We should not try to send a SIP response message because we may be
restoring a persistent subscription where we are not responding to a SIP
request.
Change-Id: Id89167ef90320c5563f37e632db0dda6cb9e7dec
ast_sip_pubsub_register_body_generator() did not account for the null
terminator set by sprintf() in the allocated output buffer.
Change-Id: I388688a132e479bca6ad1c19275eae0070969ae2
The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
We will only rewrite the Contact header if there is no Record-Route header in
the received request. If a malfunctioning proxy places a Record-Route header
into a REGISTER request, we will decide that we shouldn't update the IP/port
in the Contact header, and we will end up storing a contact with an AoR that
contains the NAT'd IP address.
While it is nice to have the proxy *not* send a Record-Route in a REGISTER
request, it's also a good idea to not process the header in a non-dialog
message. This patch updates the code to explicitly ignore the Record-Route
header in REGISTER requests.
ASTERISK-25387 #close
Change-Id: I4bd3bcccc4003d460cc354d986b0dea2e433ef3f
Make certain that the pjsip session has not failed to
allocate the format capabilities structure, which can
otherwise cause a crash when referenced.
ASTERISK-25323
Change-Id: I602790ba12714741165e441cc64a3ecde4cb5750
In Asterisk 11, the announcer channel would receive channel variables
from the channel being parked by means of normal channel inheritance.
This functionality was lost during the big res_parking project in
Asterisk 12. This patch restores that functionality.
ASTERISK-25369 #close
Review: https://gerrit.asterisk.org/#/c/1180/
Change-Id: Ie47e618330114ad2ea91e2edcef1cb6f341eed6e
In working through a recent ICE negotiation bug, I found the debug
logging in res_rtp_asterisk to be lacking. This patch adds a number of
debug and warning statements that were helpful.
Change-Id: I950c6d8f13a41f14b3d6334b4cafe7d4e997be80
In the wild it is possible for Contact URIs to be quite long as
parameters can exist on them. This can present a problem when storing
them in the AstDB as the URI is used as part of the object name and
there is a fixed length limit for the AstDB. This will cause
the contact to not get stored.
This change uses the MD5 hash of the Contact URI as part of the
object name instead. This has a fixed length which is guaranteed
to not exceed the AstDB length limit.
ASTERISK-25295 #close
Change-Id: Ie8252a75331ca00b41b9f308f42cc1fbdf701a02
When an AoR is deleted by an external mechanism, such as through ARI, we
currently do not remove dynamic contacts that were created for that AoR as a
result of a received REGISTER request. As a result, re-creating the AoR will
cause the dynamic contact to be interpreted as a persistent contact, leading
to some rather strange state being created for the contacts/endpoints.
This patch adds a sorcery observer for the 'aor' object. When a delete is
issued on the underlying sorcery object, the observer is called, and all
contacts created and persisted in sorcery for that AoR are also removed. Note
that we don't want to perform this action when an AO2 object that is an AoR is
destroyed, as the AoR can still exist in the backing storage (and we would
thus be removing valid contacts from an AoR that still "exists".)
ASTERISK-25381 #close
Change-Id: I6697e51ef6b2858b5d63401f35dc378bb0f90328
We were passing the wrong count into pj_ice_sess_create_check_list(),
causing the create to fail if we ever received more than PJ_ICE_MAX_CAND
candidates.
Change-Id: I0303d8e1ecb20a8de9fe629a3209d216c4028378
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
Pjsip is refusing to use unsecure transport with "sips" in url.
WSS should be considered as secure transport.
ASTERISK-24602 #comment Partially fixed by setting WSS as secure
Change-Id: Iddac406c6deba6240c41a603b8859dfefe1a5353
When sending a stateful response, creation of the transaction can fail,
most commonly because we are trying to create a transaction from a
retransmitted request. When creation of the transaction fails, we end up
leaking a reference to a contact that was bumped when the response was
created.
This patch adds the missing deref and fixes the reference leak.
Change-Id: I2f97ad512aeb1b17e87ca29ae0abacb4d6395f07
A recent change to res_pjsip_pubsub switched to using pjsip_msg_print as
a means of writing an appropriate packet to persistent storage. While
this partially solved the issue, it had its own problems.
pjsip_msg_print will always add a Content-Length header to the message
it prints. Frequent restarts of Asterisk can result in persistent
subscriptions being written with five or more Content-Length headers. In
addition, sometimes some apparent corruption of individual headers could
be seen.
This aims to fix the problem by not running a parsed message through an
interpreter but rather by taking the raw message and saving it. The
logic for what to save is going to be different depending on whether a
SUBSCRIBE was received from the wire or if it was pulled from
persistence. When receiving a packet from the wire, when using a
streaming transport, the rdata->pkt_info.packet may contain multiple SIP
messages or fragments. However, the rdata->msg_info.msg_buf will always
contain the current SIP message to be processed. When pulling from
persistence, though, the rdata->msg_info.msg_buf will be NULL since no
transport actually handled the packet. However, since we know that we
will always ever pull one SIP message from persistence, we are free to
save directly from rdata->pkt_info.packet instead.
ASTERISK-25365 #close
Reported by Mark Michelson
Change-Id: I33153b10d0b4dc8e3801aaaee2f48173b867855b
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
When a BYE request is received the PJSIP invite session implementation
creates and sends a 200 OK response before we are aware of it. This
causes the INVITE session state callback to be called into and ultimately
the session supplements run on the BYE request. Once this response has
been sent the normal transaction state callback is invoked which
invokes the session supplements on the BYE request again. This can
be problematic in particular with res_pjsip_rfc3326 as it may
attempt to update the hangup cause code on the channel while it is
in the process of being hung up.
This change makes it so the session supplements are only invoked
once by the INVITE session state callback.
ASTERISK-25318 #close
Change-Id: I69c17df55ccbb61ef779ac38cc8c6b411376c19a
If the ast_strndup() call fails to allocate a copy of the
transport string for parsing, fail gracefully.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: Ia4b905ce6d03da53fea526224455c1044b1a5a28
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
When recreating a subscription it is possible for a freed sub_tree
to be referenced when the initial NOTIFY fails to be created.
Change-Id: I681c215309aad01b21d611c2de47b3b0a6022788
When an endpoint is backed by a non-static conf file backend (such as
the AstDB or Realtime), the 'auth' object may be returned as being an
empty string. Currently, res_pjsip will interpret that as being a valid
auth object, and will attempt to authenticate inbound requests. This
isn't desired; is an auth value is empty (which the name of an auth
object cannot be), we should instead interpret that as being an invalid
auth object and skip it.
ASTERISK-25339 #close
Change-Id: Ic32b0c6eb5575107d5164a8c40099e687cd722c7
This is a type mismatch fix of the debugging commit
c63316eec1 made to find out why
a testsuite test was failing only on one of the continuous
integration build agents.
Change-Id: Iba34f6e87cec331f6ac80e4daff6476ea6f00a75
When sending an RTP keepalive, we need to be sure we're not dealing with
a NULL RTP instance. There had been a NULL check, but the commit that
added the rtp_timeout and rtp_hold_timeout options removed the NULL
check.
Change-Id: I2d7dcd5022697cfc6bf3d9e19245419078e79b64
Due to the use of ast_websocket_close in session termination it is
possible for the underlying socket to already be closed when the
session is terminated. This occurs when the close frame is attempted
to be written out but fails.
Change-Id: I7572583529a42a7dc911ea77a974d8307d5c0c8b
The res_http_websocket module will currently attempt to close
the WebSocket connection if fatal cases occur, such as when
attempting to write out data and being unable to. When the
fatal cases occur the code attempts to write a WebSocket close
frame out to have the remote side close the connection. If
writing this fails then the connection is not terminated.
This change forcefully terminates the connection if the
WebSocket is to be closed but is unable to send the close frame.
ASTERISK-25312 #close
Change-Id: I10973086671cc192a76424060d9ec8e688602845
If the saved SUBSCRIBE message is not parseable for whatever reason then
Asterisk could crash when libpjsip tries to parse the message and adds an
error message to the parse error list.
* Made ast_sip_create_rdata() initialize the parse error rdata list. The
list is checked after parsing to see that it remains empty for the
function to return successful.
ASTERISK-25306
Reported by Mark Michelson
Change-Id: Ie0677f69f707503b1a37df18723bd59418085256
This patch adds the .get callback to the format attribute module, such
that the Asterisk core or other third party modules can query for the
negotiated format attributes.
Change-Id: Ia24f55cf9b661d651ce89b4f4b023d921380f19c
We don't have a compatability function to fill in a missing htobe64; but
we already have one for the identical htonll.
Change-Id: Ic0a95db1c5b0041e14e6b127432fb533b97e4cac
