This patch adds three new CLI commands:
- ari show apps: list the registered ARI applications
- ari show app: show detailed information about an ARI application
- ari set debug: dump events being sent to an ARI application
Note that while these CLI commands live in the res_stasis module, we use
the 'ari' family for these commands. This was done as most users of
Asterisk aren't aware of the semantic differences between ARI and
res_stasis, and some 'ari' CLI commands already exist.
ASTERISK-26488 #close
Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
This patch adds the Asterisk EID field to all outgoing ARI events.
Because this field should be added to all events as they are
transmitted, it is appended to the JSON message just prior to it being
handed off to the application message handler. This makes it somewhat
resilient to both new events being added to ARI, as well as other
potential event transport mechanisms.
ASTERISK-26470 #close
Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d
Announcer channels were not being destroyed because the
stasis_app_control structure that referenced them was not being
destroyed. The control structure was not being destroyed because it was
not being unlinked from its container. It was not being unlinked from
its container because the after bridge callback for the announcer
channel was not being run. The after bridge callback was not being run
because the after bridge datastore was not being removed from the
channel on destruction. The channel was not being destroyed because the
hangup that used to destroy the channel was now only reducing the
reference count to one. The reference count of the channel was only
being reduced to one because the stasis_app_control structure was
holding the final reference...
The control structure used to not keep a reference to the channel, so
that loop described above did not happen.
The solution is to manually remove the control structure from its
container when the playback on a bridge is complete.
ASTERISK-26083 #close
Reported by Joshua Colp
Change-Id: I0ddc0f64484ea0016245800b409b567dfe85cfb4
If you create a local channel and don't specify an originator channel
to take capabilities from, we automatically add all audio formats to
the new channel's capabilities. When we try to make the channel
compatible with another, the "best format" functions pick the best
format available, which in this case will be slin192. While this is
great for preserving quality, it's the worst for performance and
overkill for the vast majority of applications.
In the absense of any other information, adding all formats is the
correct thing to do and it's not always possible to supply an
originator so a new parameter 'formats' has been added to the channel
create/originate functions. It's just a comma separated list of formats
to make availalble for the channel. Example: "ulaw,slin,slin16".
'formats' and 'originator' are mutually exclusive.
To facilitate determination of format names, the format name has been
added to "core show codecs".
ASTERISK-26070 #close
Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b
The Location headers returned by:
* /bridges/{bridgeId}/play
* /bridges/{bridgeId}/record
* /channels/{channelId}/play
* /channels/{channelId}/record
Did not have the '/ari' prefix, and in the case of the 'play' resources, were
using 'playback' instead of 'playbacks.'
Change-Id: I957c58a3a1471bf477dae7c67faa1b74fcd9241c
The only caller of ari_bridges_play_found() has this note:
If ari_bridges_play_found fails because the channel is unavailable for
playback, The channel will be removed from the playback list soon. We can
keep trying to get channels from the list until we either get one that
will work or else there isn't a channel for this bridge anymore, in which
case we'll revert to ari_bridges_play_new.
Change-Id: Ib068141b367ccaa17be0dab4181c98e26c5127d6
The stasis_app_playback and stasis_app_recording structs need to have a
struct stasis_app_control ref. Other threads can get a reference to the
playback and recording structs from their respective global container.
These other threads can then use the control pointer they contain after
the control struct has gone.
* Add control ref to stasis_app_playback and stasis_app_recording structs.
With the refs added, the control command queue can now have a circular
control reference which will cause the control struct to never get
released if the control's command queue is not flushed when the channel
leaves the Stasis application. Also the command queue needs better
protection from adding commands if the control->is_done flag is set.
* Flush the control command queue on exit.
ASTERISK-25882 #close
Change-Id: I3cf1fb59cbe6f50f20d9e35a2c07ac07d7f4320d
* Now conf_alloc() has more off nominal error checking.
* Eliminated RAII_VAR() use in conf_alloc().
* Eliminated a dubius shortcut when destroying cfg->general in
conf_destructor() that would cause a crash if cfg->general failed to get
allocated.
* Add some ACO registration section comments.
Change-Id: Ia40c2b1b2d0777d641605118ae019c5a73865e1a
Need to finish initializing the string fields in the ao2 object before
putting any default strings into them.
ASTERISK-25383 #close
Reported by: yaron nahum
Change-Id: I9f7f3a03f0c4991a01593abf8697b9a587c0ea84
This patch adds support for receiving events regarding Peer status changes
and Contact status changes. This is particularly useful in scenarios where
we are subscribed to all endpoints and channels, where we often want to know
more about the state of channel technology specific items than a single
endpoint's state.
ASTERISK-24870
Change-Id: I6137459cdc25ce27efc134ad58abf065653da4e9
This patch adds the ability to subscribe to all events. There are two possible
ways to accomplish this:
(1) On initial WebSocket connection. This patch adds a new query parameter,
'subscribeAll'. If present and True, Asterisk will subscribe the
applications to all ARI events.
(2) Via the applications resource. When subscribing in this manner, an ARI
client should merely specify a blank resource name, i.e., 'channels:'
instead of 'channels:12354'. This will subscribe the application to all
resources of the 'channels' type.
ASTERISK-24870 #close
Change-Id: I4a943b4db24442cf28bc64b24bfd541249790ad6
This is a type mismatch fix of the debugging commit
c63316eec1 made to find out why
a testsuite test was failing only on one of the continuous
integration build agents.
Change-Id: Iba34f6e87cec331f6ac80e4daff6476ea6f00a75
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
Commit 39cc28f6ea attempted to fix a
test failure observed on 32 bit test agents by ensuring that a cast from
a 32 bit unsigned integer to a 64 bit unsigned integer was happening in
a predictable place. As it turns out, this did not cause test runs to
succeed.
This commit adds several redundant debug messages that print the payload
lengths of websocket frames. The idea here is that this commit will not
cause tests to succeed for the faulty test agent, but we might deduce
where the fault lies more easily this way by observing at what point the
expected value (537) changes to some ungangly huge number.
If you are wondering why something like this is being committed to the
branch, keep in mind that in commit
39cc28f6ea I noted that the observed test
failures only happen when automated tests are run. Attempts to run the
tests by hand manually on the test agent result in the tests passing.
Change-Id: I14a65c19d8af40dadcdbd52348de3b0016e1ae8d
We have seen a rash of test failures on a 32-bit build agent. Commit
48698a5e21 solved an obvious problem where
we were not encoding a 64-bit value correctly over the wire. This
commit, however, did not solve the test failures.
In the failing tests, ARI is attempting to send a 537 byte text frame
over a websocket. When sending a frame this small, 16 bits are all that
is required in order to encode the payload length on the websocket
frame. However, ast_websocket_write() thinks that the payload length is
greater than 65535 and therefore writes out a 64 bit payload length.
Inspecting this payload length, the lower 32 bits are exactly what we
would expect it to be, 537 in hex. The upper 32 bits, are junk values
that are not expected to be there.
In the failure, we are passing the result of strlen() to a function that
expects a uint64_t parameter to be passed in. strlen() returns a size_t,
which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit
unsigned value to somewhere where a 64-bit unsigned value is expected
would cause no problems. In fact, in manual runs of failing tests, this
works just fine. However, ast_websocket_write() uses the Asterisk
optional API, which means that rather than a simple function call, there
are a series of macros that are used for its declaration and
implementation. These macros may be causing some sort of error to occur
when converting from a 32 bit quantity to a 64 bit quantity.
This commit changes the logic by making existing ast_websocket_write()
calls use ast_websocket_write_string() instead. Within
ast_websocket_write_string(), the 64-bit converted strlen is saved in a
local variable, and that variable is passed to ast_websocket_write()
instead.
Note that this commit message is full of speculation rather than
certainty. This is because the observed test failures, while always
present in automated test runs, never occur when tests are manually
attempted on the same test agent. The idea behind this commit is to fix
a theoretical issue by performing changes that should, at the least,
cause no harm. If it turns out that this change does not fix the failing
tests, then this commit should be reverted.
Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
This patch adds support for push configuration of dynamic, i.e.,
sorcery, objects in Asterisk. It adds three new REST API calls to the
'asterisk' resource:
* GET /asterisk/{configClass}/{objectType}/{id}: retrieve the current
object given its ID. This returns back a list of ConfigTuples, which
define the fields and their present values that make up the object.
* PUT /asterisk/{configClass}/{objectType}/{id}: create or update an
object. A body may be passed with the request that contains fields to
populate in the object. The same format as what is retrieved using
the GET operation is used for the body, save that we specify that the
list of fields to update are contained in the "fields" attribute.
* DELETE /asterisk/{configClass}/{objectType}/{id}: remove a dynamic
object from its backing storage.
Note that the success/failure of these operations is somewhat
configuration dependent, i.e., you must be using a sorcery wizard that
supports the operation in question. If a sorcery wizard does not support
the create or delete mechanisms, then the REST API call will fail with a
403 forbidden.
ASTERISK-25238 #close
Change-Id: I28cd5c7bf6f67f8e9e437ff097f8fd171d30ff5c
Changed the unload mode to AST_FORCE_SOFT from AST_FORCE_FIRM,
which would unload a module even if it was in use.
* Changed unload mode to proper mode
ASTERISK-25173
Change-Id: If2402487b5bce05d9770f25f65f5c8e292ad5533
An http request can be sent to reload an Asterisk module. If the
module can not be reloaded or is not already loaded, an error
response will be returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, based
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be reloaded through http requests
ASTERISK-25173
Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1
An http request can be sent to unload an Asterisk module. If the
module can not be unloaded or is already unloaded, an error response
will be returned.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, depending
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be unloaded through http requests
ASTERISK-25173
Change-Id: I535a95f5676deb02651522761ecbdc0b00b5ac57
An http request can be sent to load an Asterisk module. If the
module can not be loaded or is loaded already, an error response
will be returned.
The command curl -v -u user:pass -X POST 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be loaded through http requests
ASTERISK-25173
Change-Id: I9e05d5b8c5c666ecfef341504f9edc1aa84fda33
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
Prior to this patch, when a WebSocket connection is made, ARI would not
be informed of the connection until after the WebSocket layer had
accepted the connection. This created a brief race condition where the
ARI client would be notified that it was connected, a channel would be
sent into the Stasis dialplan application, but ARI would not yet have
registered the Stasis application presented in the HTTP request that
established the WebSocket.
This patch resolves this issue by doing the following:
* When a WebSocket attempt is made, a callback is made into the ARI
application layer, which verifies and registers the apps presented in
the HTTP request. Because we do not yet have a WebSocket, we cannot
have an event session for the corresponding applications. Some
defensive checks were thus added to make the application objects
tolerant to a NULL event session.
* When a WebSocket connection is made, the registered application is
updated with the newly created event session that wraps the WebSocket
connection.
ASTERISK-24988 #close
Reported by: Joshua Colp
Change-Id: Ia5dc60dc2b6bee76cd5aff0f69dd53b36e83f636
Missed this module in the previous commit. res_ari_bridges uses symbols
from res_stasis_playback and res_stasis_recording.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f
The res_ari_device_states module depends on res_stasis_device_state,
not res_stasis_device_states.
Change-Id: I26e02ad37f9e36bcc859867e2fad1b90452ec3de
ARI modules that are generated by 'make ari-stubs' are all dependent on
res_ari_model. Additionally some of the same modules depend on one or more
res_stasis_* modules.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153
When the ChannelHold event was added, the 'musicclass' parameter was
erroneously removed. This caused the ChannelHold events to be rejected as
they failed model validation. This patch updates the Swagger schema such that
it now properly reflects the event that is being created.
Hooray for tests that catch things like this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes autological comparison warnings in the following:
* chan_skinny: letohl may return a signed or unsigned value, depending on the
macro chosen
* func_curl: Provide a specific cast to CURLoption to prevent mismatch
* cel: Fix enum comparisons where the enum can never be negative
* enum: Fix comparison of return result of dn_expand, which returns a signed
int value
* event: Fix enum comparisons where the enum can never be negative
* indications: tone_data.freq1 and freq2 are unsigned, and hence can never be
negative
* presencestate: Use the actual enum value for INVALID state
* security_events: Fix enum comparisons where the enum can never be negative
* udptl: Don't bother to check if the return value from encode_length is less
than 0, as it returns an unsigned int
* translate: Since the parameters are unsigned int, don't bother checking
to see if they are negative. The cast to unsigned int would already blow
past the matrix bounds.
* res_pjsip_exten_state: Use a temporary value to cache the return of
ast_hint_presence_state
* res_stasis_playback: Fix enum comparisons where the enum can never be
negative
* res_stasis_recording: Add an enum value for the case where the recording
operation is in error; fix enum comparisons
* resource_bridges: Use enum value as opposed to -1
* resource_channels: Use enum value as opposed to -1
Review: https://reviewboard.asterisk.org/r/4533
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4533.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434469 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some applications - such as SLA - a phone pressing hold should not behave
in the fashion that the Asterisk core would like it to. Instead, the hold
action has some application specific behaviour associated with it - such as
disconnecting the channel that initiated the hold; only playing MoH to channels
in the bridge if the channels are of a particular type, etc.
One way of accomplishing this is to use a framehook to intercept the
hold/unhold frames, raise an event, and eat the frame. Tasty. This patch
accomplishes that using a new dialplan function, HOLD_INTERCEPT.
In addition, some general cleanup of raising hold/unhold Stasis messages was
done, including removing some RAII_VAR usage.
Review: https://reviewboard.asterisk.org/r/4549/
ASTERISK-24922 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sending the following ARI commands caused Asterisk to crash if the JSON
body 'variables' object passes values of types other than strings.
POST /ari/channels
POST /ari/channels/{channelid}
PUT /ari/endpoints/sendMessage
PUT /ari/endpoints/{tech}/{resource}/sendMessage
* Eliminated RAII_VAR usage in ast_ari_channels_originate_with_id(),
ast_ari_channels_originate(), ast_ari_endpoints_send_message(), and
ast_ari_endpoints_send_message_to_endpoint().
ASTERISK-24751 #close
Reported by: jeffrey putnam
Review: https://reviewboard.asterisk.org/r/4447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses the following problems:
* ari/resource_channels: In ARI, we currently create a format capability
structure of SLIN and apply it to the new channel being created. This was
originally done when the PBX core was used to create the channel, as there
was a condition where a newly created channel could be created without any
formats. Unfortunately, now that the Dial API is being used, this has two
drawbacks:
(a) SLIN, while it will ensure audio will flows, can cause a lot of
needless transcodings to occur, particularly when a Local channel is
created to the dialplan. When no format capabilities are available, the
Dial API handles this better by handing all audio formats to the requsted
channels. As such, we defer to that API to provide the format
capabilities.
(b) If a channel (requester) is causing this channel to be created, we
currently don't use its format capabilities as we are passing in our own.
However, the Dial API will use the requester channel's formats if none
are passed into it, and the requester channel exists and has format
capabilities. This is the "best" scenario, as it is the most likely to
create a media path that minimizes transcoding.
Fixing this simply entails removing the providing of the format capabilities
structure to the Dial API.
* chan_pjsip: Rather than blindly picking the first format in the format
capability structure - which actually *can* be a video or text format - we
select an audio format, and only pick the first format if that fails. That
minimizes the weird scenario where we attempt to transcode between video/audio.
* res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure.
Since ast_request already limits us down to one format capability once the
format capabilities are passed along, there's no reason to squelch it here.
* channel: Fixed a comment. The reason we have to minimize our requested
format capabilities down to a single format is due to Asterisk's inability
to convey the format to be used back "up" a channel chain. Consider the
following:
PJSIP/A => L;1 <=> L;2 => PJSIP/B
g,u,a g,u,a g,u,a u
That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials
PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local
channel has inherited those format capabilities down the line; PJSIP/B
supports only ulaw. According to these format capabilities, ulaw is
acceptable and should be selected across all the channels, and no
transcoding should occur. However, there is no way to convey this: when L;2
and PJSIP/B are put into a bridge, we will select ulaw, but that is not
conveyed to PJSIP/A and L;1. Thus, we end up with:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
g g X u u
Which causes g722 to be written to PJSIP/B.
Even if we can convey the 'ulaw' choice back up the chain (which through
some severe hacking in Local channels was accomplished), such that the chain
looks like:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
u u u u
We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back
with only 'ulaw'. This results in all the channel structures being set up
correctly, but PJSIP/A *still* sending g722 and causing the chain to fall
apart.
There's a lot of difficulty just in setting this up, as there are numerous
race conditions in the act of bridging, and no clean mechanism to pass the
selected format backwards down an established channel chain. As such, the
best that can be done at this point in time is clarifying the comment.
Review: https://reviewboard.asterisk.org/r/4434/
ASTERISK-24812 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes it so that if a channel variable is requested and it does not exist
a 404 response will be returned instead of an allocation failed response. This makes
it easier to debug and figure out what is going on for a user.
ASTERISK-24677 #close
Reported by: Joshua Colp
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new feature to ARI to redirect a channel to another server,
and fixes a few bugs in PJSIP's handling of the Transfer dialplan
application/ARI redirect capability.
*New Feature*
A new operation has been added to the ARI channels resource, redirect. With
this, a channel in a Stasis application can be redirected to another endpoint
of the same underlying channel technology.
*Bug fixes*
In the process of writing this new feature, two bugs were fixed in the PJSIP
stack:
(1) The existing .transfer channel callback had the limitation that it could
only transfer channels to a SIP URI, i.e., you had to pass
'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is
still supported, it is somewhat unintuitive - particularly in a world full
of endpoints. As such, we now also support specifying the PJSIP endpoint to
transfer to.
(2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by
updating its Contact header. Alas, that resulted in the forwarding
destination set by the dialplan application/ARI resource/whatever being
rewritten with very incorrect information. Hence, we now don't bother
updating an outgoing response if it is a 302. Since this took a looong time
to find, some additional debug statements have been added to those modules
that update the Contact headers.
Review: https://reviewboard.asterisk.org/r/4316/
ASTERISK-24015 #close
Reported by: Private Name
ASTERISK-24703 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
One of the canonical reasons for hanging up a channel is because the far end
failed to answer - or because someone else answered, and we want to get rid of
this channel. This patch adds the missing value to the 'reason' query parameter
for the DELETE /channels operation.
Review: https://reviewboard.asterisk.org/r/4400
ASTERISK-24745 #close
Reported by: Ben Merrills
patches:
add_no_answer_ari_hangup_cause.diff uploaded by Ben Merrills (License 6678)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch improves the documentation of ARI on the wiki. Specifically, it
addresses the following:
* Allowed values and allowed ranges weren't documented. This was particularly
frustrating, as Asterisk would reject query parameters with disallowed values
- but we didn't tell anyone what the allowed values were.
* The /play/id operation on /channels and /bridges failed to document all of
the added media resource types.
* Documentation for creating a channel into a Stasis application failed to
note when it occurred, and that creating a channel into Stasis conflicts with
creating a channel into the dialplan.
* Some other minor tweaks in the mustache templates, including italicizing the
parameter type, putting the default value on its own sub-bullet, and some
other nicities.
Review: https://reviewboard.asterisk.org/r/4351
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this changeset, posting to the: /ari/bridges/{bridgeId} endpoint without specifying a value for the [name] query parameter, would crash Asterisk if the bridge you are attempting to create (or update) had the same ID as an existing bridge. The internal mechanism of the POST operation interpreted a null value for name, thus resulting in an error condition that crashed Asterisk.
ASTERISK-24560 #close
Reported By: Kinsey Moore
Review: https://reviewboard.asterisk.org/r/4349/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this patch, the following two ARI commands
POST /channels
POST /channels/{id}/continue
Accept a new parameter, label, that can be used to continue to or originate
to a priority label in the dialplan.
Because this is adding a new parameter to ARI commands, the API version of
ARI has been bumped from 1.6.0 to 1.7.0.
This patch comes courtesy of Nir Simionovich from Greenfield Tech. Thanks!
ASTERISK-24412 #close
Reported by Nir Simionovich
Review: https://reviewboard.asterisk.org/r/4285
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430337 65c4cc65-6c06-0410-ace0-fbb531ad65f3
