsip_sdp_rtp/create_rtp to call
ast_rtp_instance_new with the endpoint's media_address (if specified)
instead of the "all" address. This causes the packets to originate from
the specified address.
ASTERISK-25632
ASTERISK-25637
Reported-by: Olivier Krief
Reported-by: Dan Journo
Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88
